Re: 1954 3100 C4 Tube Chassis Build
Hey Josh. Get anything done today? Empty mail box at my house. No call either. Just an FYI. Might wanna find the tracking number.
Talk to ya! Sid |
Re: 1954 3100 C4 Tube Chassis Build
2 Attachment(s)
Slight progress tonight. Made the crossmember to stiffen the chassis and mount the batwing to. Hope to be a roller tomorrow!
|
Re: 1954 3100 C4 Tube Chassis Build
Awesome work
|
Re: 1954 3100 C4 Tube Chassis Build
Sure as heck is awesome work, very nice!
Brian |
Re: 1954 3100 C4 Tube Chassis Build
it rolls! Pictures tonight
|
Re: 1954 3100 C4 Tube Chassis Build
Right on Josh!
|
Re: 1954 3100 C4 Tube Chassis Build
All right, waiting...Jim
|
Re: 1954 3100 C4 Tube Chassis Build
It rolls but pics won't load for me. I'll try again tomorrow. Thanks Matt (chev3600)
|
Re: 1954 3100 C4 Tube Chassis Build
2 Attachment(s)
Here are a couple. Shows crossmember with the batwing finally bolted to something! :lol: And the ride height pretty much spot on now.
|
Re: 1954 3100 C4 Tube Chassis Build
Nice. Couple more brackets and mounts and it'll be a "driver"!
|
Re: 1954 3100 C4 Tube Chassis Build
Thanks Matt, I got the bigger sleeves pressed into the batwing bushings today to accept the 5/8 bolts. Everything is nice and tight now. Slowly but surely.
|
Re: 1954 3100 C4 Tube Chassis Build
Looks great, love the look of those wheels
|
Re: 1954 3100 C4 Tube Chassis Build
Thanks man. I appreciate the comments.
|
Re: 1954 3100 C4 Tube Chassis Build
frame is looking good. never been a fan of frame swaps, but always been a fan of custom frames :D
custom **** is always cool |
Re: 1954 3100 C4 Tube Chassis Build
any progress man?
|
Re: 1954 3100 C4 Tube Chassis Build
Not this week so far. Been rocking at work, hockey and baseball with my little man, etc. Probably this weekend for sure. will be starting a 5 window conversion soon as well!
|
Re: 1954 3100 C4 Tube Chassis Build
5 window conversion? Do tell.....Raking in the gold eh! I'm off to a three day hockey tournament tomorrow morning in Toronto (coach) so I won't be able to touch my truck till next Wednesday at the earliest. Both boys have hockey Monday and Tuesday night. I expect an update when I get back!
|
Re: 1954 3100 C4 Tube Chassis Build
Ill do my best not to disappoint. Hope to have the 5 window stuff here soon and I will get lots of pics for everyone!
|
Re: 1954 3100 C4 Tube Chassis Build
STOCKISH, looks great. I can not wait for the 5 window swap.
Shannon |
Re: 1954 3100 C4 Tube Chassis Build
Awesome build! Be sure to drive it down to Charleston when you are done!!
|
Re: 1954 3100 C4 Tube Chassis Build
Thanks man, Id love to go back to Charleston sometime, would be a fun road trip.
|
Re: 1954 3100 C4 Tube Chassis Build
Hey Josh. Got to thinking about the long lower control arm bolt. I know you said that it's 1/2" diam. 18" long and threaded 2" on each end. Did you use anything special for that rod?
|
Re: 1954 3100 C4 Tube Chassis Build
I believe its driveshaft steel they use for large electric motor driveshafts. Its like grade 10.9 or something crazy. Hows your progress coming along? You know, you need a build thread buddy!
|
Re: 1954 3100 C4 Tube Chassis Build
Was hoping for some progress last night but to no avail. Sometimes I think I should have just thrown a solid axle and leaf springs under this thing....
