The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   What did you do to your truck today? (https://67-72chevytrucks.com/vboard/showthread.php?t=368988)

quickchevy 11-08-2009 08:28 PM

Re: What did you do to your truck today?
 
Opened the garage door and looked at it.:lol:

joe231 11-08-2009 08:45 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by sams60gmc (Post 3609175)
Picked up these yesterday. :metal:

whatcha gonna do with those?

sams60gmc 11-08-2009 08:49 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by joe231 (Post 3609234)
whatcha gonna do with those?


I'm going to run one of them after I shorten my frame. And I'm selling one to a guy at work. I'm in the market for some 60's style fenders tho.

MXmaniac 11-08-2009 08:51 PM

Re: What did you do to your truck today?
 
2 Attachment(s)
I put some new lug nuts on the front, put the driver's side fender back on. Then I went for a joyride with my girlfriend and taught her how to drive three-on-the-tree.

jgh64pkup 11-08-2009 08:53 PM

Re: What did you do to your truck today?
 
put the hood on it

Hottrucks 11-08-2009 09:00 PM

Re: What did you do to your truck today?
 
use it to haul the smoker to a freinds house...ok so it weighs about 6 lbs but I did put a full bag of charcoal in the bed and had 14 lbs of dry rubbed ribs in a cookie sheet on the pass floor..........

alot better than what it has been doing...yea still on cord wood duty maybe another coulpe weeks of that most everyday then the old girl is going to get a fluid change before winter.....

Hey MX gotte love them Texas Girls...does she have an older sister or single Mom?? If they love old trucks then I love them too......;)

Scot_Douglas 11-08-2009 09:18 PM

Re: What did you do to your truck today?
 
Drove about 100 miles taking the long way and back from a buddy's house. He loaned me a cherry picker and an engine stand. Got lots of looks cruising alone in the 66 with those things out back. :D

Slow Build 11-08-2009 09:39 PM

Re: What did you do to your truck today?
 
I drove mine over to check out lownslw64's ride (his build thread http://67-72chevytrucks.com/vboard/s...d.php?t=367652 ). When my truck grows up it wants to be just like that. His frame and suspension are pretty much done and done nice. You can tell he's not rushing things and doing them right. We talked for awhile and it sounds like we have alot of common goals for our trucks. It's great to see someone making good strides toward his goals, mine are still in dream, or more accurately delusional state. It inspired me though. I hope I can help him out sometime and get more inspired.

Great guy too. Showed me everything on the truck and shared alot of knowledge. I can't believe this is his first build. I'm hoping to run into him at the Goodguy's Get Together in Pleasanton next weekend (Nov 14-15) and by that man a beer.

Vernski 11-09-2009 01:13 AM

Re: What did you do to your truck today?
 
I've also read that folks are swapping out Holley 500's on these motors- any advice on the matter is appreciated.[/QUOTE] Monolith Here is a web site that may answer your questions about the Hollys.

http://www.6066gmcguy.org/holley.htm

Hope that helps.---Vernski:mm:

19GMC63 11-09-2009 01:21 AM

Re: What did you do to your truck today?
 
Cool thread Sam.
I didn't do much... replaced the heater wheel, OG one was making a racket. Wired in some courtesy lights with door jamb switches.
Might have a line on a posi 3.73 rear end... the 3.08 peg-leg and T5 is a bad combo.

sams60gmc 11-09-2009 01:28 AM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by 19GMC63 (Post 3609822)
Cool thread Sam.
.

Thank you:metal:

sams60gmc 11-09-2009 02:12 AM

Re: What did you do to your truck today?
 
1 Attachment(s)
Did this today. Also tagged my glove box.

Scot_Douglas 11-09-2009 09:20 AM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by sams60gmc (Post 3609881)
Did this today. Also tagged my glove box.

Nice work!

jbgroby 11-09-2009 09:28 AM

Re: What did you do to your truck today?
 
5 Attachment(s)
Monolith,

The change is not hard, you already have the rare part - "The Dual Intake", with out that you're dead in the water.

You need a holley 500 CFM carb, or another brand of your likin' and adaptor plate and you might need to make a new accelator linkage due to the dog leg you'll need, but other than that you're good to good. See webshots pics below.

http://rides.webshots.com/album/560082574YsEssM

monolith 11-09-2009 09:46 AM

Re: What did you do to your truck today?
 
Thanks a million for the advice guys! This site is a goldmine of encouragement and knowledge.

I'll be ordering a Holley 500 today after work, went around to my FLAPS's yesterday- no luck finding one in stock, have to order it.

creep 11-09-2009 07:02 PM

Re: What did you do to your truck today?
 
The Holley 500 is an easy swap. If I can do it anyone can. You will need to get an adapter to bolt it in. I'll try to post some pics a little later.

creep 11-09-2009 07:20 PM

Re: What did you do to your truck today?
 
http://i9.photobucket.com/albums/a91...p/DSC02870.jpg
http://i9.photobucket.com/albums/a91...p/DSC02872.jpg
http://i9.photobucket.com/albums/a91...p/DSC02874.jpg
http://i9.photobucket.com/albums/a91...p/DSC02876.jpg

You can see more about it in my thread http://67-72chevytrucks.com/vboard/s...d.php?t=354432

sams60gmc 11-09-2009 08:49 PM

Re: What did you do to your truck today?
 
Pulled the beds off the trailer flipped them over on a pallet and collected the money for one of them. Put them away and sprayed the bolts with rust penetrating stuff so I can pull the planks off later this week.

scotts62 11-09-2009 10:06 PM

Re: What did you do to your truck today?
 
