![]() |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
thanks I'll just call them.
I really like the gas struts for the hatch that you did. For mine with the lift i have I can't get the hatch to fully upen to use the factory slider lifts. once this thing is road worthy I have a 69 gmc 2wd burb that i want to drag home and cut it up into a 2door 69 tahoe. the body is just toast but the right cuts will get all the rust out. and make a dialy driver with a basic 350 and a 700r4. |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Any word on the taillights....... Just wondering if I was right... probly not but its worth a shot..
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
more pics Rob!!!!! I can't wait to see this one finished.
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
5 Attachment(s)
Did a little panel fitting today. It actually looks like a truck again and got me a little motivated.:metal:
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Quote:
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
updates?
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
5 Attachment(s)
Just a small update. I sliced the passenger side rocker and have it lined up with the door now. Hopefully I will knock out the drivers side tomorrow.
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
i had never thought about doing that to my rockers to make them line up better. currently the bottom of my doors do not line up well, but the rest of the door does.
are those factory rockers? or did someone install them? |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Looks like the H2 lights to me. No cadi lights would fit like that.
This thing is sick, and helpfull too. On down the long road, Id like to drop mine onto the ground, and this thread has given my a real good look at the suspension. About how long did it take you to do the rockers, in hours? Mine are well rusted, so thats on my todo list... |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
looks good...thats the bad thing about all this work,,,just keeps snow balling..so far with all the junk ive owned,,i have never felt the urge to do a frame off..and dont and cant afford to do it now,,but will get the body right then later on worry about it..maybe after all kids are gone...
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Quote:
If you just have to replace the rocker, first one will probably take about 3 hrs. The other side will go quicker. Do the passenger side first, so if you mess up you don't have to see it every time you get into the truck. If you have to replace other stuff, (floors, inner rockers, dogleg) it will take more time. |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Quote:
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
they look like they will be h2's... just my educated guess though... coming from being a mini trucker, i've seen MANY cadillac conversions... they are all long and skinny... thats just my 17 year old guess though...
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Thanks for the info, Ill see about the floor later when its home. :eek:
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
3 Attachment(s)
Got the passenger side rocker fixed.
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
I need to order mine still. I'm gonna get mine through LMC.
and my 406 engine kit from Summit. my engine crossmember, spring plates and shackles should be here for this weekends work. |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
1 Attachment(s)
Quote:
Rob PS Here's a partial mock-up of the passenger side. |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Quote:
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Quote:
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
1 Attachment(s)
Quote:
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Rob,
I have a drivers side Goodmark swb bedside over my dad's house that I picked up to fix the wheel arch area on my burb(it was a damaged one). I will look at the taillight area, if it's OK, then you pay for shipping & it's yours... I won't be able to get up there until Saturday... Will let you know by Monday unless you want to call me on Sat night... L8R - Joe P.S. I'm getting "Progress Envy"... I want to work on mine :( I also have "Donkey Envy" ... I almost bought one of the "conversion" crewcabs right before my ex & I split up... It was very rough though... |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Joe,
If you take pics of the wheel arch areas that you need (or give me some dimensions), I may have your patches. Rob |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Looking good :metal:
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
5 Attachment(s)
Quote:
Well I thought I had fixed all the rust until I media stripped it and found a some more on the 3rd door rocker lip and floor section where the door seal goes. I had planned to just just repair the lip and patch the floor. But the more I thought about it, the more I figured I'd better fix it now or I would be kiicking myself in the butt in a couple of years when the rust finally popped through. So, I ordered a new rocker and cut the old one off. Just my luck, I cut off a perfectly good rocker. :o :rolleyes: It had a little bit of surface rust, but otherwise was in good shape. Guess it's better to be safe than sorry. On a better note, the new rocker fits great and will only require minor adjustments. The old rocker did come in handy, I'm using it for a patch in the curved floor section :metal: . |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
5 Attachment(s)
I removed the inner rocker (it basically unbolted) so I can make the repairs to the floor area. Here is the patch panel I made out of the old rocker, :/. The new rocker fits pretty well and will require only some minor trimming. Should get it blasted and primered so I can weld it back on this weekend.
R |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Great Project and thanks for all the progress pics. Hopefully when we get back from the Gulf, I'll get Blazer done and be able to drive it. Maybe around the same time you finish the Burb! Good to know a former EM is into trucks, I'm an ICCS on an aircraft carrier and have been into these since before the Navy. Keep up the good work and I'll keep watching from out here! Jeff.
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
5 Attachment(s)
Well I doesn't seem like much but I got the rust replaced in the drip rail on the inner rocker. It sure was a lot of welding for the few pin holes that were there (56 inches!!!!) :( . But now I can say it is rust free :) and I don't have to worry about it coming back. :metal: Just a little more trimming on the outer rocker and I should be able to weld it on.
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Quote:
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Quote:
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
yeah i'm keeping a close watch on I-10 for it lol, i new you would be asking that let me see what i can do i sold it about 2 years ago but i think i can still get i touch with the new owner. later paul
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
definately inspiration
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
1 Attachment(s)
I've got the 3rd door rocker welded in. A little bit more work on the driver's side rocker and then on to the tail lights. :metal:
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
5 Attachment(s)
Passenger side rockers are completely welded in. I also fixed the drivers side rocker so that it lines up with the door. All the rust has finally been repaired and now I get to play around with the tail lights. :D
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Looking good Rob, keep it up! :metal:
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
5 Attachment(s)
Not much progress in the last three weeks...... birthdays (wife's 40th, so I worked hard not to mess that up!), anniversary, and my son just started spring baseball. So, I got a little sidetracked but here's a small update. I got a set of buddy buckets with the CrewCab. Initially, I was just going to sell them, but then I decided they would probably be pretty cool in the suburban.:metal: I've stripped all the foam off of them and did some minor welding repair on one of the frames. Should have them blasted and painted next week and then they'll be ready for the new foam cushions I got from PICKMUP (thanks Frank) and then the new custom seat covers.
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Those will be cool in there!
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
Hi Rob
I have a question about my 69 burb with a 2 piece drive shaft, I am lowering mine approx 5.5" in the rear. Do I need to modify my carrier bearing mount. our does someone sell them already modified. Thanks John D |
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
I'm running bags and a 2" lowering block in the back (with a bolt in C-notch). I had no issue with my driveshafts. Hopefully that won't change when I put the 5.3/4L60E in. :)
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
How low does your your rear go. also did you have to change out or modifiy the trailing arm cross member.
|
Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
4 Attachment(s)
Quote:
|
All times are GMT -4. The time now is 12:31 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com