Re: started working on the 65 suburban
 

thats great you got to be pumped the hard work is paying off:metal:

Re: started working on the 65 suburban
 

congrats on getting her running. i got me one now i will post some pics in another thread later. it was a long 14 hour ride

Re: started working on the 65 suburban
 

Thanks i am super happy!! now the progress should get easier and i hope my progress gets oter people ready to attack there projects!!!
C.brown I may be getting the 3 pc engine cover tomorrow 50 bux!! I will let you know
Posted via Mobile Device

Re: started working on the 65 suburban
 

Thanks!!! I cant wait to see the pics of the suburban!!!
Posted via Mobile Device

Re: started working on the 65 suburban
 

ok here are some pics from saturday

Re: started working on the 65 suburban
 

here are some more pics

Re: started working on the 65 suburban
 

looks great where can i get some tailights like what you got

Re: started working on the 65 suburban
 

you need rear tail lights? if so let me know i will steer you in the right direction!!

Re: started working on the 65 suburban
 

Ok I could use some like you got the ones I have are just plastic lens no crhome like yours or is that the housing shining out around the housing
Posted via Mobile Device

Re: started working on the 65 suburban
 

That is the housing i dont think they repop them either let me look!
Posted via Mobile Device

Re: started working on the 65 suburban
 

Looking great Dude!

Re: started working on the 65 suburban
 

thanks it has been a long road but it is comming along good now!

Re: started working on the 65 suburban
 

so is it chromed or polished around the edges

Re: started working on the 65 suburban
 

it is aluminium it is the holder for the lense and the bulb

Re: started working on the 65 suburban
 

Ok I see I just need to clean mine they are covered in red primer .
Posted via Mobile Device

Re: started working on the 65 suburban
 

here ya go
http://67-72chevytrucks.com/vboard/s...40#post4974940

Re: started working on the 65 suburban
 

welcome to the suburban club!!!

Re: started working on the 65 suburban
 

got my new engine covers

Re: started working on the 65 suburban
 

Just went thru this entire thread ... Looking good man !!!

Great ... now I want a burban even worse !!:lol:

Good Job man !

Re: started working on the 65 suburban
 

hey thanks alot!!!!! there seems to be a few poping up cant wait to see progresson all of them!!!

i still see them on craigslist for reasonably cheap!! you should pic one up!!!!!

Re: started working on the 65 suburban
 

i agree they are out there

Re: started working on the 65 suburban
 

new covers on i like the look better!!!

Re: started working on the 65 suburban
 

looks good

Re: started working on the 65 suburban
 

should be able to take the first drive this comming weekend the corvette fuel regulator/filter couldnt handle the pressure from the aftermarket fuel pump it took a dump the engine still ran with only 12 psi!!!!! suppose to be 58-62!!! so i got a new fuel regulator that will handle anything hopefully pics on the road to come!!!

Re: started working on the 65 suburban
 

good luck an thats sucks

Re: started working on the 65 suburban
 

that looks awsome man, what size wheels are they?
thanks jon

Re: started working on the 65 suburban
 

Hey thanks the wheels are 20s right now i am looking at getting some 22s for just the rear in the next week or so
Posted via Mobile Device

Re: started working on the 65 suburban
 

You've done some really nice work.. Great looking burb

Re: started working on the 65 suburban
 

thanks for the comment this has been a long build due to the limited funds as almost everyone knows or is dealing with themselves!!! i hope to do wiring and some interior work over the winter body work and the rear wheel tubs and bridge cover in the spring hopefully some pics going down the road this weekend!!!!

Re: started working on the 65 suburban
 

ok the suburban hit the road did about 5 miles it didnt do to bad for no alignment and no rear brakes hit about 60 mph drove good but with no rear wheel wells mud and small rocks were flying i also had the old milk crate seat to ride on here is where the suburban will be for the winter now i am over a big hump in the road now on to getting the valves and compressor plumed and wired in and hopefully the full wiring in the truck.

Re: started working on the 65 suburban
 

looks awsome man, great job.
jon

Re: started working on the 65 suburban
 

Glad to hear it went well. I have that same seat for my pickup.

Re: started working on the 65 suburban
 

Thanks alot!!
Posted via Mobile Device

Re: started working on the 65 suburban
 

Thanks the seat was better than i thought but i had to hug the steering wheel at every start and hard curve!!!
Posted via Mobile Device

Re: started working on the 65 suburban
 

Looking great! My sub is a 4x4 and is miles apart from the one your building but the same in a strange way. Love the look of these lowered like that though.

Re: started working on the 65 suburban
 

congrats !!!

Re: started working on the 65 suburban
 

I want to see more superbird pics.

Re: started working on the 65 suburban
 

Hey thanks for the comments i really have grown to like the look of the suburban more and more and i am glad to see more and more showing up on the forum as projects!
Posted via Mobile Device

Re: started working on the 65 suburban
 

Thanks Dino!!
Posted via Mobile Device

Re: started working on the 65 suburban
 

I will get a couple up i figured i would get a little bit of interest in that!
Posted via Mobile Device