Re: How to: Ruin a perfectly good C10
Chris I have to give credit to Steven and Kevin because I'm about to pull the trigger on the RTX as well. Credit goes to Ernie for the QA1
|
Re: How to: Ruin a perfectly good C10
Quote:
All mechanicals can/will leak. Some maybe sooner than others. But if it's used, it will get a leak @ some point. |
Re: How to: Ruin a perfectly good C10
Let's just throw blame all over the place... I'll blame Chris, I ordered the RTX gauges today. :lol:
|
Re: How to: Ruin a perfectly good C10
I love this! Everybody blames everybody else, so none of us are at fault for our own addictions. I finally feel like I belong in today's society! :haha:
BTW, I blame Chris too, because I fell in love with his yellow Blazer years ago, but couldn't afford it quick enough back then, so I've been making up for lost time. |
Re: How to: Ruin a perfectly good C10
Hahaha, this is getting good
|
Re: How to: Ruin a perfectly good C10
I blame my wife for being an enabler. I was surfing Craigslist, Facebook marketplace, eBay, and putting out the local feelers for a TKO or T56 when she says to me “stop doing things twice and just buy what you really want”. 10 minutes later there’s a new TKO 600 purchased and on its way....
|
Re: How to: Ruin a perfectly good C10
Quote:
|
Re: How to: Ruin a perfectly good C10
Quote:
Quote:
|
Re: How to: Ruin a perfectly good C10
Quote:
|
Re: How to: Ruin a perfectly good C10
2 Attachment(s)
So glad to see these updates Gringo! This is the first I've heard of using the Jeep fan. I've been hoping to use my stock rad and shroud also, so now its clear as day how do handle it.:metal:
In answer to the question posed by C10_ustacould, I can shed some light on what I used for hoses for the Gen 5. The upper hose shows the part number. The lower hose is harder to see but it is a combination of the factory 2014 Silverado at the water pump and spliced to a 90 degree bend near the radiator inlet. |
Re: How to: Ruin a perfectly good C10
I meant to ask about the Jeep fan last night when I was over there. How did you mount it, because I don't see the bolts that everybody else uses to hold the top arms to the inside of the shroud? Also, I thought the Jeep fans were a single speed fan?
|
Re: How to: Ruin a perfectly good C10
Quote:
Quote:
|
Re: How to: Ruin a perfectly good C10
2 Attachment(s)
Getting everything prepped for the TKO, which should be here Monday. Chatting with smbrouss70 over beers last night, he talked about how much trouble he had getting his transmission to engage the pilot hole due to the sloppy tolerances of the plastic alignment tool.
In a rare genius moment, I decided to wrap the tool in foil tape to take up some of the slack. 2 layers worked perfectly! The new 26-spline clutch is torqued in place and hopefully allows the trans to slide in with ease. |
Re: How to: Ruin a perfectly good C10
2 Attachment(s)
Also spent a little time rebuilding my hydro throwout, as I got a little excited and accidentally forcibly disassembled it during removal of the Muncie. It got a new piston, seals, scrapers, and c-clip. Good to go.
Driveshaft also now has a new Spicer 1310-1330 conversion u-joint, ready to accept the 31-spline slip yoke for the Tremec. Fingers crossed I won’t have to shorten the shaft (it will be close). |
Re: How to: Ruin a perfectly good C10
2 Attachment(s)
After a few days spent having to do FedEx’s job for them, things just got interesting:
|
Re: How to: Ruin a perfectly good C10
Boom.
|
Re: How to: Ruin a perfectly good C10
You're going to love it!
|
Re: How to: Ruin a perfectly good C10
I have a box like that in my garage! But I’m not nearly as far along as you. I’m going to be mocking everything up for fitment this spring.
