![]() |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
So this is a winters weekend.
Rain most of the day. But I did refit the seats, as well as sun visor, rear view mirror. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds And sun visor, rear view mirror. https://hosting.photobucket.com/imag...080&fit=bounds Video: https://youtu.be/5akhii7KPDw Who knows, tomorrow has more rain forecast. Maybe I can figure out the missing ignition barrel and anything else. |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Been doing what I usually do…..
Researching, lusting after a load of stuff. Missed out (sort of) on that red SAAB last week, or was it two weeks ago. So tomorrow I will ask the contracts boss for a day off on Tuesday to do a short road trip. £68.00 for a one way train ticket via London and then up country. The road route coming back registered as 200 miles. So hopefully a decent run to show it is good. With this new arrival, the S10 with 40k miles will be for sale. RULEZ IS RULEZ. One out, one in to keep balance. Though I still have to shift another. Destination: S****HORPE Excited. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds So this weekend very little was done other than much telephone and internet time. Oh, and cut the grass. Weekend gone. |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Well, still got insurance to get sorted for a day, or do I just bite the bullet and go full year at £240.00
A week is £75.00 which is steep just to drive 200 miles. In the mean time…… The very important road trip snacks have been bought, a few bottles of beer water/soda to be added. https://hosting.photobucket.com/imag...080&fit=bounds Oh, and we have a toll crossing over the Thames river at Dartford, collection and management recently went to a new company, so it is a total cluster$£€# as nobody seems to be able to get payments and admin done. I have tried repeatedly to get the new car registered and failed, despite it recognising it by brand, colour and model. Modern times, modern tech ehhh. |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Sally will be taking me to the station in a bit for the 3.5 hr trains ordeal.
Let’s hope no cancellations. Last night she came over for dinner and predictably in her usual dry way just said: “YOU WILL BE NEEDING THIS” Presenting the VAX Wet/Dry vacuum cleaner. Included a new bottle of shampoo, which it will be needing. https://hosting.photobucket.com/imag...080&fit=bounds From the very very limited information at hand, I know one of the first stops will be a serious deep clean. Then the usual new car investigation to make a list of broken, worn, missing bits. And then the fun starts. Again. |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Right gang.
I got home at 5.15 after leaving at 07.30 This morning Sweet Sally got up at stu-I-0-clock on her day off to get me to the station. Thank you Sally. Had a few bits to do at home when I got there. @Forddan68 popped around to look and took a few pics, including one of me…… GRINNING. Then came over to Sallys place for dinner. Now trying to unwind a bit, interesting how you get wound up slowly on a road trip. So…… Starting with Strood, my local station. https://hosting.photobucket.com/imag...080&fit=bounds Tickets . https://hosting.photobucket.com/imag...080&fit=bounds I also grabbed bits of footage for the YouTube channel. Hopefully edited and uploaded by tomorrow , so be patient. https://hosting.photobucket.com/imag...080&fit=bounds Then headed to St Pancras Station, followed by a quick walk over to Kings Cross for my second train up to Doncaster. https://hosting.photobucket.com/imag...080&fit=bounds Super nice, fast trains. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Soooo smart. Staff were great too. https://hosting.photobucket.com/imag...080&fit=bounds Got off the fast train, really enjoyed it. Certainly better than my local services. https://hosting.photobucket.com/imag...080&fit=bounds Getting to Doncaster it was time for train number 3 of the day. Next stop S****horpe https://hosting.photobucket.com/imag...080&fit=bounds Shortest train ever……. Two coaches. Diesel. Loved the sound, the drone and pace. https://hosting.photobucket.com/imag...080&fit=bounds 30 minutes later I got to my destination. That’s it. Good night. https://hosting.photobucket.com/imag...080&fit=bounds Well……. I walked out the station and saw Colin, the seller drive in. Perfect timing. Car was as nice as the photos showed. So I jumped in, and we headed to his home, 25 minutes away. Met his wife, the dog (she is awesome) and we moved money and paperwork about. Then he headed out to get the wife to Hull, to a hospital appointment. I sat and set up the Satnav, set it for home. Started up…….. Grinned like a mad man. Reversed out the drive, and drove off. Still grinning. |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
So I saw the van advertised a while ago on the tightly run ship that is “Unusual cars for sale”
I have always been kinda into Commercial vehicles, trucks, vans, anything practical. And this was the ad. https://hosting.photobucket.com/imag...080&fit=bounds But of course I already had the Rumblegrizzkin Chevy S10 in ZQ8 spec with its 4.3l V6 auto and extra cab. This is an amazing car/truck. Small, for an American, and actually has 4 seats, the front buckets are also a bench, when you lift the armrest, and the midget seat in the rear folds down for a skinny 10 year old. But as much as the truck is a great thing, at times my butt itches for a change, and weirdly, with work insecurities etc, the best fix is to buy more cars. IYKWIM So I got my head around to deciding to reduce the fleet significantly, including the Rezin Rockit should I get approached randomly (which has happened) The van is well known in certain circles and everyone wanted it, but nobody bought it. So I did my research and found out what I could, based on a few photos, and later a short start up video. I also approached a complete random stranger on GarageJournal.com whose avatar showed he lives in S****horpe (10 miles from the van) and after a long, enjoyable conversation with Vaughan, who turns out to be 70, just recovering from cancer surgery, and still rides a KTM 990, he agreed to go take a look at the van, and go for a short drive in it. This all happened last Sunday, and when he called me later in the day, there were no punches pulled, and his feedback was that is was a 33 year old van, and it had the bones of a good car. It needed a few bits tidied up ( I like to polish turds) and that if faced with the dilemma of buying or not, at the stated price, he would buy it. So I called the seller ( who was going to buy the truck off me, but ended up buying a 1972 Toyota Crown wagon on Saturday) and asked if there was any movement on price, which there was not. So I asked if I could still have a go at squeezing his bits, and he asked what I wanted, which I said was taking delivery of the van with a full tank of fuel. Monday was spent insuring, getting recovery sorted and generally trying to fit the day job into my schedule. By 3.00pm I had Green Flag recovery switched from the S10 for a total increase of premium of £2.48 Here is a video of my total motivation, and information on the van before buying it. https://youtu.be/ewf60bR00k8 I will add a few more pics and observations of the van later for those morbidly interested. In the mean time, having been an underused, 78k mile van, the battery gave me a load of solenoid clicks after I got back home last night. I went to Sallys place for dinner and to show her the van, which of course needed a jump start. So a battery is first on the list of items. I see that as a longer term wear and tear item if a car is not used much. |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
So on having bought the van and setting off with it, a few random observations of the first hour, well, 5 hours really.
