Re: 67-72 cross members
 

Any upper rear crossmember (4x4) ?
Also upper shock mounts? (4x4)

Just curious about a front spring hanger thats cast for 67-68 4x4?

Thanks !!

Re: 67-72 cross members
 

Sorry I don't have that one. Actually I have never had a 292 4x4 truck.
Yes on the crossmember and shock mounts. Don't have the front hangers. 100.00 for the crossmember and 45.00 for the pair of shock mounts, plus shipping. Both cut off and ready. Send zip for shipping cost if interested.

Thanks, Tom

Re: 67-72 cross members
 

37129. Probably just crossmember. Thx

Re: 67-72 cross members
 

Shipping is 29.00 via UPS. Thanks, Tom

Re: 67-72 cross members
 

Tom,
Looking for several frame members for a 1971 V8 short base coil frame.
Looking for paypal quote with shipping to 45431:

1. All Four Cab Mounts (2 front and 2 Rear)
2. Rear Cross member (with hole for electrical Harness)
3. Upper Spring Pads/Mounts (L&R)
4. Brackets that attaches engine Cradle to Frame (L&R) see picture

My engine cradle also has some pinholing, not major but would be curious what one would cost to ship.

Thanks
-Bob

http://i53.photobucket.com/albums/g7...psgxaeqrev.jpg

Re: 67-72 cross members
 

Hi Tom,

I am wondering if you happen to have, or will have, a couple of frame sections. I need a section a couple of feet on either side of the rear spring perches. For both the left and right frame rails. The truck is a 71 C10 (2wd). Also the top spring mounts if you have a set.

Thanks!

Re: 67-72 cross members
 

Looking for the rear most crossmember for a 71' 4x4 swb, shipped to 96150.

Re: 67-72 cross members
 

looking for the engine stands for a 4x4 k10 with a v8. the short pieces that go from top of frame to crossmember. My frame is missing them. Thanks

Re: 67-72 cross members
 

Looking for 4x4 engine cross member, and engine stands SBC.
Also Front Spring hanger 4x4

30707

Thank you Sir.

Jay

Re: 67-72 cross members
 

Would you happen to have the cross sills for a wood bed swb 1967 c10? Need all of them even the rear cross sill.

Re: 67-72 cross members
 

Not sure Tom is on the board anymore...he hasn't replied to any posts and any of my PMs from several weeks. Hope he is OK.
-Bob

Re: 67-72 cross members
 

Looking for a 1972 th350/th400 2wd trans crossmember and also do you have any upper and lower control arms for a 1967-1972 C10? thanks

Re: 67-72 cross members
 

Looking for a 67 rear crossmember, right before the bumper. It's a C-10 Short Stepside. Uprooting tree stumps with chain way back when, here's what it looks like: http://67-72chevytrucks.com/vboard/s...d.php?t=711020 AND I can drive down and pickup. Thanks mucho.

Re: 67-72 cross members
 

I'm looking for the very rear cross member (has hole for tail light wiring harness) 2wd shipped to 36830. If you still have one, please send total and paypal info.

Thanks.

Re: 67-72 cross members
 

Im looking for front small block engine crossmember and engine brackets for 1968 K10 chevy pickup shipped to murrysville Pa any help would be appreciated. This is the first time posting on this site so please bear with me. Thanks Rich

Re: 67-72 cross members
 

Sorry 68 K10 engine crossmember and engine brackets for smallblock chevy shipped to 15668. Thanks Rich

Re: 67-72 cross members
 

Have you had any luck with this one?

Re: 67-72 cross members
 

Oregon 67, no havent had any luck, im kind of in a bind need to get motor back in my kids truck. Sorry

Re: 67-72 cross members
 

looking for small block 350 engine crossmember and engine brakets for 71 GMC K15. Shipping to 83646.

Thanks
18Z

Re: 67-72 cross members
 

Do you have upper rear shock mounts for a 68 4x4?

Re: 67-72 cross members
 

Sorry i have nothing for sale, was looking for a crossmember and sourced one from a local board member

Re: 67-72 cross members
 

The OP has not logged on to this site since May...

Re: 67-72 cross members
 

Tom the OP says very busy with his business right now and is generally active on the board in the early part of the year. You can google DLTruck and call his parts department if you need something and they will work with you to get what you need. If you are in a hurry then you may want to try other alternatives. I personally have found them to be helpful.

Re: 67-72 cross members
 

Would you have a complete set of rails to change a SWB from steel floor to a wooden floor?

Thanks
Eddie

Re: 67-72 cross members
 

do you have one?

very rear cross member (has hole for tail light wiring harness) 4x4

thank you

-rex

Re: 67-72 cross members
 

I need the 4x4 cross member that mounts to the top and bottom of the frame rails for a 1972 blazer and the transfer case skid plate if you have one. The blazer has a 205 with an automatic. shipped to 85086. Thanks.

Re: 67-72 cross members
 

Didn't get a response.. lmk thank you

Re: 67-72 cross members
 

I have a 1968 K10 with A/T. Do you have a xmember for the rockwell transfer case.

Re: 67-72 cross members
 

Hello I'm looking for a rear crossmember to mount shocks on a 69 C10 short bed I have leaf springs and converting to railing arms shipped to 85037 thanks

Re: 67-72 cross members
 

fyi

Stock 1972 gmc jimmy 4wd suspension
 

I have a 1972 gmc jimmy 4wd. I am trying to find stock 1/2 ton leaf springs, leaf spring hangers, and shackles for the front and rear. Do u have any? Shipping would be to 02631 thanks

Re: 67-72 cross members
 

I need a rear cross member for my 67 C10 short step.

Attachment 1648542

Re: 67-72 cross members
 

Have a 4x4 frame and axles. Tried to send you a private message but cant.

Re: 67-72 cross members
 

Any clean 2wd 3-4spd manual x members out left? Thanks

Re: 67-72 cross members
 

He hasn't been on here since 5-24-16 !

Re: 67-72 cross members
 

I called them directly:

D & L Truck Parts
www.dltruckparts.com
91720 Highway 99 S, Junction City, OR 97448
(800) 231-2603

Any update?
Posted via Mobile Device

Re: 67-72 cross members
 

They have them in stock. I ended up straightening mine.

Re: 67-72 cross members
 

Quote:
Originally Posted by Krex View Post
do you have one?

very rear cross member (has hole for tail light wiring harness) 4x4

thank you

-rex
Didn't get a response.. lmk thank you

Are you saying you have the cross member in stock? Also, would you happen to have the rear horns basically from the rear leaf spring mounts back for a 4x4?

Re: 67-72 cross members
 

Looking for a set (left and right) of the rear upper shock mounts from a leaf spring/4X4 truck. Mounts are inside of the frame rails, 3 rivets holding to frame.

Thanks