|
Re: Donz '65 SWB Stepper Budget Build...
Brilliant pics of the Kestrel Don, thank you for sharing.
That made my day yesterday. Great storming progress again. |
Re: Donz '65 SWB Stepper Budget Build...
Looking good Don!
|
Re: Donz '65 SWB Stepper Budget Build...
You and your truck will be on the road soon.
Looking Good, Keep on Truckin' |
Re: Donz '65 SWB Stepper Budget Build...
Excellent progress
|
Re: Donz '65 SWB Stepper Budget Build...
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Getting' some truck time in, so update later... Here's the temp at 2pm this afternoon in the shed...:bann: not 100F https://c3.staticflickr.com/9/8138/2...6ea3c191_z.jpgUntitled by Donald Olivo, on Flickr |
Re: Donz '65 SWB Stepper Budget Build...
We have sun shine and cool weather, the coolest in a long time for August.
My wife and went for a walk and then for a swim this after noon. The water is very cool and the water level is very high in the lake for this time of year. No complaints from me. Always good to hear you are getting in some truck time. |
Re: Donz '65 SWB Stepper Budget Build...
Forty plus days of 90s. Stupid humidity and rain almost every afternoon. Must be one of the hottest summers I can recall. It's supposed to cool down to the 80s the first part of the week and back to the 90s.
|
Re: Donz '65 SWB Stepper Budget Build...
I think you gave us the hot weather brotha...been over 100 here the past few days. Monday was around 105! lol :chevy:
|
Re: Donz '65 SWB Stepper Budget Build...
Quote:
Quote:
Quote:
|
Re: Donz '65 SWB Stepper Budget Build...
Hey Guyz...
Yesterday and part of today has been spent working on the Gas door modification...:metal: I also ordered my Fuel sender from LMC, so soon, very soon, I should be able to hop in twist the key and move this beast under it's own power...:uhmk: I started off cutting the Fuel door from the Squarebody bed I acquired...Sorry Squarebody guys!!! https://c6.staticflickr.com/9/8396/2...c0b1f10f_z.jpgUntitled by Donald Olivo, on Flickr https://c2.staticflickr.com/9/8333/2...dc5d85a0_z.jpgUntitled by Donald Olivo, on Flickr I then began the process of cleaning, repairing and installing on the Stepper's L/Stepside Fender... Here's a shot after removing the hoses and starting the cleaning process... https://c5.staticflickr.com/9/8094/2...527e4f45_z.jpgUntitled by Donald Olivo, on Flickr Found some rust that needed to be repaired... https://c4.staticflickr.com/9/8250/2...91082359_z.jpgUntitled by Donald Olivo, on Flickr Let the games begin... https://c7.staticflickr.com/9/8514/2...ca767466_z.jpgUntitled by Donald Olivo, on Flickr Patch welded in, Parts painted that could be before welding in..., and new Locking Gas Cap... https://c8.staticflickr.com/9/8473/2...20567e33_z.jpgUntitled by Donald Olivo, on Flickr Here's a closer shot of repaired area... https://c8.staticflickr.com/9/8144/2...2f6aaa50_z.jpgUntitled by Donald Olivo, on Flickr Next step... Mark and cut Fender...:uhmk: https://c1.staticflickr.com/9/8031/2...366bfa24_z.jpgUntitled by Donald Olivo, on Flickr https://c5.staticflickr.com/9/8058/2...a00ac262_z.jpgUntitled by Donald Olivo, on Flickr Forgot to get pic of hole cut in fender...:banghead: ...but, here's the Welding getting started... https://c4.staticflickr.com/9/8496/2...0f80b282_z.jpgUntitled by Donald Olivo, on Flickr https://c4.staticflickr.com/9/8221/2...c5d6fc36_z.jpgUntitled by Donald Olivo, on Flickr Still gotta grind and get back in primer, door is just set in to see what it's gonna look like... https://c8.staticflickr.com/9/8317/2...7fd7624e_z.jpgUntitled by Donald Olivo, on Flickr I know, it's opening to the rear, but on the donor, it was on the Passenger side and my tank fills on the Driver's side, so...:chevy: Spotted this one Saturday while working, shot this pic earlier today on a run into town... I think I've talked with this guy before, not sure though... https://c7.staticflickr.com/9/8405/2...69252ca2_z.jpgUntitled by Donald Olivo, on Flickr Will post more after grinding and body work finished...:metal: Laterz...:burnout: |
Re: Donz '65 SWB Stepper Budget Build...
