The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 5 of 8

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)

- - MD Parting 72 burb (https://67-72chevytrucks.com/vboard/showthread.php?t=751286)

richard2717

04-23-2018 06:41 AM

Re: Parting 72 burb

Quote:

Originally Posted by WannaBe68 (Post 8244672)

Hey thanks for the note - are these something you get in regularly or once in a blue moon?
Thanks again

It is one of them deals that I may not have something this morning but never know what will fall in place this afternoon. LOL just never know anymore

WannaBe68

04-23-2018 07:10 AM

Re: Parting 72 burb

I hear ya'...
If you do find a decent set please keep me in mind!

ajgriffin

05-03-2018 03:16 PM

Re: Parting 72 burb

Quote:

Originally Posted by richard2717 (Post 8151549)

I have sent the stands off to be rechromed and I have been working on buffing out the rest of the pcs. I am going to wait to see what the stand turn out like before deciding. The other pcs are buffing up really nice. I have a panel truck and 2 blazer projects that I was thinking of using it on one of them, but still up in the air at this point.

Richard

What's the verdict on the roof rack? Is it going to make it onto one of the projects or is it available?

richard2717

05-03-2018 03:21 PM

Re: Parting 72 burb

Quote:

Originally Posted by ajgriffin (Post 8253695)

What's the verdict on the roof rack? Is it going to make it onto one of the projects or is it available?

It has already been sold to another member here.

Richard

richard2717

05-20-2018 09:21 AM

Re: Parting 72 burb

Ttt

carryall

05-27-2018 09:56 PM

Re: Parting 72 burb

Quote:

Originally Posted by richard2717 (Post 8220406)

Dwayne
Here is what I have.

two good but not perfect 3rd door sills. One I cleaned up a bit with 0000 wool the other one should do the same

I have the filler neck out of the white sub but gotta figure out a way to get rest of locking cap off without a key

Attachment 1767060

I have this area from the same green suburban I can cut out

Attachment 1767059

Or

I have an auxillary gas setup from a parts truck. Same deal here I don't think i have key for the gas cap.

Attachment 1767061

Attachment 1767062

or

I have a 72 Blazer filler that I "might" part with. Not sure if I still have the rear cover, I can't seem to put my fingers on it at the moment. I need to make sure the one in one of my other projects is good b4 I let it go though.

Attachment 1767063

I would need to get them removed to make sure they are decent all the way around. Let me know which one would work better for you.

Do you have the area around the gas filler? I néed a square if possible

T0ple55

05-28-2018 02:35 AM

Re: Parting 72 burb

Looking for a front passenger side bottom half a pillar complete with door mounting plates. Thanks

richard2717

05-28-2018 07:36 AM

Re: Parting 72 burb

3 Attachment(s)

Quote:

Originally Posted by carryall (Post 8269724)

Do you have the area around the gas filler? I néed a square if possible

I have already sold that one but I do still have this cut out available. $30 plus shipping and can cut it down based on what you need.

.

richard2717

05-28-2018 07:39 AM

Re: Parting 72 burb

2 Attachment(s)

Quote:

Originally Posted by T0ple55 (Post 8269854)

Looking for a front passenger side bottom half a pillar complete with door mounting plates. Thanks

I have this one. It appears in good shape but I won't fully know until I pull the fender. How high up do you need it? I will try to remove fender today depending on weather. We have had boat loads of rain overnight and still happening on and off this morning.

.

carryall

05-28-2018 10:17 AM

Re: Parting 72 burb

Quote:

Originally Posted by richard2717 (Post 8269879)

I have already sold that one but I do still have this cut out available. $30 plus shipping and can cut it down based on what you need.

.

How much would shipping be to 26704

T0ple55

05-28-2018 11:16 AM

Re: Parting 72 burb

About exactly half should work just fine. Thanks again!

richard2717

05-28-2018 12:11 PM

Re: Parting 72 burb

1 Attachment(s)

Quote:

Originally Posted by carryall (Post 8269989)

How much would shipping be to 26704

If I cut it at the size I have boxed in in red it would be $18 shipping That is roughly a 12'' square. PP is in my signature if you want it

Thanks
Richard

carryall

05-28-2018 12:15 PM

Re: Parting 72 burb

Quote:

Originally Posted by richard2717 (Post 8270059)

If I cut it at the size I have boxed in in red it would be $18 shipping That is roughly a 12'' square. PP is in my signature if you want it

Thanks
Richard

That will work. I'll take it.

carryall

05-28-2018 12:22 PM

Re: Parting 72 burb

Quote:

Originally Posted by richard2717 (Post 8270059)

If I cut it at the size I have boxed in in red it would be $18 shipping That is roughly a 12'' square. PP is in my signature if you want it

Thanks
Richard

Just sent payment

richard2717

05-28-2018 12:36 PM

Re: Parting 72 burb

Quote:

Originally Posted by carryall (Post 8270071)

Just sent payment

Got your payment and will ship tomorrow

carryall

05-28-2018 12:38 PM

Re: Parting 72 burb

Quote:

Originally Posted by richard2717 (Post 8270082)

Got your payment and will ship tomorrow

Thanks

richard2717

05-28-2018 12:39 PM

Re: Parting 72 burb

1 Attachment(s)

Quote:

Originally Posted by T0ple55 (Post 8270024)

About exactly half should work just fine. Thanks again!