When Colin picked me up as S****horpe station, he just came rolling in, and there was other nois in the background that the camera on the phone picked up on. https://youtu.be/WYSLvCNGBO4 But the van was shorter, and stockier than I had expected. ✅ The rumble from the twin side exits - OOOOOFFF ! ✅ Having been built and professionally lowered by THE DROP SHOP in Mission, Texas, the road holding, and drive is amazing for a van, being short and low, it can be thrown into roundabouts with gusto, and never wallowed like a typical American car or truck. The further I drove, the more confident I became and far from pushing it, I was assessing it all the way, and it gets a big ✅ Colin filled the tank as part of the deal, and I doubt he zeroed the trip meter, or filled it to the neck, but even in the most unscientific way possible, it used less than an indicated 1/2 tank on the 200 mile trip home, a mix of motorways and A-Roads, so another apparent ✅ Radio/CD/USB/Starship control desk has been cut in by an angry badger, so I need a new/used original dash filler panel to get back to standard as I could not figure the radio out, YET. So a certain ❌ Driving position in what is believed to be Corvette seats is good, but maybe 150mm or 6” too close for me. I will address that soon. ❌ Cubby hole fitted to the “Dog House” engine cover has someone’s old art airbrushed on it, replace or repaint ❌ Door speakers of unknown origin, vintage, ability, and missing a screen one side needs replacing ❌ Comes with a removable tow hitch, in my world that gets ✅✅✅ Load body has remnants of amplifiers etc cut into it, if they work, reinstate and use, if not, remove and cover holes ✅❌ Getting home was a pleasure, simply because it was an unknown quantity to grab and drive 200 miles ✅ Going down the side of the house down my narrow alley necessitated folding a mirror in, it is that wide @ 77” and driving out, I just folded both in, wound the window down and kept my eye on keeping the drivers side 6 inches or 150mm from the concrete posts of the fence, naturally, the other side would be good enough. So size gets one of each too as I would have it despite the size. ✅❌ Due to overall limited use, the battery made it home, then left me in the lurch a few times in quick succession at home, new battery getting collected later today £60.00 Certainly not a seller problem, but a cost ❌ Service records, despite low mileage non existent so no base to work from doing standard maintenance, so need to get a full fluid, filters and ignition service,,again, part of ownership, so neither good nor bad, but possibly bad due to previous ownership ❌✅ Overall impression, looks, first drive gets ✅✅✅✅✅ of these and ❌of these. Time will tell what else needs doing. THE DROP SHOP lowered it in the 90’s They are also on FB and if you look at their builds, there’s some neat stuff. https://hosting.photobucket.com/imag...080&fit=bounds Approximate collection miles. I had done 10-20 miles already. https://hosting.photobucket.com/imag...080&fit=bounds Tow hitch is a massive win in my world of practicality. https://hosting.photobucket.com/imag...080&fit=bounds Driving position in what is believed to be Corvette seats is good, but maybe 150mm or 6” too close for me. I will address that soon. https://hosting.photobucket.com/imag...080&fit=bounds After collecting me, the last pic of it in S****horpe with Colin driving. https://hosting.photobucket.com/imag...080&fit=bounds When I got home I took some photos. I will do the interior at the weekend with before and after etc. Against the S10 it shows a bit of comparative size, keeping in mind the S10 is a mini truck. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds And on its own. Chunky tyres on 15” wheels fill the arches nicely. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Bringing it out, shows a tight fit. https://hosting.photobucket.com/imag...080&fit=bounds @forddan68 came around and took these pics for me, https://hosting.photobucket.com/imag...080&fit=bounds A very happy man I guess. Already liking it. https://hosting.photobucket.com/imag...080&fit=bounds Thanks for stopping by and all your comments, advice and input as always. . |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
My friend Bob Heine in America made a comment and observation on how,clean the rear is, along with the spoiler on top, compared to a more standard van.
And that spoiler really works in this case. And I am not a great spoiler fan, The smoothing, shaving handles, roll pan…… Absolutely improves the look. Did a quick screen grab rear end pic and found another custom van with more original equipment on Google. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Lots to like about this van. |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
[quote author="@metalshapes" source="/post/2792437/thread" timestamp="1691608900"]"The smoothing, shaving handles, roll pan…… Absolutely improves the look."
It really does. Big difference. I'd be tempted to do a little smoothing & shaving to the front to complement it... :)[/quote] Your suggestion is honestly at the top of my list, since I saw the van. I did the same to the S10. Clear lenses £65.00 https://hosting.photobucket.com/imag...080&fit=bounds Massive improvement to this…… https://hosting.photobucket.com/imag...080&fit=bounds Either new or good used will go on there, but I think new will just look better than partially faded. Watch those spaces. |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Just did my first possible “repair” on the van.
