The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1991 Blazers, Jimmys, and Suburbans Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=37)
-   -   Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy (https://67-72chevytrucks.com/vboard/showthread.php?t=554172)

67cheby 12-07-2012 07:39 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
LOL...still at my real job until 6 ! But then i am going to look at a super nice 79 front clip !!

truckzilla 12-07-2012 07:42 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Ha! Real Job! Anyway, I hope that '79 front clip is exactly what you're looking for and that you can get it for a decent price! Best of luck!

What, did somebody say it was beer-thirty?
:lol:

black_sheep454 12-07-2012 08:30 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Ya it's probably nicer than you'd want to cut up, but I'd take 300 for it picked up. I'll also keep my eye out for a rough one.
Posted via Mobile Device

y5mgisi 12-07-2012 08:35 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Subscribed. Sounds like a cool build!

classicchev 12-07-2012 08:53 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Already eh!!!!!! wont even let the welder cool down and your at it again?

black_sheep454 12-07-2012 11:29 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
It's around Kansas city but it's super cheap if you can get a good deal on shipping.

http://kansascity.craigslist.org/pts/3431080414.html

67cheby 12-07-2012 11:44 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Quote:

Originally Posted by truckzilla (Post 5745940)
Ha! Real Job! Anyway, I hope that '79 front clip is exactly what you're looking for and that you can get it for a decent price! Best o
What, did somebody say it was beer-thirty?
:lol:

The front clip is amazing, I bought it plus a set of doors and a nice front bumper ! Pics tomorrow !
Quote:

Originally Posted by black_sheep454 (Post 5746012)
Ya it's probably nicer than you'd want to cut up, but I'd take 300 for it picked up. I'll also keep my eye out for a rough one.
Posted via Mobile Device

Thanks
Quote:

Originally Posted by y5mgisi (Post 5746022)
Subscribed. Sounds like a cool build!

Thank you
Quote:

Originally Posted by classicchev (Post 5746061)
Already eh!!!!!! wont even let the welder cool down and your at it again?

Lol, it's an addiction ! See ya at SEMA 2013 !
Quote:

Originally Posted by black_sheep454 (Post 5746351)
It's around Kansas city but it's super cheap if you can get a good deal on shipping.

http://kansascity.craigslist.org/pts/3431080414.html

Thanks man I will call him tomorrow !
Posted via Mobile Device

FRENCHBLUE72 12-08-2012 05:12 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Im in on page 7 man I need to get on the board more..

67cheby 12-08-2012 10:15 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
3 Attachment(s)
welcome aboard !! LOL, Well last night was a success, i picked up a killer front clip, set of doors and a early front bumper !! oh and i donked out the Jimmy !

oldman3 12-08-2012 11:28 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
All right, ready for SEMA:metal::fry::no:...Jim

raull 12-08-2012 12:21 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
the front clip looks in good shape !!!

moneyeater 12-08-2012 12:21 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
I´m curious what this square will look like and besides i love girls with their own trucks!
Volker

67cheby 12-08-2012 12:45 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Quote:

Originally Posted by oldman3 (Post 5746931)
All right, ready for SEMA:metal::fry::no:...Jim

what you dont like the DONK , bling/blingy look ? LOL
Quote:

Originally Posted by raull (Post 5747022)
the front clip looks in good shape !!!

it is VERY nice !
Quote:

Originally Posted by moneyeater (Post 5747023)
I´m curious what this square will look like and besides i love girls with their own trucks!
Volker

me too ! LOL

shawno72 12-08-2012 01:14 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
That donky must be for a honky. :lol:

mrhino 12-08-2012 01:50 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Quote:

Originally Posted by moneyeater (Post 5747023)
I´m curious what this square will look like and besides i love girls with their own trucks!
Volker

me three

babyblueoval 12-08-2012 02:45 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Quote:

Originally Posted by 67cheby (Post 5746847)
oh and i donked out the Jimmy !

