Re: 1968
 

As you can see it cleans up the wires and the tail lights. Tomorrow I hope to finish up the other side. I HOPE.

Re: 1968
 

Today, I finished the other side tail light conduit. This side only took me 1 hour. I trained myself the first day and so it turned out real nice.

Re: 1968
 

I took the week end off and took the boys to a wild life attraction park and a haunted trail ride. They really enjoyed them selves.

Re: 1968
 

I got the front bumper braces installed on the truck finally. Waiting for more $$$$$ to buy the rear and front bumper. A trip to Ocala, Fl. to pick them up. no shipping. I should have a few more parts come in tomorrow. We will see.

Re: 1968
 

thats real clean... nice work

Re: 1968
 

thanks a lot there man. I do try my best.

Re: 1968
 

I mounted the washer bottle bracket and ran the water line to the bracket. I now need the bottle to make this job complete. I also took pictures of the brace for the bumper that I did yesterday.

Re: 1968
 

I have a few of those I won't be using (bottles)I'll dig out when I get back home free u pay ship if the condition meets your approval and your not in a hurry I'm away this week Phoenix........great ideas on hose routing ...thanks
JZ

Re: 1968
 

sounds great send you another PM on bottles

Re: 1968
 

Today, I done something that I was putting off for a long time. Adjusting the valves. I spent about 4 hours leaning over the engine. Every time I figured I had it done, there was a valve I missed. So I had to start over again. So tomorrow I will button the engine back up. All I have to do now is get it running and adjust them as she is running.

Re: 1968
 

Today, I buttoned up the rest of the engine. I still need a wire loom to make the wires look right. Now it looks like a rats nest. I also ran the one wire from the alt to the pass side to connect to the battery. I didn't realize that the wire was for a pass side mount. so I made a junction box and ran a short piece of wire the rest of the way. I not sure if I will leave the junction box where it is. But for now it is ok. I need to give old patches a good bath, maybe tomorrow.

Re: 1968
 

i will be adjusting my valves soon too. good work ,God bless

Re: 1968
 

I adjusted mine 6 times. I am a pro at it. I keep missing one valve so I started all over again.

Re: 1968
 

Today, It was such a nice warm day, I decided to was the old girl. Boy was she dirty. Setting under the canopy one would think it would at least stay a little cleaner.

Re: 1968
 

George
check your email sent you pics of the bottle ....got the pads thanks
Jess

Re: 1968
 

I'll take the bottle I sent you a PM

Re: 1968
 

I finally got the wiring harness on the way. It should be delivered on Nov 5th thru Nov 12
I also got the dual line sending unit for my Camaro gas tank. delivery date is Nov. 10

Re: 1968
 

I ordered a washer bottle from a fellow board member, Thanks Jess
Tomorrow I will pull the bench seat. It will make the wiring a lot easier to do. Can't wait till I start the wiring. A long time coming. This is my third year working on the old girl.

Re: 1968
 

I got plans in starting my wiring next week. Got a guy from the Tampa area going to help. He is really a stand up guy. Glad to see that there is still some good people out there. I have meet a lot of guys here on this board and I only had problems with a couple. Al. and LA. area. I have sold and bought all over the US.

Re: 1968
 

Today, the big brown truck came with my wiring harness. The mail man delivered the washer bottle also. So, some parts did come in.

Re: 1968
 

Today I started wiring the truck. Just getting everything in order to start running wires to the front and back. The kit came with a lot of extra circuits that I want be using right now. So I rolled the up and I will tie the up under the dash out of the way for now.
such as
power antenna
power door locks
power windows
electric fan
and a few others that I can't remember right off hand.

I had to weld up the 2 1/2 x 2 1/2 square hole in the fire wall also. My fuse block mounts to the fire wall not thru the wall like originally. So as you can see I hade to apply some bondo to make the hole disappear. Also here is the mounted washer bottle that came in the mail.

Re: 1968
 

I received the brake pedal and bezel in the mail today.

Re: 1968
 

looking good

Re: 1968
 

Thanks, every day I seem to get a little closer to the light.

Re: 1968
 

I got the gas tank sending unit coming in the mail tomorrow. I will install it and that job will be behind me. another job completed. TOMORROW or Tuesday

Re: 1968
 

Today, I worked on the firewall patch under the circuit panel box. It came out ok, not the best work I have done but ok. Mounted the fuse panel and ran a few wires to the rear of the truck. I have to put some wire protectors on the wires to the rear. I connected the tail lights and back up lights and used shirk tubing over the butt connectors as you can see in the pictures. I still have to connect the clearance lights on the rear before I put the wire protectors on them.

Re: 1968
 

Today, I finished with the rear of the truck except for the tag light. Waiting for the bumper before I can do that light. I attached the wire to the truck rail today and made some grounding block and a 12V block. To make the connections easier for the small stuff. As you can see in the pictures.

Re: 1968
 

Well done more wiring today. Got the front lights almost finished. I also got my new sending unit for the gas tank. A two line to replace the one line that came with the tank.
picture # 1 is the wire loom finished
picture # 2 is the wire for the engine compartment yet done.
picture # 3 is the new sending unit for the Camaro gas tank.

Re: 1968
 

today I pulled the gas tank back off the truck and replaced the sending unit with a two line sending unit. Made some rubber lines to fit the new sending unit. and done a little more on the wiring a slow process it is.

Re: 1968
 

Dang i havent recived any notifications in my in box for a long time, now i need to catch up, nice to know your making progress!

Re: 1968
 

Thanks a lot. seen your seat it look good.

Re: 1968
 

Today I done some more on the wiring. It is coming alone real nice. I am starting on the safety switch/back up switch. Tracing the wire down isn't no fun.

Re: 1968
 

More pictures. As you can see I have a lot of extra circuits left over. I might use in the future

Re: 1968
 

worked on the alt wires today and got them buttoned up. Now I need the dash to be done. Maybe Monday I will have that. I hope.

Re: 1968
 

Good progress. Keep it up!

Re: 1968
 

Its really coming together, looking good!

Re: 1968
 

thanks number98 and Richard for you comments they are always welcome.George

Re: 1968
 

Tomorrow I have a friend that is coming over and helping with the wiring harness, I got the front and rear lights all connected. We will be working on the dash and switches. Wish us luck.

Re: 1968
 

Today A friend came over and we buttoned up the ing switch, wiper switch, head light switch, back up light switch and half of the wire that goes to the dash cluster. I hope to have them done in a day or two. Tomorrow I will solder wires together.

Re: 1968
 

Looks like you are cranking right along... Looks great...