When I got back on Tuesday evening, and later tried to start it for @forddan68 and my neighbour who is a fan of American cars, there were a few clicks and then it took. After dinner at Sallys, she had to jump start me as well, and the same thing happened, but once the jumper cables were on, it started instantly. Last night, due to a huge truck fire on the A2/M2 the roads where I had planned to go buy a battery, we’re gridlocked as people seemed alternative routes home. So in the end I turned around, still 1.9 miles from my destination. Came home and went to look at the battery again and take a few pics of the engine bay. So I wriggled the terminals, and the earth which is tucked away under the fender, was loose enough that a bit of wriggling would see it come off. So this morning I grabbed a very small 13mm socket and tightened it, and it took quite a lot of tightening. Tried the ignition and instantly fired up. https://hosting.photobucket.com/imag...080&fit=bounds Could the clicking start up be solved? No idea, until it happens again and something else proves to be the issue. Fingers crossed as always with a new toy. |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
So when I collected the car, the seller said only one key.
Kinda disappointing as it means a £10.00 key purchase adding to the cost of buying and fetching the car. Remember, all the peripheral costs are costs, not magic. So train, a potential key cut, a day off work are real costs I add to the purchase price calculations, then of course there are these, insurance, road tax, recovery insurance adding up to about £800.00 yes, really, the cost of reversing off the driveway at home for the first time. These are yearly costs, so you could split them by 12 bringing you to about £67.00 per month, or £2.00 per day excluding fuel and repairs/service costs. So a pleasant surprise when I was driving down the motorway was a spare set of keys falling from the sun visor, onto the floor by my feet, £10.00 reduced. When I got home I noticed a Haynes Manual and original owners manual on the floor. So more moneys saved as I had intended to go buy these. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Last night I did a quick video and also got a couple of engine bay pics. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Quick video: https://youtu.be/9WubHv51_gE Tonight after work I washed the S10 as I want to park it on the sidewalk with a for sale sign on the screen, and clean sells. The Astro was pretty dirty when I took it, well….. it was no worse than the S10 or my company car tbh, but washed and vacuumed made a difference. I was standing looking at this in the back yard earlier…… even before I washed it, and it really made me smile. This is a good looking car for sure. https://hosting.photobucket.com/imag...080&fit=bounds So pleased I got lucky to find it. |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Right…..
Back to our normal transmission. Time to clean out the inside, vacuum the interior, and wash the outside. So reversed down my reasonably narrow alleyway. Parked up and cleaned the interior, well, first phase. https://hosting.photobucket.com/imag...080&fit=bounds Grubby as heck and after removing all the junk from inside, as per video, it was clear this is a mess. https://hosting.photobucket.com/imag...080&fit=bounds At some point, the van, which started life as a white commercial vehicle, became yellow. Look at the old colour sticking out on the rear door. I need to make up a strip to cover and close that all. I do wonder if the yellow phase was associated with when it was lowered and the interior all done out, including the “pink and blue” graphics. Anyway….. another job to get to. https://hosting.photobucket.com/imag...080&fit=bounds Little jobs. Like finding and replacing the fuel filler door release. Currently an old pair of pliers. Surely, some sort of improved version of the pliers cannot be that hard to make. Think hand grenade pin and slip over the nipple in some non return way type design. Not that hard to make and fit. Another job to get to. https://hosting.photobucket.com/imag...080&fit=bounds After vacuuming the interior, I needed to,was the van, because I like them,clean, and had driven at least an hour on the motorway in the rain. This pic was taken, still dirty. Possibly one of my favourite photos so far. https://hosting.photobucket.com/imag...080&fit=bounds Not sure if one can see the difference afterwards…… I had moved it back, down into the garden a bit. But it is cleaner. https://hosting.photobucket.com/imag...080&fit=bounds Then I brought themS10 through and washed it as well. Mickey had told me off for parking it out front, FOR SALE but dirty, covered in spiders cobwebs. So it was cleaned as well. https://hosting.photobucket.com/imag...080&fit=bounds Next job on the van will be to try get the rear loadbed floor carper a bit cleaner. Rust, grease, and whatever else after 30 years must be able to get changed. Wet vacuum job to get to next. Thanks for checking in and all those who take the time to post a reply or response. It is the weekend. Cheers. https://hosting.photobucket.com/imag...080&fit=bounds .BONUS VIDEO. https://youtu.be/y7V5X01h7Oc ENJOY. . |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
[quote author="@93fxdl" source="/post/2792671/thread" timestamp="1691783556"]Currently enjoying the video on the tv, a suggestion for he front sidelights, since you intend to fit clear indicators, why not pair them with switchback leds, white for sidelight, but flashes yellow
Ttfn Glenn [/quote] Very good thinking Glenn. I will certainly investigate that. One of my clever mates can possibly help, and prevent me spending days figuring it all out, like I did on the S10. https://youtu.be/jdIu7KdpWs0 That was a great modification to remove the amber front indicator lenses. If the clear indicators for the Astro allows it, that would be the best way to remove those horns from the front. |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Next job after the vacuum cleaner was to get the carpet cleaned.