So like from here down? I am in holding pattern here for rain. Soon as it lets up some I will finish removing the fender so I can see it better

.

T0ple55

05-28-2018 11:35 PM

Re: Parting 72 burb

That will be perfect. Let me know how much your thinking

richard2717

05-29-2018 08:05 PM

Re: Parting 72 burb

1 Attachment(s)

Quote:

Originally Posted by T0ple55 (Post 8270507)

That will be perfect. Let me know how much your thinking

Per the pm I sent is this all you are needing (circled in red)?

.

T0ple55

05-29-2018 08:08 PM

Re: Parting 72 burb

Yes, that is exactly it, thanks a ton.

richard2717

05-29-2018 08:23 PM

Re: Parting 72 burb

Quote:

Originally Posted by T0ple55 (Post 8271042)

Yes, that is exactly it, thanks a ton.

Ok will pull some out in the morning and make sure they are good.

Richard

carryall

05-29-2018 08:59 PM

Re: Parting 72 burb

You wouldn't happen to have a radiator support for a 1967, inner fenders, and passenger side fender.

richard2717

05-29-2018 09:01 PM

Re: Parting 72 burb

Quote:

Originally Posted by carryall (Post 8271082)

You wouldn't happen to have a radiator support for a 1967, inner fenders, and passenger side fender.

I have a 67 parts truck but the sheet metal is not much to be desired

carryall

05-29-2018 09:03 PM

Re: Parting 72 burb

Ok I know the inner fenders can be from any year 67-72. Radiator support must be 67-68.

richard2717

05-29-2018 09:10 PM

Re: Parting 72 burb

I will take a look at it in the morning and get current pics

richard2717

05-30-2018 09:06 AM

Re: Parting 72 burb

2 Attachment(s)

Quote:

Originally Posted by T0ple55 (Post 8271042)

Yes, that is exactly it, thanks a ton.

Here is pics of what I have. ALready sent pm

.

richard2717

07-02-2018 12:29 PM

Re: Parting 72 burb

Still have quite a few parts

JMC3178

07-02-2018 01:02 PM

Re: Parting 72 burb

Do you happen to have any rear wheel wells? I'm looking for both driver and passenger sides. Shipped to 93636

richard2717

07-02-2018 01:22 PM

Re: Parting 72 burb

Quote:

Originally Posted by JMC3178 (Post 8292890)

Do you happen to have any rear wheel wells? I'm looking for both driver and passenger sides. Shipped to 93636

I have 3 sets and all have rust in the flanges.

You might check with

Budnickguy he is in CA
1968k20 Lisa is in CA
t korinek is in AZ
randy500 is in WA

They have Burb parts as well from time to time

Thanks
Richard

Number98

07-02-2018 09:48 PM

Re: Parting 72 burb

Quote:

Originally Posted by richard2717 (Post 8151549)

Anymore thought in the rack?

richard2717

07-03-2018 01:32 PM

Re: Parting 72 burb

Quote:

Originally Posted by Number98 (Post 8293164)

Anymore thought in the rack?

I listed it in a separate post some months back and it was sold.

Thanks
Richard

Burb	07-17-2018 05:21 PM

Re: Parting 72 burb

Richard ...

I am looking for a set of Suburban tail light and back up light buckets I did notice you selling a rear panel with some attached and was hoping you my have another set available.

Please let me know

richard2717

07-17-2018 05:30 PM

Re: Parting 72 burb

4 Attachment(s)

Quote:

Originally Posted by Burb (Post 8303099)

Are you talking about the metal inserts that go into the body panel or the body panel itself? I should have both

.

Burb	07-17-2018 05:43 PM

Re: Parting 72 burb

1 Attachment(s)

the metal inserts that go into the body panel ...

Burb	07-17-2018 05:51 PM

Re: Parting 72 burb

So... how much for sets 6 and 7?

richard2717

07-17-2018 08:13 PM

Re: Parting 72 burb

2 Attachment(s)

Quote:

Originally Posted by Burb (Post 8303114)

So... how much for sets 6 and 7?

$55 shipped with hardware $50 without
PP link is in my signature below if you want them
I can hit that little bit of surface rust in the blast cabinet b4 I send them out

Thanks
Richard

.

Burb	07-17-2018 09:19 PM

Re: Parting 72 burb

Payment sent

Thank you

richard2717

07-17-2018 09:21 PM

Re: Parting 72 burb

Quote:

Originally Posted by Burb (Post 8303246)

Payment sent

Thank you

Got it. They will ship tomorrow

Thanks Richard

cucvzuz

07-26-2018 09:31 PM

Re: Parting 72 burb

I'm looking for the chrome strip that sits under the driver's side rear quarter glass. Do you still have one

richard2717

07-26-2018 09:44 PM

Re: Parting 72 burb

Quote:

Originally Posted by cucvzuz (Post 8309637)

I'm looking for the chrome strip that sits under the driver's side rear quarter glass. Do you still have one

I should still have a couple if you are talking about the one on the inside that holds the interior panels. Will get some pics in the morning and post them

All times are GMT -4. The time now is 11:17 AM.

Page 5 of 8

Show 40 post(s) from this thread on one page