very cool gas filler bro...
thinkin' maybe you're like me... wishing that August and Sept. had 41 days instead of 31 so we could have more done by October. Right there with you buddy... thrashin' on a deadline. I like the push but we have a lot of important distractions... make it or not, we sure will get alot done under the gun. push on my friend... |
Re: Donz '65 SWB Stepper Budget Build...
Quote:
|
Re: Donz '65 SWB Stepper Budget Build...
More truck time today...:bann:
Purchased the filler hose, vent hose, clamps and other assorted goodies this week, installed the Fuel level sender, hooked up hoses and electrics... and with the help of a friend and his 2 boys, we set the bed on... :metal: Starting to snowball towards a running driving truck...:hot::ennyd: On to the pics... https://c6.staticflickr.com/9/8428/2...8dd24e4f_c.jpgUntitled by Donald Olivo, on Flickr https://c2.staticflickr.com/9/8314/2...fe6e9e1d_c.jpgUntitled by Donald Olivo, on Flickr https://c3.staticflickr.com/9/8082/2...8cd5af42_c.jpgUntitled by Donald Olivo, on Flickr Hoses hooked up and the bed to frame ground strap installed... https://c5.staticflickr.com/8/7693/2...2260769b_c.jpgUntitled by Donald Olivo, on Flickr https://c2.staticflickr.com/9/8078/2...88679064_c.jpgUntitled by Donald Olivo, on Flickr Bed on...:metal: https://c6.staticflickr.com/9/8653/2...a3faef09_c.jpgUntitled by Donald Olivo, on Flickr https://c4.staticflickr.com/9/8155/2...a1efce83_c.jpgUntitled by Donald Olivo, on Flickrhttps://c1.staticflickr.com/9/8718/2...d268bc42_c.jpgUntitled by Donald Olivo, on Flickr https://c3.staticflickr.com/9/8235/2...d0988a5f_c.jpgUntitled by Donald Olivo, on Flickr Rockin' along...:metal::flagw: |
Re: Donz '65 SWB Stepper Budget Build...
Looks good Don. Now get all that front sheet metal on.
Bret |
Re: Donz '65 SWB Stepper Budget Build...
Bed looks great on there.
|
Re: Donz '65 SWB Stepper Budget Build...
Lookin good Don!
|
Re: Donz '65 SWB Stepper Budget Build...
That really looks sweet brotha! Diggin the progress! I'll catch up eventually. :lol: Still fighting the GMC at this point. :waah: But getting closer.
|
Re: Donz '65 SWB Stepper Budget Build...
Looks good! I think you are going to make that deadline.
|
Re: Donz '65 SWB Stepper Budget Build...
Quote:
Quote:
Quote:
Quote:
Quote:
Only one day off this week, so here's a small update, but an update nonetheless!!! A few more steps forward...;) I started the day out planning to finally bleed brakes and clutch... planning to being the key...:sumo: After getting the truck off all four wheels, I decided to tackle a few smaller jobs first... Of course, once I was in the middle of mounting and wiring the taillights... Life stepped in and delayed plans to bleed the above mentioned systems...:banghead: Once I had the Spare Tire Carrier mounted, I snapped this for Bomp's selfie thread... it'll get there eventually...:lol: https://c5.staticflickr.com/9/8385/2...0b42af76_c.jpgUntitled by Donald Olivo, on Flickr Here's the Spare mount... https://c3.staticflickr.com/9/8356/2...c28b213d_c.jpgUntitled by Donald Olivo, on Flickr https://c5.staticflickr.com/8/7479/2...45fbcb97_c.jpgUntitled by Donald Olivo, on Flickr https://c2.staticflickr.com/9/8336/2...0e1453f3_c.jpgUntitled by Donald Olivo, on Flickr I then mounted the Taillights, Tailgate, and Rear Bumper... https://c2.staticflickr.com/9/8137/2...73743801_c.jpgUntitled by Donald Olivo, on Flickr https://c4.staticflickr.com/9/8852/2...a028d845_c.jpgUntitled by Donald Olivo, on Flickr Finally, Here's a Side shot from earlier today... https://c7.staticflickr.com/8/7723/2...0aac87d8_c.jpgUntitled by Donald Olivo, on Flickr A local friend has some drop springs for the rear that I'm contemplating grabbing to drop the back a bit more...:D Still need to mount and wire the License Plate Bracket then, other than paint and bed floor, the rear will be complete...;) Laterz... |
Re: Donz '65 SWB Stepper Budget Build...