Even small jobs take time. https://hosting.photobucket.com/imag...080&fit=bounds So I started with Vanish, clothing bleach type stuff. https://hosting.photobucket.com/imag...080&fit=bounds Wet the carpet and worked it into all the stains and marks. Then left it to react for a while. https://hosting.photobucket.com/imag...080&fit=bounds Followed by the wet dry VAX cleaner. https://hosting.photobucket.com/imag...080&fit=bounds Resulting in this. https://hosting.photobucket.com/imag...080&fit=bounds This morning I opened all the doors by 06.30 for it all to dry out some more. https://hosting.photobucket.com/imag...080&fit=bounds Happy with the improvement. https://hosting.photobucket.com/imag...080&fit=bounds The 6 litres of water I used probably only returned 2 litres of very dirty water. https://hosting.photobucket.com/imag...080&fit=bounds And for those who do not read words,…….. VIDEO HERE. https://youtu.be/80Uv9CkK5l0 This morning once I opened the van to dry out the carpets. I had a QC inspection. Passed the security muster as well. https://hosting.photobucket.com/imag...080&fit=bounds George suggested another road trip. . |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
So……….
The front end, lights etc. I had a suggestion from a friend to get an ally grille, to go with the clear side repeaters. Not sure about that. Had it on the 79 Blazer and replaced with a new old stock original, which I preferred Also, need to see if there are smoothed/closed in headlight bezels out there, that could work too. Along with a clear lens side repeater and possibly deleting the current side lights, followed by installing switchback LED bulbs as suggested by a few guys and @westbay. @zeberdeewesty did a couple of photoshop deletes….. I like that, compared to the current look. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Yesterday, Mate John, the driving school instructor was over for a few hours to look at the van. We checked all the lights and found one bright lamp out, and also the reverse lights had been replaced with yellow bulbs as indicators, a great idea IMHO as red indicators are often not seen clearly on American cars. So I need to go find a correct light bulb, either in the garage or shop. |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Took a quick pic of the rear view mirror, trying to show the black with blue metal flake paint on there.
Kinda lost unless you look for it, in bright sunlight. Still, pretty too. https://hosting.photobucket.com/imag...080&fit=bounds |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Busy weekend.
The van has a ton of things to address and keep me busy. And as I have gotten to know it more and more while washing, cleaning and touching and feeling it, I am realising that I lucked out again. Keep in mind, there could still be 101 surprises hiding out of sight somewhere. Mate John, one of my old lodgers and driving instructor, who helped with the electrics of the Rezin Rockit, came around yesterday. He is a tech fan and bit of a guru. He really liked the van, casting a critical eye over it. https://hosting.photobucket.com/imag...080&fit=bounds Also got straight into tuning the intergalactic radio for me https://hosting.photobucket.com/imag...080&fit=bounds One of the jobs I had identified after washing the van at first, was the Center Line billet alloy wheels that needed to be brought back to life and shine. https://hosting.photobucket.com/imag...080&fit=bounds Up close they looked really tired. https://hosting.photobucket.com/imag...080&fit=bounds So I got some Autosol metal polish and some rags to just try it out…… John had the camera. Test spot looked much better. https://hosting.photobucket.com/imag...080&fit=bounds And 35 minutes later…. https://hosting.photobucket.com/imag...080&fit=bounds Autosol all the way round. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds And then a lovely pic, possibly my favourite so far. 140 plus minutes well spent. Another hour to be spent today. https://hosting.photobucket.com/imag...080&fit=bounds So that was a great result. Overnight I remembered how the Poorboys wheel sealant added to the S10 wheels I had refurbished. https://hosting.photobucket.com/imag...080&fit=bounds So this morning I got the tub, some rags and started again. Clearly this sealant polish was still improving the work as it took more ally from the surfaces. Elbow grease time. https://hosting.photobucket.com/imag...080&fit=bounds And the RESULT IS AWESOME. https://hosting.photobucket.com/imag...080&fit=bounds It really is rewarding when you see the changes, day to day. And the photos allow you to look back and SMILE. Again, video for the lazy traveler . https://youtu.be/uBvvhqyndCk More tomorrow for those who still want to see what is changing. Weekend over. . |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Another weekend gone.
Got loads of bits done, had a few visitors as well. Drove the S10 around and went food shopping in it on Sunday. Got stopped by a young guy and his lady in Morrisons Carpark to tell me he really liked the truck. He was driving a 22 year Old Ford Puma on nice wheels, fitted with ST170 brakes and a few other modifications. Nice when younger guys know what you are talking about. He also knows his endurance racing cars, right down to the model numbers etc. Also showed him a pic of the Rezin Rockit, and he instantly recognised the RX7 seats and liked the fact it was MX5 in there. My old lodger, John who is a driving instructor, came over on his full power Yamaha V-Max powered Trike on Saturday. He wanted to see the van of course, and had helped a lot with morale boosting when I built the RR as well as sorting some wiring issues out for me. One of the jobs I was doing just when he got here, was making a little temporary release handle for the fuel filler door which had long since lost its tab. Being replaced with a small pair of side cutters the seller showed me how to poke it into the hole, pull the cable and release the filler door. What a terrible solution. https://hosting.photobucket.com/imag...080&fit=bounds So I took some welding wire, made a finger sized loop and a small tab to crimp onto the nipple on the release cable. This is temporary until I can find a correct part to purchase either online or on my road trip to the USA. STORY HERE: https://forum.retro-rides.org/thread...023-road-again Shaping it. