The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 50 of 104

« First

100

Last »

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- 67-72 Chevrolet & GMC Pickups Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=115)

- - 1967 C10 Custom Big Window (https://67-72chevytrucks.com/vboard/showthread.php?t=335650)

Slick67

03-14-2011 12:05 PM

Re: 1967 C10 Custom Big Window

Quote:

Originally Posted by propanemudtruck (Post 4551299)

Good News, I hope! Any news since the no-show?

I have heard from other people that this is an area that can be welded easily since there is no pressure in this area. But no new news from the builder. I called twice Saturday with no answer, but they are not open to the public on weekends so it's a hit or miss. I am calling him today but we have bad weather so I don't see anything happenin.

propanemudtruck

03-14-2011 01:00 PM

Re: 1967 C10 Custom Big Window

If things don't work out, I bet drilling out the end of the crack to prevent spreading (always recommended) and a braze job and you'd be good to go! Wonder where the end of the crack is under the timing cover and how the plug would work short of pigg puddy or similar...

Slick67

03-14-2011 01:07 PM

Re: 1967 C10 Custom Big Window

Quote:

Originally Posted by propanemudtruck (Post 4551760)

Wish I had more knowledge on the plug he talked about. Can't even take anything off of the engine till he gets the chance to look at it. Stalemate. I agree with ya, drill it, weld it, drive it.

Slick67

03-14-2011 03:38 PM

Re: 1967 C10 Custom Big Window

For anyone interested in this "plug" here is a website that explains the process and it may be an option for some of us.
http://www.locknstitch.com/Metal_Stitching.htman

chevy2racr

03-14-2011 04:59 PM

Re: 1967 C10 Custom Big Window

get rid of the "an" at the end of the address

Slick67

03-14-2011 07:08 PM

Re: 1967 C10 Custom Big Window

Quote:

Originally Posted by chevy2racr (Post 4552273)

get rid of the "an" at the end of the address

Opps sorry.

http://www.locknstitch.com/Metal_Stitching.htm

Slick67

03-15-2011 06:05 PM

Re: 1967 C10 Custom Big Window

1 Attachment(s)

Well he came by yesterday evening, I wasn't there but did talk to him this morning. A new block is the only answer so he is going to be lookin for a 327 1966 or older like what I have. Now we gotta see how long it's gonna take him. Started tearing my engine down today and got a little done.
Attachment 714457

butternut1972

03-15-2011 09:36 PM

Re: 1967 C10 Custom Big Window

That's a bummer. I know I live a few hours from ya, but I have a friend that owns a machine shop so I will put out the word if you can't find what your looking for. There's lots of car guy's up here and I'm sure he could find one of the year you want.

Drummerboy

03-15-2011 09:37 PM

Re: 1967 C10 Custom Big Window

Looking good!http://67-72chevytrucks.com/vboard/s...d.php?t=209788

Slick67

03-16-2011 12:24 AM

Re: 1967 C10 Custom Big Window

Quote:

Originally Posted by butternut1972 (Post 4555348)

Thanks butternut. I am going to see how long he "looks" for the 327. If it is taking longer than expected then I will be in the market for one. I'm keepin you in mind on this and will PM ya when/if that time comes. Hope he gets off his butt and puts forth some effort. My friends dad has a 350 long that he will sell to me for $100, but that would be a last resort.

Quote:

Originally Posted by Drummerboy (Post 4555358)

Looking good!http://67-72chevytrucks.com/vboard/s...d.php?t=209788

Thanks Drummerboy!

Jeffs70

03-16-2011 02:47 AM

Re: 1967 C10 Custom Big Window

hey slick sorry to hear the only last resort is a block. Hope the guy comes through for you too and helps you out.

propanemudtruck

03-16-2011 12:34 PM

Re: 1967 C10 Custom Big Window

Quote:

Originally Posted by Jeffs70 (Post 4556091)

hey slick sorry to hear the only last resort is a block. Hope the guy comes through for you too and helps you out.

x2 ;)

Slick67

03-16-2011 05:53 PM

Re: 1967 C10 Custom Big Window

Quote:

Originally Posted by Jeffs70 (Post 4556091)

hey slick sorry to hear the only last resort is a block. Hope the guy comes through for you too and helps you out.

Quote:

Originally Posted by propanemudtruck (Post 4556665)

x2 ;)

Thanks guys. I should know something next week, should have the engine out Tuesday or Wednesday to take to the shop.

6772owner

03-16-2011 06:22 PM

Re: 1967 C10 Custom Big Window

Good luck Slick, I hope you get the engine put back together soon... Beautiful truck and attention to detail! Definetly jealous! :metal:

77chris03

03-16-2011 08:44 PM

Re: 1967 C10 Custom Big Window

i got a friend that has a 327....i could call to see if he still has it....if i remember it didnt have the neck in the front...but not sure of the year...btw....you should see some of the new parts i got........