On a positive note, I ordered a C4 torque arm so I can get the rear end and trans tied together. Cool that it negates the need for a transmission crossmember. I just need to get the 4 trailing arms mounted so I can be done with the rear of the truck finally. Just need to find exactly where my wheelbase needs to be to center the rear tires in the fenders, my rear fender is so beat up I don't trust it to mock up and determine the final wheelbase. |
Re: 1954 3100 C4 Tube Chassis Build
Do you have another fender and moch up for the other side? I don't think you could go wrong with a 117-117.9 WB. s10 swaps are 117.9 and most of them look good. anything is better than the 116 stock.
|
Re: 1954 3100 C4 Tube Chassis Build
I don't have the other side fender. I'll pick up a good one and go from there. Seems like 117-118 is pretty common though. Just want to be certain .
|
Re: 1954 3100 C4 Tube Chassis Build
Quote:
Quote:
X2....excellent build. If you drive it down to Charleston, strap the 292 in the back. I want one! |
Re: 1954 3100 C4 Tube Chassis Build
Already sold it. You should have come to get it.
|
Re: 1954 3100 C4 Tube Chassis Build
Quote:
|
Re: 1954 3100 C4 Tube Chassis Build
3 Attachment(s)
Ok guys, I think I have this figured out. My wheelbase is actually going to be 116". The reason is this. I wanted to push my bed a bit closer to the cab to take up some of the gap that was there. I also think I could have moved my front wheel a little further forward than I did, but at the end of the day I think it will be ok. Still looks bad ass to me and if need be I can change the front wheel openings enough to make it perfect. What do you fellas think?
|
Re: 1954 3100 C4 Tube Chassis Build
The rear is spot on. If it was me I would have pushed the front forward a little more.
|
Re: 1954 3100 C4 Tube Chassis Build
Yeah, I will have to look into changing the wheel opening a bit, it looks worse because of that angle as well. I will get a better pic straight on to see what everyone thinks.
|
Re: 1954 3100 C4 Tube Chassis Build
Ok, after posting my last response I came back out to the garage to get a better picture. I looked and realized I did not have any of the alignment shims in between the control arm and the control arm mount. I put the shims back in it that were originally in the Corvette suspension when I bought it. This is how the wheel looks now. Looks perfectly centered in the wheel well as best as I can tell. Pics in a few.
|
Re: 1954 3100 C4 Tube Chassis Build
What I'm wondering is how you moved the bed forward and still have the same length running board? Something would have to give aka be pushing or flexing on your fenders. Do you have enough bolts in them fenders too? They have room to play up or down and the rear has play forward to back. It looks like your front fender is a tad bit high which will make that gap look off too.
IF you really wanted, you could move your bed forward say 1". Move your cab back about 1" or say .75 on each. That way your front fender moves back and centers up in the well better, if that is the real problem there and not just an illusion or whatever pics do. Then your rear fender would relocate on the bed, thus needing different bed mounting holes (some guys do this) I've thought about doing it. Anyway, then you can keep stock running board, splash filler pan. Then just move your rear to where you want it. Lotta options really. its also nice to have engine in there to help see where things will fall with it. i don't think you'll have any issues really and if you did you could recess firewall or a few other things. |
Re: 1954 3100 C4 Tube Chassis Build
3 Attachment(s)
[QUOTE=99 to Life;6632583]What I'm wondering is how you moved the bed forward and still have the same length running board? Something would have to give aka be pushing or flexing on your fenders. Do you have enough bolts in them fenders too? They have room to play up or down and the rear has play forward to back. It looks like your front fender is a tad bit high which will make that gap look off too.
Then your rear fender would relocate on the bed, thus needing different bed mounting holes (some guys do this) I've thought about doing it. Anyway, then you can keep stock running board, splash filler pan. Then just move your rear to where you want it. QUOTE] This is what I did, I slid the bed forward but slid the fender rearward on the bed side. Still looks proportionate and gave me the smaller gap between the bad and cab that I wanted. The front fender is mounted to the cab in the factory location, the wheel was back in the wheelwell because the shims for the caster and camber adjustment werent in there. When I put the shims back in the wheel is perfectly centered front and rear now. Phew!! I knew I had centered the wheels perfectly before, I was getting worried for a minute trying to figure out what I screwed up. Pay attention to the basics! :lol: |
Re: 1954 3100 C4 Tube Chassis Build
Winner, winner!
|
Re: 1954 3100 C4 Tube Chassis Build
And we have a winner! That looks spot on to me.
|
Re: 1954 3100 C4 Tube Chassis Build
Let's make it four for four, winner....Jim
|
Re: 1954 3100 C4 Tube Chassis Build
Awesome work Josh! Please tell me you're keeping this one...for a while at least.:)
|
Re: 1954 3100 C4 Tube Chassis Build
[quote=STOCKISH;6632604]
Quote:
|
All times are GMT -4. The time now is 02:15 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com