Got the fuel pump changed, put new drive line in and fired up my 92 Xcab :metal:

Rusteeze64GB 11-10-2009 12:39 AM

Re: What did you do to your truck today?
 
rearranged some of the pins on my engine harness and hooked the battery up to see if I could get her to turn. She turns over nicely. I need to get some new head lights and bulbs so I can check to make sure everything works.

sams60gmc 11-10-2009 08:29 PM

Re: What did you do to your truck today?
 
Layed upder it for a while. Tried to figure out other ways to shorten the frame. Think I got carried away because the new plans are chopping it off behind the cab and fabbing up a new backhalf with C notches and bags. :metal:

Alan's Classic 11-10-2009 08:39 PM

Re: What did you do to your truck today?
 
Dreamed it was done.

198plus 11-10-2009 08:43 PM

Re: What did you do to your truck today?
 
I'm with you Alan..........Think I'll go back to sleep :lol:

Quote:

Originally Posted by Alan's Classic (Post 3613094)
Dreamed it was done.


JRBECK64 11-10-2009 09:54 PM

Re: What did you do to your truck today?
 
Almost started my Sons 64 on fire today. Was starting it and it back fired and flames were shooting out the carb. Need to fine tune the Timing. Looks like that will be tomorrows job.

JRBECK64

63deluxfleet 11-10-2009 10:42 PM

Re: What did you do to your truck today?
 
well. i washed her up today and i found a great spot by my house to take pictures so i capitalized on the photo op i think i did a good job for a rookie photographer!
go to my album i have 70+ pics http://s49.photobucket.com/albums/f2...CHEVY%20TRUCK/

Slow Build 11-10-2009 11:34 PM

Re: What did you do to your truck today?
 
Nice work Isaac. I'm really liking the 63 cab look. The knee knockers scared me away.

Lookin good.

scotts62 11-11-2009 12:22 AM

Re: What did you do to your truck today?
 
Cool pics 63deluxfleet! i like this one the best ;)
http://i49.photobucket.com/albums/f2...K/IMG_0093.jpg

AZ Chev Man 11-11-2009 01:33 AM

Re: What did you do to your truck today?
 
Rebuilt Carb

Took it for a test drive

Cussed at it as it coasted though my driveway as it wont start again....

:no:

bubba327 11-11-2009 01:51 AM

Re: What did you do to your truck today?
 
Mounted the transmission cooler and cooler lines. Then tried to make the kick-down cable reach and wished I could get it connected to the existing carb on the Inline six... Anybody have a turbo 350 behind a six cylinder and stock one barrel carb???
PLEASE send me a PM with how you hooked up the detent kick-down cable!!

DPowers 11-11-2009 10:44 PM

Re: What did you do to your truck today?
 
Completed my carb linkage, put my driveshaft together and started it up- just to hear it run.

Byronic 11-11-2009 10:52 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by bubba327 (Post 3613862)
Mounted the transmission cooler and cooler lines. Then tried to make the kick-down cable reach and wished I could get it connected to the existing carb on the Inline six... Anybody have a turbo 350 behind a six cylinder and stock one barrel carb???
PLEASE send me a PM with how you hooked up the detent kick-down cable!!

I have the same set up and can't get mine to reach. I'm still working on a solution.

AZ Chev Man 11-11-2009 10:52 PM

Re: What did you do to your truck today?
 
replaced accelerator pump and it started and got me to a job and back home, still runs bad...bypass fuel pump with electric fuel pump to make sure it was not the problem....IT wasn't

originalJD 11-12-2009 12:53 AM

Re: What did you do to your truck today?
 
I put a new starter in today. I'm alittle scared though. I might have torqued the bolts just a little too much. So far it's workin great.

DPowers 11-12-2009 10:48 AM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by AZ Chev Man (Post 3615412)
replaced accelerator pump and it started and got me to a job and back home, still runs bad...bypass fuel pump with electric fuel pump to make sure it was not the problem....IT wasn't

Is your filter clogged???

70 Suburban 11-12-2009 11:45 AM

Re: What did you do to your truck today?
 
check for a vaccume leak.... try starting fluid rpms raise or wd40 rpms drop around the base of the carb and around the intake.

SCOTI 11-13-2009 01:24 AM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by Tx Firefighter (Post 3607736)
I got a used engine and trans for my quick build 63 farm truck.

http://i276.photobucket.com/albums/k...rmtruck025.jpg

Tx, did you get it installed? Any issues?

Tx Firefighter 11-13-2009 08:15 AM

Re: What did you do to your truck today?
 
I took an extra day to clean it up and paint it. I installed it yesterday. Today will finish hooking it all up, detail wiring and such.

rgCarGuy 11-13-2009 10:26 AM

Re: What did you do to your truck today?
 
My ebay truck came in the middle of the night!

http://i261.photobucket.com/albums/i...B/IMAG0014.jpg

http://i261.photobucket.com/albums/i...B/IMAG0015.jpg

http://i261.photobucket.com/albums/i...B/IMAG0013.jpg

http://i261.photobucket.com/albums/i...B/IMAG0016.jpg

jbgroby 11-13-2009 10:43 AM

Re: What did you do to your truck today?
 
Gee Virginia there is a SANTA CLAUSE!

ChiefRocka 11-13-2009 10:49 AM

Re: What did you do to your truck today?
 
Went down to the DMV...and finally registered my truck....

The frickin 'Governator' took $226 of my hard earned money for that thing !!

And the tag is only good untill FEB !!

Man the lady at the counter real had a hard time...this truck came with the DMV paper all printed up from the guy.

However the OG owner donated to charity, then this guy bought it (owns a lot), then I got it.

So the pink was signed 3 times, we had 3 transfer forms....it had her going crazy !!

Now, I just got it get it running !!

So far...that little truck in my avatar has cost me $600 + $226 = $826 :lol:


http://i38.tinypic.com/jsinv8.jpg


All times are GMT -4. The time now is 10:37 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com