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Fitted and crimped in place. https://hosting.photobucket.com/imag...080&fit=bounds John is like a Magpie, not much goes unnoticed or misses his scrutiny, so it was a pleasure having him there. Rear door stop, one missing off the drivers side door. Anyone got one to sell or donate? https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Aircon/blower controls missing a small button. Got one? https://hosting.photobucket.com/imag...080&fit=bounds We also tested out some Autosol on the alloy wheels, that was reported before, so John cost me 3-4 hours of my life. For the better though. I crawled, well, poked my head under the van, as it has been professionally lowered when “The Drop Shop” built it originally. I will just post a bunch of photos of the undersides. The lack of rust, and even just minimal surface rust attests to the fact that this was a show van, and pampered for most of its life. Removable tow hitch is a huge bonus as one can use the van as a real tool. Also never seen a leaf spring quite like these…….. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Looking at the sills as well……. Starting to feel at this point, like I may have got lucky again, like the S10, only 78k miles, and a body that is hard to believe the condition of. Yes, it was a Texas van before it came here, but it is good. IMMACULATE SILLS TOO. https://hosting.photobucket.com/imag...080&fit=bounds Last task for yesterday was to use some Auto Glym bumper and plastic restorer gel on the small lower lip/spoiler. Result was again even better than expected. Before. https://hosting.photobucket.com/imag...080&fit=bounds Result shows in the video. VIDEO HERE: https://youtu.be/JF-kFzSQlFs Thanks for checking in. Now back to work. . |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Well………
Any road trip sees me “IN” This time…… I was the destination. As David Bowie sang…….. Ch-Ch-Changes. Today part of a multi vehicle churn started. @glenanderson , @craigrk and I were initiating a multi vehicle trade and swap around. Todays phase was Glen returning a lawn tractor that came though here a few years ago, that his son has used to earn his Duke of Edinburg award. The Lawn tractor, along with the one I fetched from @frankenhealey last year, or was it this year, will be headed to Craigs home in Shropshire. He originally wanted the Canta, and had first refusal on it, but also realised that his wife has a glass jar on the kitchen window sill that is reserved for his testicles. So choosing to not walk like John Wayne, he let Glen take the Canta on as a new father and son build, continuing with what I started (I just cleaned it up a bit) Mate Fil, “Sparkplug” had to step out of the race, having had second refusal as his Sprinter camper van blew up its engine. So Glen and son Fin have a Canta, and Craigs collection of lawn tractors continues to grow. I have gained a bit of space. Which will increase once the Rezin Rockit is sold. And then the Blue Van will be stored in the carport as it is in such good condition. Hopefully the S10 finds a good home as well. Video to be edited later and uploaded even later. But suffice it to say that as always, having Glen pop over was a great pleasure. His,Son Finlay was very taken wit the S10 and Rezin Rockit, as he should be. But the Canta had both of them laughing like madmen when they saw it, got in it and drove it. This little car really does bring a load of joy for what it is. So the tractor as delivered, used to be red…….. Perfect name too. https://hosting.photobucket.com/imag...080&fit=bounds While,Glen looked the van over, he remembers the rear door stay, opened it and poked a finger in the hole……. https://hosting.photobucket.com/imag...080&fit=bounds Producing a door stop…… Like magic. https://hosting.photobucket.com/imag...080&fit=bounds And of course Fin was taken with the van as well, I let him start it and rev it on the driveway, though, given a choice I suspect he would have the truck. Happy chappie .https://hosting.photobucket.com/imag...080&fit=bounds All too soon it was time For them to head home…… Glen to face Mrs Anderson, who is not impressed. But I am sure she prefers him tinkering, rather than drinking or doing silly stuff. Happy team, headed out. https://hosting.photobucket.com/imag...080&fit=bounds Looking forward to seeing how Glen and Fin progress and proceed with the Canta. |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Speaking of paint……
Another 75 minutes of my life, taken by the van. With Amazing results. @braaap had done some pointers toward the worst damage, done by someone removing songwriting and not completing the job. I love washing cars and sometimes just sitting next to them in the sun and shade, to identify damage, marks, things that you miss on photos, or even when excited to make a purchase. Once washed and dried, I saw more marks all the way around the van. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Looking at the drivers side with the sun behind me. Clearly not a good thing. https://hosting.photobucket.com/imag...080&fit=bounds And from the other side, looking toward the sun. Part of the van was in the shade,,so it also shows how well this paint reacts with light. Damage https://hosting.photobucket.com/imag...080&fit=bounds I have two bottles of polishing compound. Went with the G3 as I have used it a few times before. https://hosting.photobucket.com/imag...080&fit=bounds Then Started to polish by hand, again a two finger job, much repeating, back and forth. First section looking a load better. https://hosting.photobucket.com/imag...080&fit=bounds Took my time and got many many passes over the damage, also broadened my strokes so as to blend with existing paint. Passenger side has been painted over, the masking lines wire never buffed back or blended, so I did that as much as I could, and the improvement was vast, though one will always be able to see that there is a line, fortunately, being high up, it misses most scrutiny. I also did the lower side on both sides were careless box moving, driving, parking too close to whatever caused scuffs, left marks, which now are gone. Side panels both look a lot better. https://hosting.photobucket.com/imag...080&fit=bounds Drivers side front fender seems to have had some wet and dry over it, but not cut back and polished either, so I gave that a go with great results. https://hosting.photobucket.com/imag...080&fit=bounds Final result. BOOOOOOMMM…!! https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds After dinner the sunset was amazing, and I wished the van was out front. It plus have made a great photo. https://hosting.photobucket.com/imag...080&fit=bounds And for those following on YOUTUBE VIDEO. https://youtu.be/BKX3Q-QOJMA Thanks for checking in. . |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Sometimes the camera does not quite capture the changes.
Went out after work last night for a few minutes. Polished the indicators and side repeaters with some G3 as I was on a roll. Both actually showed an improvement. https://hosting.photobucket.com/imag...080&fit=bounds And after of course. Still convinced I need a pair of clear lenses. https://hosting.photobucket.com/imag...080&fit=bounds More small jobs waiting. . |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Just how small has the world become.
