Re: 1968
got my tooth pulled today. so good night
|
Re: 1968
Hope it heals up soon! Sweet relief!
|
Re: 1968
Today I went and found a drivers side vent window frame. So tomorrow I will tear it apart and sand blast the frame. Don't know when I will paint the frame yet. I hate to get all the paint ready for just that little bit of work. I will install the new red sway bar bushings tomorrow I know. Had to move the air compresser to the back of the shop and run a longer electric wire to the compresser. Also a longer wire for the welder also to the back of the shop. felling a lot better now since the tooth is gone.
|
Re: 1968
Quote:
|
Re: 1968
If any of you guys need a wiring diagram for a HEI truck let me know and I will send you one.
|
Re: 1968
Today I was going to work on my truck. But I got a call and had to return to work for a week. So I guess my truck will have to wait. Got to build 4 counter tops and a bridge for a pond.
|
Re: 1968
Quote:
|
Re: 1968
nothing to report today. Sunday and took it easy.
|
Re: 1968
My drive shaft carrier bearing came in today.
http://i.imgur.com/MlVBxZPl.jpg I am working on another project for a couple. Building 4 counter tops this week. So not to much will get done on the truck. At least I will be able to order a wiring harness. I finshed installing the 2 inch insulation boards in the ceiling and walls in the shop. It will be nice and cool for the rest of the summer and warn this winter. |
Re: 1968
Today I had to wait for the materials for the counter tops to get here so I installed the red poly front sway bar bushings. It was good to work on the old girl. It seems like a long time since I have done anything to her.
here is the picture before I installed the bushings. Here is the sway bar bushings installed in the truck. It shows a lot of dust and sand everywhere. http://i.imgur.com/swmg85Dl.jpg http://i.imgur.com/sS4rp4ll.jpg |
Re: 1968
Looking good!
|
Re: 1968
Quote:
|
Re: 1968
This working everyday is for the birds or for the young. I will be glad when this project is over with. (counter tops that is) I enjoy working on my truck. I ordered a rebuilt dash cluster today. It takes three weeks to rebuild and ship it. I first have to ship my old dash cluster and he builds it with all new parts and gages and sets the speetometer to zero. I will post pictures when it comes in. Just another step into finshing this project.
|
Re: 1968
Good progress, George! Don't work too hard!
|
Re: 1968
Thanks matt it is getting a little better. But thanks for stoping by.
|
Re: 1968
Thanks for the wiring diagram, right now it's wall art.:chevy:
|
Re: 1968
Quote:
I hope it will do you better use than wall art. I will be wiring my truck in the near future. Good luck with your build. George |
Re: 1968
Today, the whole family was sick with a stomack bug. I think I was the better of the four. It was nice talking to you today Brian. I wish you luck on wiring your truck. Take plenty pictures for us guys.
|
Re: 1968
Quote:
|
Re: 1968
Today, I worked on the vent window frame. After I took it apart and cleaned it, I found the rust was a little worse than I thoght. So I cut the rusty part out and replaced it with good metal from another window frame. It turned out real nice. I also installed the mirrow suport bracket. The one that fits inside the door. But somehow I misplaced the other bracket for other door. So I will have to find a relacement.
|
Re: 1968
Hope everyone is felling better, George. The vent frames look good.
|
Re: 1968
Quote:
|
Re: 1968
I ordered the intake, wiring harness and dash cluster today. Eldelbrock high performer 7101.
intake dash, cluster, wiring harness 450.00 so again I have spent my limit this month. |
Re: 1968
Man, George, you are getting close!
|
Re: 1968
Sounds like you're getting ready to be very busy for a while with all that stuff coming in. You may not have any time to spend more money any time soon!
|
All times are GMT -4. The time now is 08:37 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com