Are you going to move the shifter to the mid position or just flip it around where it is now? Make sure it shifts thru the gears, sometimes the shippers set the trans box on end and it puts the shift rods out of alignment. It will be in 2 gears at once. Mine was bound up, but it was easy to fix. There’s a YouTube video out there somewhere about it. What clutch and throw out bearing are you using? Those are the last things I need. I’m using Capt Fab’s master setup, the Silver Sport bell, and I already have a flywheel. Cool build, I’ve been following it for a while now. |
Re: How to: Ruin a perfectly good C10
Quote:
Quote:
Quote:
I’m yet undecided on shifter location. I think rear-flipped will be fine, will see once I get it stabbed. Clutch is an 11” big-block style, RAM 78125HD hydraulic throwout. Setup easy and worked great with the Muncie, should be similar with the TKO. |
Re: How to: Ruin a perfectly good C10
OH damn! I want one of those for my GTO!!!!
|
Re: How to: Ruin a perfectly good C10
Quote:
|
Re: How to: Ruin a perfectly good C10
Quote:
Quote:
|
Re: How to: Ruin a perfectly good C10
Thanks for the info, Gringo!
|
Re: How to: Ruin a perfectly good C10
Anytime I need inspiration for the Burb, it always brings me back to your thread. I appreciate your willingness to share your findings and expertise with all of us. I also decided to go the Terminator X route and can't wait to start on that part of the project! Keep up the good work!
|
Re: How to: Ruin a perfectly good C10
Quote:
Quote:
|
Re: How to: Ruin a perfectly good C10
3 Attachment(s)
Well, the TKO is “in”. The easy, heavy-lifting piece is done, but it still needs a new mount spacer ( have a 3/4” piece of scrap wood in there for the moment), driveshaft shortened, clutch bled, floor clearanced, fluid filled, etc, etc.
I made these handy alignment dowels out of a pair of grade ‘cheap silver cad’ bolts. Simply lopped the heads off, chamfered the end, and cut a screwdriver slit for ease of removal. Worked like a charm! |
Re: How to: Ruin a perfectly good C10
2 Attachment(s)
Due to the dropmember moving the engine up, the transmission is very high in the tunnel, but should still just fit under the high hump. Remains to be seen, still need to fill the Muncie shifter hole and cut a new one.
|
Re: How to: Ruin a perfectly good C10
2 Attachment(s)
This also places the shifter ball in a very high position. Currently, I’m using a 16” long lever, which exacerbates the issue and contributes to a very long shift throw. I’ll look into using a shorter lever around 10-12”, and possibly a short-shifter base if needed.
|
Re: How to: Ruin a perfectly good C10
My shifter base boot pokes through the hump slightly. Diff motor mounted 5/8” higher than stock and @ 3* pitch. I remember the level 3 DM’s have the pitch at 5* or so,, didnt catch what series you have. Watch that 3rd gear...
|
Re: How to: Ruin a perfectly good C10
Quote:
This is the snowball I was trying so hard to avoid, but it sure is fun figuring out the puzzle :chevy: |
Re: How to: Ruin a perfectly good C10
Interested to see if the clearance will be enough all the way around in the high hump like you said. I guess it won't move around too much but.....
Looks killer man. |
Re: How to: Ruin a perfectly good C10
Quote:
|
Re: How to: Ruin a perfectly good C10
Quote:
Quote:
|
Re: How to: Ruin a perfectly good C10
Quote:
|
Re: How to: Ruin a perfectly good C10
Looks good, but wow it sits way higher than mine does. Like Inverter said, it is quite notchy at first, but after about 2,000 miles on mine it seems to have worn in enough to make it feel much better.
|
Re: How to: Ruin a perfectly good C10
4 Attachment(s)
Put in some time today getting the trans in its final resting place. The mount sits about 3.5” higher than before the dropmember, so to keep from stacking up a bunch of spacers, I cut the crossmember tab off and welded a 1.75” spacer to it. I cut holes to recess the mount bolts—one less thing to drag the speedbumps.
Once mounted, the trans ended up coming into the cab more than I wanted, but the driveline angles are good and everything is clearing. Fluid is filled and shifter is in, now I just need to build a driveshaft tunnel, which is wanting to occupy the same space as my bench seat. I think I’ll rename this truck “5-pound sack”. |
Re: How to: Ruin a perfectly good C10
1 Attachment(s)
The old girl got some sun today:
|
Re: How to: Ruin a perfectly good C10
1 Attachment(s)
:b69:
|
Re: How to: Ruin a perfectly good C10
|
Re: How to: Ruin a perfectly good C10
Sounds bada$$
|
All times are GMT -4. The time now is 08:43 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com