My buddy Stas in Siberia sent mr this pic. He was watching my youtube channel. https://hosting.photobucket.com/imag...080&fit=bounds A friend, JB Math in Oklahoma gave me what I regard as a lovely compliment yesterday, saying that I have an innate ability to find those little imperfections that when corrected, make a nice impact. To me, some of the bodges and repairs I see, make me wonder why people did not just do it right in the first place, as the effort is the same as doing it right. Yesterday’s small jobs would have @nickwheeler rubbing his hands together in glee. The black gloss paint came out……. A few small jobs to do, necessitated some masking up, and also dismantling weather seals in the door frames, but with a nice impact. First job, mask up the cut and shut Recarro seat bases. Welded, ground and left like that…… Nice job mr Craftsman. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Masked and painted. https://hosting.photobucket.com/imag...080&fit=bounds Surely looks better already. https://hosting.photobucket.com/imag...080&fit=bounds Next job was the A-Pillars, weirdly missed when painted blue and so obvious. After poking and prodding, realised I could remove the door seals on both sides, passenger side is a long one including the sliding door. Then washed many years of accumulated dirt and muck from there. https://hosting.photobucket.com/imag...080&fit=bounds Cleaned up. https://hosting.photobucket.com/imag...080&fit=bounds Painted. https://hosting.photobucket.com/imag...080&fit=bounds At the same time I prepped the rear door, that is missing some trim. The other door needs its upholstery to be fixed back neatly as well, maybe a weekend job. But plans include driving and enjoying the van, and making up for forgetting Sally’s birthday. https://hosting.photobucket.com/imag...080&fit=bounds Left the masking tape in place till this morning and was pleasantly surprised at the changes. Looks much better imho. https://hosting.photobucket.com/imag...080&fit=bounds Doors…. I had to look twice at where the yellow was sticking out so obviously before. Really pleased with the result. Seals back in place. https://hosting.photobucket.com/imag...080&fit=bounds And the rear door needs me to make up a piece of trim, probably in black, or dark grey to go with the upholstery trim. For all the zoomers, yes there is damage to the rear glass tinting and some genius sprayed some black aerosol paint on it. Not ideal, but a good solution, especially looking from the outside, until,I get to replacing the tint. Possibly both sides at the same time. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds As I get the small jobs done, I am getting to like the van more and more. Realising that it has essentially had a very good life to date. Friday…….. last day of the week. . |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
After work a quick few small jobs.
WD40 in the lock barrels, got all three doors to lock. In a secret sequence. Also went back to the garage and fetched the G3 and some cloths. The rear end, roll pan and lights were not as tidy as I would like them. So rear end paint polished, followed by the rear lights that were less than good. https://hosting.photobucket.com/imag...080&fit=bounds After quite a bit of buffing, the results were satisfactory, or a bit more than that to be honest. https://hosting.photobucket.com/imag...080&fit=bounds Plan is to go out for a drive with Sally tomorrow. No idea where to go really, and @glenanderson will possibly have advice on Dover and Folkestone, I hope. Not really interested in Dover castle, expensive and done recently.. Any ideas for greater Kent gang? No tight car parks of course. . |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Took the new van and Sally for a ride today.
One of the places we ended up was on the Isle of Sheppey, at good friend Darren’s engineering shop. Always one to look for other avenues of revenue, and also liking a project or two on the side. This is current with great potential. https://hosting.photobucket.com/imag...080&fit=bounds After making a full round of his newest car, engineering and fun stuff, I searched his massive dumpster/skip in case there were treasures in there…… No luck. But, associated with one of his current engineering projects, was this…….. We got into a quick negotiation and a sensible price was agreed. This may end up being a fart in a wind storm, or it could become real thunder. SO ANY INPUT, PAST EXPERIENCE, PHOTOS, DESIGNS, WARNINGS ( fiscal and H&S) are welcome. At this point Sally just said OMG, Really? And carried on on her Instagram. https://hosting.photobucket.com/imag...080&fit=bounds So we were discussing me taking ownership of this beauty after it has served its purpose here…… And turning it into a 4 wheeled drivable vehicle. If Barstools, Ammo cases, lawn tractors and mobility scooters can…… then why not a Jetski. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Steering wheel, rear view mirrors, comfy seat. WHAT MORE COULD YOU WANT? https://hosting.photobucket.com/imag...080&fit=bounds So right now, it is just an idea fuelled by a lot of cannabis and beer. Input welcome. Don’t be negative, get with the madness. |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Up early, as usual, then went to fill the van up to its neck, suspect 75 litres or 15 gallons, too lazy to search Google right now.
Local gas station is still running a manned forecourt, so you may not fill your own car/truck. https://hosting.photobucket.com/imag...080&fit=bounds Likes the Dino-Juice. Let’s see how much it likes it. https://hosting.photobucket.com/imag...080&fit=bounds Once Sally got here, we set off. She took a pic of me because of my silly grin most of the way. https://hosting.photobucket.com/imag...080&fit=bounds One of the places we ended up was on the Isle of Sheppey, at good friend Darren’s engineering shop. Always one to look for other avenues of revenue, and also liking a project or two on the side. This is current with great potential. https://hosting.photobucket.com/imag...080&fit=bounds After making a full round of his newest car, engineering and fun stuff, I searched his massive dumpster/skip in case there were treasures in there…… No luck. But, associated with one of his current engineering projects, was this…….. Check the last two entries https://forum.retro-rides.org/thread...-real?page=179 Once we’re done at Darren’s it was off to some shops. Now we all know the saying, “If you don’t look back at your car when you walk away, you bought the wrong car” Well, I never expected to hear the words from a usually reserved, noncommittal Sally. Half way to the shops, she stopped and looked back, saying “You,did get lucky finding such a nice looking van” High praise indeed from the Queen of Yeah, it’s OK. Coming back, I felt compelled to take another pic of the same blue van, these colours really do love a bit of light. https://hosting.photobucket.com/imag...080&fit=bounds Lastly, an early morning message from Dennis…… Looks like it is going to continue being hellishly hot in the USA. https://hosting.photobucket.com/imag...080&fit=bounds I don’t really care, as long as I get there. |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Small jobs.
They keep on popping their little grubby heads up. Today, after taking the day off yesterday to do a very belated and apologetic birthday BBQ, Sally went home to clean her already clean house and various other tasks. This made her a lot happier than a fist full of cash I gave her as an apology for forgetting her birthday. https://hosting.photobucket.com/imag...080&fit=bounds So this morning I got going early because time slips away quietly and quickly. Steering wheel has irked ,e from day one, just the way paint had flaked over time. https://hosting.photobucket.com/imag...080&fit=bounds So I polished the ally boss, masked the plastic section and flatted the ally section. Then wrapped most of the interior in T-shirts and an old sheet in order to apply some satin black. Result. Improved. https://hosting.photobucket.com/imag...080&fit=bounds Video. https://youtu.be/GXNDFWaGBW4 Once again, not a 5 minute job, but a small one that makes for the right result. Back to work tomorrow. . |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Remember the USA Road Trip ?
https://forum.retro-rides.org/thread...023-road-again I am looking forward to three weeks away from work, though I never stop thinking about it. Dennis just sent this, this morning. 40’C when I get there on Friday. Add in some humidity, and it seems I will be flying in shorts and flip flops. I know how the heat hits you in the face as you step out of the buildings. https://hosting.photobucket.com/imag...080&fit=bounds Luckily even the workshop has air conditioning And beer. |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Seems Someone used an angry badger to enlarge the radio hole.
Fitted is a unit I want to remove as I do not understand it, and also the bottom of this dash surround has been cut. I will be in the USA soon, with a very large case. And scrap yards are always included in my road trips. But I was wondering if anyone knew someone who was stripping a Mk1 van, this one is a 1990 short panelvan Astro. Any pointers are much appreciated. . https://hosting.photobucket.com/imag...080&fit=bounds |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
RIGHT
NEXT SMALL JOB, WITH A BIT OF RISK, THAT BUGGED ME FROM THE DAY I COLLECTED THE VAN, WAS THE DOORS. Sorry, caps lock. After all the years the van has been on the road, the fabric used is actually incredibly well preserved. But it is grubby, more so to the naked eye, than the camera lens. So I decided to use some fabric and carpet cleaner, along with a nail scrubbing brush, at the risk of messing it all up. Before. Dirty, dull. https://hosting.photobucket.com/imag...080&fit=bounds After. https://hosting.photobucket.com/imag...080&fit=bounds Graphics, faded and dusty. https://hosting.photobucket.com/imag...080&fit=bounds After, certainly much better. https://hosting.photobucket.com/imag...080&fit=bounds Another job, one I usually do the day I wash a new car, is to clean the interior surfaces, knobs, stalks, controls and all grooves with an ammonia based cleaner like Jif/Cif/Handy Andy whatever, and then using some form of plastic or leather or even wax based wood polish. This time it was Auto Glym, because I have bottle I bought previously. Result is a distinct improvement. https://hosting.photobucket.com/imag...080&fit=bounds VIDEO https://youtu.be/qxjT2TBaXq0 That is where we are up to today. A cleaner van. |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
After Glenn commented about the dash, and after I cleaned it up, I was wondering if there was anything missing here.
It looks like there should be a mesh grille over the 6 holes, but there are no mounting holes, clips or grooves. https://hosting.photobucket.com/imag...080&fit=bounds However, I was thinking, if I cut to shape painted some of this scrap plastic mesh I found on a discarded laundry drying rack, and just dropped two long strips into the groove, one each from the centre, it could look factory and be a slight improvement. https://hosting.photobucket.com/imag...080&fit=bounds Of course I have no clue what the original Mk1 vents looks like up front. Any pics out there? |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
The hive mind that is GarageJournal.com and other forums, has come up trumps.
The dash, radio and blower surround section that I was looking for could be available new. @grenade Found a used one on eBay for $70.00 However, Bob Heine in Florida found this…….. Half the price. https://www.gmpartscorp.com/p/Chevro...oaAkcaEALw_wcB https://hosting.photobucket.com/imag...080&fit=bounds Now of course the next trick will be to see if they have one in stock and to get it shipped to Dennis’ in St Louis. Pretty pleased with that. . |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Day one of the American road trip reported……
https://forum.retro-rides.org/thread...023-road-again I still need to edit and upload the Youtube video. So maybe later. |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
So Rural King is part of every road trip……
Once inside, you have farming stuff, clothes, food, guns, tools, and life stock. I know some people looking and following this trip won’t agree with all I post up, but this place must have something for everyone. https://youtu.be/pLSYkeZb7Gc?si=HVrfz1dkI2mLiGHX |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
And the real first episode……
From the 2023 road trip. https://youtu.be/U9reUcSTKT4?si=ksIYZa6vkZ5GgfHt More as I get to upload as Wi-Fi is a bit slow….. Thanks for watching. |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Hey Grizz, I popped in to say howdy. I exited the site for a bit. Back on (maybe) and curious about what you've been up to. I saw a startlingly blue Astro van as I scrolled down to the reply button. I'll be interested to check it out.
|
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Quote:
Thanks for checking in and posting. I will add the link for you in a moment to where the Astro van has its primary build thread and complete story. Feel free to read, join, comment if you wish. |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
BACK TO REALITY…..
