Re: High School Project Build II
 

Getting in some strange positions to get shocks off

Re: High School Project Build II
 

We are going to cut our frame - cause the short bed frame I found was junk

Re: High School Project Build II
 

Having fun getting the rivets out

Re: High School Project Build II
 

With what I've seen in these last two builds that shouldn't be an issue keep up the great work (teaching) :metal::metal::metal:

Re: High School Project Build II
 

A good air chisel is a whole lot faster....:D

Re: High School Project Build II
 

That Is what we are using - either cutting a cross first or just torching one end off first

Re: High School Project Build II
 

With a good air chisel and a sharp chisel bit, you can pop the heads off. Then switch to a punch bit and punch out the rest of the rivet by pushing it out. So much faster than cutting 2 lines in it IMO. Just becareful when those heads come off as they like to go flying! :mm:

Re: High School Project Build II
 

She is apart

Re: High School Project Build II
 

Stitching it up

Re: High School Project Build II
 

Putting cab mounts back on

Re: High School Project Build II
 

Putting in c-notch

Re: High School Project Build II
 

Are you going to use a fishplate or box the frame where you cut the frame?

Re: High School Project Build II
 

Welding them in

Re: High School Project Build II
 

Tucking

Re: High School Project Build II
 

Going to use old frame section on inside of frame

Re: High School Project Build II
 

Now a few days of cleaning

Re: High School Project Build II
 

looking good wish my shop teacher was in to 6772 trucks . he was great but a vw bug guy .the good old days .... great job keep up good work .:chevy:

Re: High School Project Build II
 

Work in progress

Re: High School Project Build II
 

Hard at it

Re: High School Project Build II
 

Getting close

Re: High School Project Build II
 

Coming along fast.

Re: High School Project Build II
 

Monday morning

Re: High School Project Build II
 

Welding in old frame section

Re: High School Project Build II
 

Frame party

Re: High School Project Build II
 

Wow moving along quickly. Wish I had a small army to tackle the frame setting in my garage. :lol:

Re: High School Project Build II
 

After we welded the frame together - we cut down the old frame section that we removed and welded it to inside
Not bad for 16 yr old with a bad eye

Re: High School Project Build II
 

Nice work! He sure can weld!

Re: High School Project Build II
 

It looks great..I hope the "bad eye" was a joke. He's too young to have problems like that. I can't believe the speed of the progress on this project. Keep up the great teaching...:metal:

Re: High School Project Build II
 

Putting the finishing touches on frame. We hope to paint it tuesday

Re: High School Project Build II
 

Bought our drop spindles an springs

Re: High School Project Build II
 

Brake puzzle

Re: High School Project Build II
 

Turning rear drums

Re: High School Project Build II
 

Anybody have any TBSSb or late model Camaro manifolds?

Re: High School Project Build II
 

Painted frame and rear end

Re: High School Project Build II
 

It's looking very good .

Re: High School Project Build II
 

Look at this - Boyd Tanks donated us this sweet tank and pump setup. Thanks Dave- 2 years in a row

Re: High School Project Build II
 

Getting the rotors and calipers on

Re: High School Project Build II
 

That is awesome of Boyd for sure!

Re: High School Project Build II
 

It will be a roller before long.

Re: High School Project Build II
 

Entropy Radiator donated this beauty. This is one of the best looking radiators that I have seen - great craftsmanship.