The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1991 Blazers, Jimmys, and Suburbans Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=37)
-   -   Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy (https://67-72chevytrucks.com/vboard/showthread.php?t=554172)

El Campo 09-14-2013 09:28 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Looking really nice. Is that orange or red? I know u said in the past but can't recall. The black accessory drive will look nice
Posted via Mobile Device

67cheby 09-14-2013 09:28 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
5 Attachment(s)
and a few more Gary Angel of Street Driven Customs has sure been a huge help these last few weeks ! Another shot of the Hookers and The Lokar dipsticks !

67cheby 09-14-2013 09:34 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
It is Hugger Orange

oldman3 09-14-2013 09:39 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Really looking nice....Jim

Zoomin 09-14-2013 10:04 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Boy, that's purdy! Keep it up!
Posted via Mobile Device

RRC 09-14-2013 10:12 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
I was just checking out Eddie Motorsport's web site......Then i check out your thread and there it is!! A beauty S drive !! Looking good
Posted via Mobile Device

67cheby 09-14-2013 10:18 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
it is a very nice set up ! Great directions, only one part I am having a problem with I think they sent me the wrong power steering pump bracket

big_al_71 09-14-2013 11:05 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Mike great job and this build is definetly moving alot faster than the prior one lol!!!

67cheby 09-14-2013 11:28 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Thank Al ! Well the Amazing Kyle figured out my bracket problem for me , turns out it was my ignorance I thought I had an LS motor when I actually have a LQ motor so they sent me the bracket for the LS that I told them I had and not the LQ that I actually have ! My bad ! Thanks Kyle !

Scottshotrods 09-14-2013 11:48 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
looking good

Justin

Rusbuilt 09-14-2013 05:55 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
very nice!

jlsanborn 09-15-2013 03:08 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
WOW! That thing is looking sharp Mike. I really like how you keep the engine compartment stock/retro looking. I like big, chrome, bling-bling engines too but I think you've got great taste in that department. It's gonna be a sweet ride for Momma!

superflysteiny 09-15-2013 10:52 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
So fast man I can't believe how fast it is going. Looks great congrats to you
Posted via Mobile Device

Chvy2NV 09-15-2013 07:36 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Looks great man. I really like those pulleys.
What's different about the LS and the LQ ? What car is the LQ from?
Posted via Mobile Device

camok10 09-15-2013 10:54 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Quote:

Originally Posted by Chvy2NV (Post 6270714)
Looks great man. I really like those pulleys.
What's different about the LS and the LQ ? What car is the LQ from?
Posted via Mobile Device

Lq is the cast iron block truck motors

Blazer looks great keep up the fantastic work. I'm jelious of your skills
Posted via Mobile Device

Valhalla 09-16-2013 01:59 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Really nice man !!
Posted via Mobile Device

67cheby 09-16-2013 09:55 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
5 Attachment(s)
Thanks Everyone, here is a little work that was very EX-Hausting from this weekend ! LOL, pun intended ! Thank you FlowMaster Exhaust, all stainless 2 1/2 inch , and a big thanks to my buddy Gary Angel for working extremely late with me fri and sat night to get as far as we got on the exhaust ! Lots of crazy bends to clear everything !

oldman3 09-16-2013 10:01 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Mike, the exhaust is looking super, nice job...Jim

mcbassin 09-16-2013 11:04 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Very nice progress on the exhaust and chassis!

67cheby 09-16-2013 11:05 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Thanks guys !

superflysteiny 09-16-2013 11:17 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
What size is the exhaust Mike

67cheby 09-16-2013 11:17 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
2 1/2 inch

superflysteiny 09-16-2013 11:17 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Never mind I am an idiot I read the caption

superflysteiny 09-16-2013 11:18 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
You beat me to it

jlsanborn 09-16-2013 11:23 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Exhaust looks great!

Zoomin 09-16-2013 12:15 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
What's up for tonight - brake and fuel lines?

You've come a long ways, guys, looks great!

aggie91 09-16-2013 12:42 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
I took the weekend off from reading the forum. Man you got a ton of work done on her. Looks Great!

El Campo 09-16-2013 01:11 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Sure nice that you are running exhaust all the way out to the back. One of my pet peeves is exhaust that dump under cab and bed (although it looks like mine may be doing just that) :( :( :(

screaminchevypickup 09-16-2013 02:59 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Looking great mike!
Posted via Mobile Device

67cheby 09-16-2013 03:24 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Kyle post up some of those shiney pictures !

screaminchevypickup 09-16-2013 04:05 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
1 Attachment(s)
...
Posted via Mobile Device
Posted via Mobile Device

screaminchevypickup 09-16-2013 04:09 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
1 Attachment(s)
.,...
Posted via Mobile Device

screaminchevypickup 09-16-2013 04:10 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
1 Attachment(s)
Last for now..
Posted via Mobile Device
Posted via Mobile Device

67cheby 09-16-2013 04:26 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Kyles mirror service......he sells the prettiest mirrors around !

Zoomin 09-16-2013 05:06 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Quote:

Originally Posted by 67cheby (Post 6272180)
Kyles mirror service......he sells the prettiest mirrors around !

No kidding - and that's white. Imagine what Glasurit black would be like.

Rusbuilt 09-16-2013 06:13 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Very nice!

oldman3 09-16-2013 07:25 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Way nice there guys...Jim

jmedero 09-16-2013 07:39 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Nice cut and buff job. So many people screw it up with the cutting and buffing. Takes a lot of skill. I had to correct one the other day on a mega cab that got painted at the dealer. Anyways nice work man.
Posted via Mobile Device

mcbassin 09-16-2013 07:54 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Very nice work on the paint. Shiny!
Posted via Mobile Device

screaminchevypickup 09-16-2013 09:20 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Quote:

Originally Posted by Zoomin (Post 6272247)
No kidding - and that's white. Imagine what Glasurit black would be like.

I'm going to find out very soon.. Lucy maybe??:smoke:

Thanks for all the compliments guys..
Posted via Mobile Device


All times are GMT -4. The time now is 12:38 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com