Slick67

03-17-2011 12:29 AM

Re: 1967 C10 Custom Big Window

Quote:

Originally Posted by 6772owner (Post 4557264)

Good luck Slick, I hope you get the engine put back together soon... Beautiful truck and attention to detail! Definetly jealous! :metal:

I appreciate the jealousy!! :lol: It will get done one day, it's all up to the engine builder now and I'm just along for the ride.

Quote:

Originally Posted by 77chris03 (Post 4557601)

Let's see what the builder does. If he starts sittin on his laurels and wastin time finding a block I would be interested. The oil tube in the front is just the type of manifold I have (old school) so it would probably work. Keepin my fingers crossed that an old one pops up. We are heading to San Antonio in the morning and should be gettin back Saturday evening, but would like to catch up with ya. May get up to your neck of the woods one weekend soon to see your new stuff and your project!

nuke1

03-17-2011 01:51 AM

Re: 1967 C10 Custom Big Window

Uh, I hate to say this to you, But I have a few of them up here, if you were closer, you could just have it. no charge bud. Sorry for the inconvience. guess it is still gonna be a race who gets theirs done first. Oh well, just a few pops owing one way or the other any way. Just make sure not to scratch MY paint on that truck that you are tearing the engine down on EH!!!! LOL. I get first dibbs if ya sell her. Then at least I will have one finished truck. Kiddin bud, All will work out in the end!!

Slick67

03-20-2011 12:29 PM

Re: 1967 C10 Custom Big Window

Quote:

Originally Posted by nuke1 (Post 4558372)

HAHAHHA!! I'll do my best not to scratch YOUR truck! I really appreciate the offer on the block, too bad it's a little far. Going to finish pulling the engine tomorrow or Tuesday, then we'll see how fast I get another.

Slick67

03-24-2011 05:19 PM

Re: 1967 C10 Custom Big Window

Have not got the engine all the way out because I do not have an engine waiting for the transplant. The engine builder told me yesterday that he has located (2) 327's and was going to look at them both then decide which one was best. So maybe he is actually trying! I'll have the engine out this weekend with some pics.

6772owner

03-24-2011 05:22 PM

Re: 1967 C10 Custom Big Window

Great news to hear, I would really like to see this truck back together and you out enjoying it! After all you put into this truck I hate to see it go, I wish you the best of luck with the engine and we're all pulling for you!

Slick67

03-24-2011 07:08 PM

Re: 1967 C10 Custom Big Window

Quote:

Originally Posted by 6772owner (Post 4575043)

Thanks Brother! Selling is not an option for me knowing that the engine will be replaced. It will eventually get back together then I'll get some vids of it cruisin down the road!

David67

03-24-2011 10:56 PM

Re: 1967 C10 Custom Big Window

Man that is rough.......really sorry to hear it! Hope its back up and running in a relatively short time.

funkytechmonkey

03-26-2011 01:17 PM

Re: 1967 C10 Custom Big Window

Slick... I know this is a little off subject of the current conversation but I wanted to ask you about the plastic fuel cel you got from summit. How do you like it? What made you go with a plastic cel instead of steel or aluminmunmunmun?

Slick67

03-26-2011 05:40 PM

Re: 1967 C10 Custom Big Window

Quote:

Originally Posted by David67 (Post 4575863)

Man that is rough.......really sorry to hear it! Hope its back up and running in a relatively short time.

It will be, just gotta keep my fingers crossed.

Quote:

Originally Posted by funkytechmonkey (Post 4579047)

I like it and went with it for several reasons. It is never going to rust for one, and it has a much cleaner look than a Blazer tank. There are a couple of things I would have done differently lookin back, but I am still happy with the outcome. One thing that could have made things a bit easier for the fuel filler neck tube would have been to cut a new hole on the driver back corner of the tank so the filler neck would be shorter, and easier to route (I cut one crossmember on the bed bottom). The original cap could stay in place and use another cap for the new hole. May cost about $30 dollars more, but after all the customizing, $30 would have been cheaper.

Jeffs70

03-27-2011 04:14 AM

Re: 1967 C10 Custom Big Window

Quote:

Originally Posted by Slick67 (Post 4579545)

It will be, just gotta keep my fingers crossed.

I like it and went with it for several reasons. It is never going to rust for one, and it has a much cleaner look than a Blazer tank. There are a couple of things I would have done differently lookin back, but I am still happy with the outcome. One thing that could have made things a bit easier for the fuel filler neck tube would have been to cut a new hole on the driver back corner of the tank so the filler neck would be shorter, and easier to route (I cut one crossmember on the bed bottom). The original cap could stay in place and use another cap for the new hole. May cost about $30 dollars more, but after all the customizing, $30 would have been cheaper.

Hey Slick. I have the same tank you do and now after seeing how you done things its going to help me better off figure out how I will be able to do this. and as you suggested cutting a new hole may be the way to go, well thats my exact thoughts and the way I will go about it. Thanks for all the info on that and pictures helped a great deal.

All times are GMT -4. The time now is 08:56 AM.

Page 50 of 104

« First

100

Last »

Show 40 post(s) from this thread on one page