Mike..................

I hate to tell you this but you have officially been banned from this sight from this day forward.
We've really enjoyed having you here and love Cloud 9 but this has taken you over the edge of board tollerance.

Have a merry Christmas.


lol

67cheby 12-08-2012 02:52 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Donk gettin no love !!

butternut1972 12-08-2012 09:32 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
So do you have a drawing of what it is going to look like that you want to share with us?

gringoloco 12-09-2012 12:19 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Yeah, we need a rendering!
Posted via Mobile Device

watahyahknow 12-09-2012 06:07 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
chassis will be a fast build he said ....... hmmmm does that mean a ready made chassis like one from allston chassisworks?
https://www.cachassisworks.com/image...24_drawing.jpg

jlsanborn 12-09-2012 11:50 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
I'm sure this clip swap must have been done before and I've just not come across one yet?? Aren't the cabs a bunch different at the cowl?

67cheby 12-09-2012 12:02 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Quote:

Originally Posted by butternut1972 (Post 5747810)
So do you have a drawing of what it is going to look like that you want to share with us?

We just finally landed the color so now we can proceed with the rendering !
Quote:

Originally Posted by gringoloco (Post 5748104)
Yeah, we need a rendering!
Posted via Mobile Device

Soon!
Quote:

Originally Posted by watahyahknow (Post 5748308)
chassis will be a fast build he said ....... hmmmm does that mean a ready made chassis like one from allston chassisworks?
https://www.cachassisworks.com/image...24_drawing.jpg

Lol, well not quite that ! But I do have some killer parts coming soon !
Quote:

Originally Posted by jlsanborn (Post 5748500)
I'm sure this clip swap must have been done before and I've just not come across one yet?? Aren't the cabs a bunch different at the cowl?

I will let you know in just a couple days ! Lol
Posted via Mobile Device

oldman3 12-09-2012 02:07 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Man this waiting is worse that being a kid on Xmas eve:m6:..Jim

classicchev 12-09-2012 02:24 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
I think its way easier going form new to old on the clips... Hinge position is the challenge. Should be simple, ecpecially when you get to eliminate the hinges on the fenders because you just have to install a set of Tubz anyways

watahyahknow 12-09-2012 05:30 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
i didnt know about the hinge locations but they shouldnt be to hard
i even think there mounted on the inner fenders
if they mounted in a different location on the bulkhead im sure that there allready dimples put in the sheetmetal where you need to drill the holes as the basic cabdesign hasnt changed
i just know that in one of the two setups (think it was the newer style) where theres an extra plate added under the frontwindow to cover up the hole left by the shorter bonnet / hood
the one without the extra sheetmetal allso has the shorter stalks where the wiperarms fit ontoo to get them to duck under the hoodedge when in the rest position
not sure how they mounted that extra bit of sheetmetal , it might be there spotwelded in but the sheetmetal under that is the same old or new style

made2drag 12-10-2012 10:28 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
this is gonna be a sweet ride! even sweeter cause its a husband/wife build! but you know after her k5 is done.....your gonna have to build a custom squarebody dually to pull these 2 to the shows......

67cheby 12-10-2012 10:44 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Quote:

Originally Posted by oldman3 (Post 5748681)
Man this waiting is worse that being a kid on Xmas eve:m6:..Jim

LOL, sorry man
Quote:

Originally Posted by classicchev (Post 5748706)
I think its way easier going form new to old on the clips... Hinge position is the challenge. Should be simple, ecpecially when you get to eliminate the hinges on the fenders because you just have to install a set of Tubz anyways

thats what i am talking about ! i am excited about the clip swap !
Quote:

