Re: 61K10 build
 

Nice job on the dash.

Re: 61K10 build
 

Looking awesome! Keep up the great work!

Re: 61K10 build
 

here's a couple more pics of dash with components installed. the holes are for my CB mic holder, do you think i can find it lol!

Re: 61K10 build
 

Just need a glove box emblem to finish it off!!!! looks killer.

Re: 61K10 build
 

1963c-10--what emblem? my glove box door didn't have any.

Re: 61K10 build
 

Lookin good man Lookin good man...

Re: 61K10 build
 

man that is one sweet looking truck! old 4x4s are just so cool

Re: 61K10 build
 

thanks again guy's. still have the freeze plug leak after changing it. did not feel any problem on the block surface where the plug fits. maybe a pin hole in the block casting. it just weeps a little bit, a few drops while setting. does not change while running. got to get my interior painted and maybe the outside also.

Re: 61K10 build
 

Check out this thread...starting w/post 34
http://67-72chevytrucks.com/vboard/s...=425149&page=2

Was a 1960 and maybe a 61 option, but will work on any 60-63 as the glove box doors are the same.

Picture is from 1960 Chevy literature. I can check this week and see if I have any more left. I had a couple a while back, know I sold 2 in the forums, but I know there were 1-2 somewhere else in the parts room.

Re: 61K10 build
 

i did some research and it might be a 1960 only.

Re: 61K10 build
 

Dash & gauge cluster looks good!

PS: Any of them wildfires in Southern Cali anywhere near you?

Re: 61K10 build
 

Hay Mitch--wondered where you were. No fires here. I am up north between Sacramento and Lake Tahoe. I still have fresh air lol. had to temp the dash stuff so i could post something.

did you ever start a build?

Re: 61K10 build
 

That's good to hear, way the news is telling it, the whole state is blazing. lol I've just been hunting and peckin for parts (ie doors & assembly) bought two but not sure they are better than what I already have. We'll see come Sunday, time to start blasting.

Re: 61K10 build
 

Got the interior painted yesterday and the bed liner sprayed on the floor and behind the gas tank. still has some little dents and imperfections that i can live with and of course orange peel. going to try to paint the outside of cab today. hope it's not windy---------

Mitch---good luck with your doors--

Re: 61K10 build
 

WOW! Hope mine will come out half as nice! :metal:

Re: 61K10 build
 

I am sure it will TJ----you have plenty of time---

Re: 61K10 build
 

Subscribed.

Re: 61K10 build
 

well Guy's it's PAINTED!!! only a few bugs and the normal dirt as i painted out in the open air. would not fit in my paint booth (screened tent) on the trailer, so outside it was.

Re: 61K10 build
 

I know your glad to get that much more done, Now it's just assembly time. This get's me motivated to work on mine.... Looks Great...

Re: 61K10 build
 

Now that's BLING! My kind anyways. Super job!

Now for the questions for the green horn (me).

Any super duper info advice on the painting technique? Like color / brand of primer.

And what's that mounting hole in the cab / passenger side for? CB antenna?

Re: 61K10 build
 

Randy--A little more time in color sanding and buffing (to get the bugs and orange peel) out before putting all back together.

Mitch--(have somebody else do it) Painting technique lol! Right, as if i know what I'm doing. had a problem with my gun on the 2nd coat. probably caused more orange peel. (you really need a booth) at least it will help. all my paint came from TCP Global out of sand diego ca. probably buy the same stuff from summit racing. I used single stage but the experts say for a beginner to use base coat/clear coat. It's easier to fix your screw ups on the base then clear everything. a lot of info in the paint/body section.

yes the hole is for a Cb ant mount.

trying to get a windshield lined up with a local shop.

Re: 61K10 build
 

front grill support had to go in because of the bumper. the radiator support has to be pushed back as far as it will go for the grill support to slip under the bumper. bumper is welded on.

a little color sanding and buffing----------and yes there is still dents lol. If i had to do this tk again i would of bought a rust and dent free tk and used the body parts on the 4x4 frame. this tk was beat to hell.

Re: 61K10 build
 

Lookin Good Man. I remember seeing it b4 you started on it 1,000% Improvement In my
Book.....

Re: 61K10 build
 

Really looking nice bud! :chevy:

Re: 61K10 build
 

Thanks Randy. it's not anywhere perfect (show quality) and if i go to a show, the purest know it all will pick it apart. been through the car-show thing, had this Nomad for 24 yrs and i even drove and parked it just about anywhere.

thanks to you TJ. I am like you, i won't be afraid to hall or put something in the back. have a bunch of chainsaws that i restored, and might build a rack to display them in the bed. need a new tool box also and maybe a headache rack. this is a 60's-70's tk not a 2014.

Re: 61K10 build
 

Excellent progress.....it is looking sharp!!

Re: 61K10 build
 

DOn't feel too bad, I'm pretty sure those don't actually exist. :)

Paint looks awesome, by the way. That is the same color I'll be doing mine in some day, maybe, I hope!

Re: 61K10 build
 

"beat to hell!" Yeah, but look at her now, that thing will last another 50 yrs, and look good doing it too! Really liking that front bumper too. Your cruising right along now.

Re: 61K10 build
 

thanks again guy's---taking the cab on the trailer to the glass shop on tues to get the windshield installed and back glass. was going to do it myself but only have 2 hands, you need at least 3 lol.

Re: 61K10 build
 

Glass is in! looks good, fit and seal. the seal/gasket was precision. A local shop got the tented windshield and did the work. Breaker Glass in placerville ca. (great name for a glass co.)

Re: 61K10 build
 

Very nice...another step closer to the finish line

Re: 61K10 build
 

Drool drool drool...

Re: 61K10 build
 

The cab is on the frame!!! now comes the fun part i hope lol.

Re: 61K10 build
 

Sweet sweet sweet sweet sweet, did i say sweet........

Re: 61K10 build
 

Kimble, I'm curious as to why you painted the back of the cab black?

Re: 61K10 build
 

WOW!!!! I think its starting to look like a truck again!!!! :metal::metal::metal:

Re: 61K10 build
 

Nice!

Re: 61K10 build
 

Jason---the black is bed liner not paint. the cab was full of rust rockers etc. the back of the cab had a few small holes (rust pits). after blasting we had holes. used all metal filler as the rust was gone, and then epoxy/2k/urethane then bed liner. I really needed a replacement cab. bed liner is inside the cab behind the gas tank and the floor also. It should out live me lol.

TJ--yes i agree

thanks Mitch--Randy---the future of your tks----------Kimble

Re: 61K10 build
 

got a few more things done. wiring almost all back in. (new headlights) pedals in--firewall pad in. (wish you could buy one without all the cutouts) they weren't rubber org right? don't know what i will put on the floor. might just shoot another coat of bed liner and some mats.

found this under my seat padding lol. they did leave 2 little strips of org seat material (custom comfort op.) just going to be gray vinyl to match the visors.

need to bleed the brakes and clutch

Re: 61K10 build
 

Nice! I'm excited for when I get my wiring kit..lol..New electrical always inspires more confidence. :chevy: