Re: My Dusty 71 GMCe Electruck
5 Attachment(s)
so then I called the Chevy C10 Non Tilt Manual Steering Column Installation Help Desk or the CCNTMSCIHD where the same kind fella answered and guided me through the entire installation process pointing out a bunch of cool factoids along the way
here are some of the doo dads Patrick had me mountenate |
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
the bottom bearing, spring, and washer
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
yes we are going with a Grant steering circle on this truck, and yes I own 7 different Grant Chevy truck specific mounting kits, and NO none of them fit this steering column
this is just for mock up anyway, and will have to come apart for spring cleaning and painting eventually |
Re: My Dusty 71 GMCe Electruck
I probably missed it..... I watched a couple of the videos... full highway speeds I am guessing? my other thought was get a tesla drive unit and go about it that way... so many ideas and so lil time it seems lol :D
Thanks Sean |
Re: My Dusty 71 GMCe Electruck
4 Attachment(s)
clocking the steering column was next, and Patrick left no stone unturned, pointing out things I didn't know existed
so first this rectangulizer points North and has the brake pedal bracket nipple go inside of it (I love these factory hints for assembly) |
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
yes I lost my lower firewall steering column bracket and had to buy a new one
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
the stick out was next, and Patrick pointed out more cool factory assembly guides, made me wanna go hug a GM engineer of yesterday
|
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
and just like that the new old steering column was in
|
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
he also pointed out a few other things, but I wasn't paying attention (I don't like people telling me what to do, especially when I call them for help)
|
Re: My Dusty 71 GMCe Electruck
So now I know it IS normal for the bell to spin a bit on these floor shift columns. Thanks for checking that for me. When it comes time to tear down this column, please let me know if there is a foam donut inside it down under that curved cover at the bottom end.
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
Quote:
|
Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
5 Attachment(s)
game on, say hello to my little friend, it sucks, and that's good!
|
Re: My Dusty 71 GMCe Electruck
4 Attachment(s)
I also swung by Grainger [pronounced: "opposite of Harbor Freight"] and picked up another window for my media blasting cabinet, and oh my god, you can actually see inside that thing, who knew?
so then I went to town blasting everything in sight, no matter how big or small, though I have no idea what I'm going to do with these fender bolts now that they are naked? any ideas / suggestions |
Re: My Dusty 71 GMCe Electruck
5 Attachment(s)
remember this drive shaft bracket
|
Re: My Dusty 71 GMCe Electruck
reserved for pics of powder coated bracket
|
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
nothing to see here folks, just drive shaft #5
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
media blasted its center support bracket plate thingie
|
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
I also decided to spreadarize it as it's easier to shorten a drive shaft than to lengthen it, and this will allow me to measurize it more easier and better (we think)
|
Re: My Dusty 71 GMCe Electruck
5 Attachment(s)
this update brought to you by Rock Auto
|
Re: My Dusty 71 GMCe Electruck
4 Attachment(s)
and AMAZON ... keeping landfills full of cardboard boxes since 1994
|
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
big day today, hope to accomplish quite a bit, install brand new steering linkage, and get the radiator core support and inner fenders back on, among 7 million other little things, you know how it goes...
|
Re: My Dusty 71 GMCe Electruck
4 Attachment(s)
so with a help of a friend got the steering linkage on, the inner fender, and the radiator core support
|
Re: My Dusty 71 GMCe Electruck
4 Attachment(s)
then we took on the Prius power assist steering and decided to graft it into the GM intermediate steering shaft
|
Re: My Dusty 71 GMCe Electruck
4 Attachment(s)
this is the side that will connect to the GM manual steering box using the stock rag joint
|
All times are GMT -4. The time now is 06:53 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com