Originally Posted by watahyahknow (Post 5748979)
i didnt know about the hinge locations but they shouldnt be to hard
i even think there mounted on the inner fenders
if they mounted in a different location on the bulkhead im sure that there allready dimples put in the sheetmetal where you need to drill the holes as the basic cabdesign hasnt changed
i just know that in one of the two setups (think it was the newer style) where theres an extra plate added under the frontwindow to cover up the hole left by the shorter bonnet / hood
the one without the extra sheetmetal allso has the shorter stalks where the wiperarms fit ontoo to get them to duck under the hoodedge when in the rest position
not sure how they mounted that extra bit of sheetmetal , it might be there spotwelded in but the sheetmetal under that is the same old or new style

we will see very soon !
Quote:

Originally Posted by made2drag (Post 5750178)
this is gonna be a sweet ride! even sweeter cause its a husband/wife build! but you know after her k5 is done.....your gonna have to build a custom squarebody dually to pull these 2 to the shows......

thanks man, next will be 88-98 so i can do the Slosh Tubz for that bodystyle and work my way through all the years !

67cheby'sGirl 12-10-2012 10:59 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Do you guys realize how hard it is to design perfection? It's really hard work. I have the exterior design just about nailed down, and now on to the interior design. Ready to have a rendering of it myself.. :)

67cheby 12-10-2012 11:13 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
"Perfection"......wow she is TOUGH !! LOL, now you can deffinately see the standards i have to meet come straight from the BOSS !

67cheby'sGirl 12-10-2012 11:17 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Very good observation, young grasshopper. Now, have you torn it apart yet?

67cheby 12-10-2012 11:19 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
GGGEEEEEEEEEEEEEEZZZZZZZZZZZ.....give me a break you had me Christmas shopping all weekend !

Zoomin 12-10-2012 11:45 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
*As the world turns* :)

JNJchev77 12-10-2012 11:56 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Quote:

Originally Posted by 67cheby (Post 5750236)
GGGEEEEEEEEEEEEEEZZZZZZZZZZZ.....give me a break you had me Christmas shopping all weekend !

Just concede.... you won't win this one :waah:

67cheby 12-10-2012 12:13 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
yea...i know, someone on the forum has a saying " A husband can be right, or he can be happy.....but he cant be both !" LOL

watahyahknow 12-10-2012 12:25 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
he can when he's single

oh whell you take the bad things with the good things , being alone isnt the way to go either

seem sumtin a while back :
RULE 1 the boss is allways right
RULE 2 if the boss is wrong see rule 1

67cheby 12-10-2012 12:29 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
LOL, good point !

67cheby 12-10-2012 02:10 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
1 Attachment(s)
Ok guys i just recieved the email that i have been exicted about !! So here is the big news, this will shock some of you but this build will be featuring a different suspension set up then what you expected to see coming ! I havent had a falling out with Nathan or anything like that , this is just a chance for me to be involved with another great company also building a great frontend, that is intrested in being a part of what i am doing ! I would like to say a HUGE THANK YOU to Jeff and Justin from Scott's Hotrods & Customs ! Me and my wife are very appreciative of your support on this build , without you this build would in no way be progressing at this pace !! So here is what we have coming our way Square Peg will be laying on the pavement the Scott's 73-87 Bolt in IFS with Torsion sway bar in the front / SLam Specialties Bags/ Scott's tubular adjustable upper and lower control arms / Ridetech shocks . Scott's adjustable transmission crossmember and Scott's SuperSlam 4 bar rear suspension.....SO STAY TUNED things are fixing to really start POPPING ! Thank you again Scott's HotRods ! NOW LETS GET THIS BLAZER ON THE GROUND !

68Timber 12-10-2012 02:16 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
If you didn't have everyone's attention, I'm sure you have it now. Looking forward to seeing what Scott's shop put together.

mrhino 12-10-2012 02:19 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
nice setup

es67chevy 12-10-2012 02:19 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Congrats, Mike and Sarah, on the awesome sponsorship! Way to step up, Scott's!!! Definitely a top rate company.


All times are GMT -4. The time now is 12:27 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com