3 weeks in America gone in a flash. https://forum.retro-rides.org/thread...023-road-again My planned trips completely aborted and rewritten. Saw some of what I planned and saw, a lot that I had not planned and saw made this a much more rewarding trip. Only did about 3800 miles or 6100km but that was enough to keep me very busy and out of sleep. Driving 500 miles to buy a 1934 Ford, with an 81 year old veteran driving the tow rig, sharing many stories, only to find after loading the 34 that nobody remembered to bring the pile of cash sitting on a shelf in a garage in St Louis must be the stuff of road trip movies. Driving 360 miles to go meet strangers, then another 40 miles to have dinner, followed by taking them back home and then driving many more miles before settling in possibly the best $80.00 motel in all my road trips for the night before heading to Pete and Jakes in Peculiar, ending up with 800 miles for dinner…. More great memories. Driving 350 miles to Fayetteville to visit friends Clem and Kim, only to call a scrap yard in Rogers, Arkansas (go Google BB Gun history) who said they have a few Astro vans, when nobody so far had even one in their junk yards……. Seriously?? Then getting there and finding a 1995 face lifted model with the right dash piece I dreamed of having….. for $20.00 -PRICELESS. https://hosting.photobucket.com/imag...080&fit=bounds Yup, the trip was different to the plan, but it was delivering like the goose laying golden eggs. Once again life was kind to me, in a curved ball kinda way. The kindness of complete strangers always amazes me. (Admittedly, I have done the same kind of thing many times before as well, but it always humbles me) While I was there in Arkansas, a member “Opelbits” from AstroSafari.com forum reached out and offered me an original steering wheel for the van, FREE for the taking, should I want it. I do not like taking stuff just because it is there, but I prefer the original to the sports steering wheel fitted. Logistics seemed a slight problem as he lived some distance on the other side of St Louis, same state as Dennis, but still a long way away…… I accepted the offer of a free steering wheel, offering to pay shipping etc. supplying him with Dennis’ address and contact number. Turns out, Tony, who had offered the wheel, likes to drive his Mustang as well, and unbeknown to me, he and Dennis agreed to him driving all the way to Dennis’ place to hand deliver the wheel……. As if that was not enough, he came with a load more stuff for Dennis and me. What Tony brought….. Treasures. https://hosting.photobucket.com/imag...080&fit=bounds TOTALLY (relatively) UNOBTAINABLE GM MAINTENANCE MANUALS. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Every possible fault, identified, cross referenced and then answered between these manuals. I cannot even describe how Dennis went on about the amazing value these three books add to owning one of these vans. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds And of course the original NON-AIRBAG steering wheel, which I love the idea of fitting back in the van. I absolutely love it, and it is an immaculate example as well. Along with repairing the dash….. What a win. https://hosting.photobucket.com/imag...080&fit=bounds One more thing he brought from his personal treasure stash ( I love this stuff) was an original steel, embossed Disabled Parking sign. I had been looking for one for Andy the welder, my repeat lodger whose wife is ex-military and disabled through service. But Andy will not be getting this sign…… I decided to give it to Dennis, as it goes much better with his replica Gas Station and the age of his collection, so we traded a newer one for the original. The one Andy will get, was left with Dennis as my baggage was on the limit, well, over and I had to swap out some stuff at departures, so it may come back next year, should I make it there with having to find a new job and start saving up vacation etc. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds So that brings us back to today, back in the U.K. I am looking forward to seeing if these parts all fit my van, and then of course fitting them all. . |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Quote:
Sorry you left the site. Forums can be a pain in the butt, as can members, moderators too. Van thread here, with full story including a 4 hour train trip to go collect. https://forum.retro-rides.org/thread...shorty-believe PS. Your mail inbox is full, so could not send a PM. Cheers Rian |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
When I was running around with Dennis, trying to find bits for the Chevelle he is building, I also looked out for anything random that would go with me, my garage or any of the cars on site.
The Astro has one of those large UK style rear fog lamps fitted. Being lowered means it will be at risk at times and also it is just not that pretty. When I built the Rezin Rockit I discovered a slim line fog light in my pile of “Maybe one day we can use it” spares, fitted it and it really is great, being narrow and out the way. So I bought a slimline (not pretty) unit for the Astro. https://hosting.photobucket.com/imag...080&fit=bounds Yesterday afternoon,I offered up the new radio surround for the dash. Realised there is a load of electronics to be disassembled, identified, made redundant or used…… So I stopped messing with that. It is a job for a longer day, possibly with a friend or two who know electronics better than me. And I need to make a plate, and find the right head unit. https://hosting.photobucket.com/imag...080&fit=bounds While out there, I also checked the new Chevy steering wheel, compared to the smaller one currently fitted. Different for sure. https://hosting.photobucket.com/imag...080&fit=bounds Today, after @pauly had been to collect his parts, I went out to see if I could get the steering wheel fitted. Errrrmmm….. NOPE ! Seems that if you give a monkey an Allen key, they will go in and screw it up. So job aborted until,I figure a way to get these stripped out heads removed. Any advice, photos, help accepted as always, on how to address these things. You will see one had a head broken off already in the second line. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Weather has tuned cooler too. Still need rain to recover what is left of my dead lawn and plants. Yup……. Ugleee. https://hosting.photobucket.com/imag...080&fit=bounds . |
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
A day in Eureka Springs, Arkansas with Clem
Quite the tourist trap. https://youtu.be/UFfqTbenCJ4?si=7_vHwnkxRTLthUWq |
All times are GMT -4. The time now is 05:27 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com