More progress! :metal:
|
Re: Donz '65 SWB Stepper Budget Build...
It was pointed out to me once long ago that without life in the way what good would these trucks be.
Then I had to drop everything and do Honey Do's. Sometimes when there is a long gap on truck time the truck time is even more rewarding. Diggin' the progress you're making even with the limited truck time. |
Re: Donz '65 SWB Stepper Budget Build...
It is coming together no matter how long it takes.
Really nice progress. |
Re: Donz '65 SWB Stepper Budget Build...
Looking great Don! Can't wait to see it rolling down the highway.
|
Re: Donz '65 SWB Stepper Budget Build...
Quote:
Quote:
Quote:
Quote:
|
Re: Donz '65 SWB Stepper Budget Build...
Great progress!! I saw your video on FB, very cool. I remember driving mine for the first time.
|
Re: Donz '65 SWB Stepper Budget Build...
It's ALIVE!!!
Spent yesterday and today bleeding clutch and brakes, hanging doors and attempting to spend some quality time with the Mrs. during my 2 days off...:uhmk: Enough of the typing... Enjoy because I sure enjoyed driving the stepper around instead of pushing it...:metal: My friend was shooting the video so there's a bit of a delay while I was coming back up the road...:ito: https://youtu.be/oZgBLftGXf0 Here's a shot from early this morning... First formation of geese heading South... https://c1.staticflickr.com/8/7798/2...2536c092_c.jpgUntitled by Donald Olivo, on Flickr And the truck waiting for some attention... https://c7.staticflickr.com/9/8045/2...5cb07d8a_c.jpgUntitled by Donald Olivo, on Flickr No pics taken through the day... Had a friend over to help with the blleding chores... but here are a few taken after the drive in the video... https://c6.staticflickr.com/9/8238/2...cb8baa59_c.jpgUntitled by Donald Olivo, on Flickr https://c4.staticflickr.com/9/8079/2...d3b72285_c.jpgUntitled by Donald Olivo, on Flickr https://c2.staticflickr.com/9/8318/2...3ee02e3f_c.jpgUntitled by Donald Olivo, on Flickr Now to address all the little details and get the front clip on as well as getting the door innards re-installed...:uhmk: |
Re: Donz '65 SWB Stepper Budget Build...
Quote:
|
Re: Donz '65 SWB Stepper Budget Build...
Quote:
Thank you for sharing the Video earlier today. I was over at Katy's place and laughed like a mad man..... She totally got it when I showed her the video. Well done!! |
Re: Donz '65 SWB Stepper Budget Build...
Congrats on the maiden voyage Don!
|
Re: Donz '65 SWB Stepper Budget Build...
Way to go!!!!!!!!!!!!!
What a thrill to see your progress. Glad to see your "Stepper" on the road again. |
Re: Donz '65 SWB Stepper Budget Build...
Saw the video, so awesome! Givin me motorvation. lol! :metal:
|
Re: Donz '65 SWB Stepper Budget Build...
Cool videos! The open headers sound great!
|
Re: Donz '65 SWB Stepper Budget Build...
Awwwwwwsome
|
Re: Donz '65 SWB Stepper Budget Build...
It's been awhile since I've visited your thread.
Nice progress. I like the taillights. |
Re: Donz '65 SWB Stepper Budget Build...
Looks like a fun first drive… too cool.
Getting close now buddy, a little sheet metal and you're there. |
Re: Donz '65 SWB Stepper Budget Build...
Glad to see your truck rolling. Awesome vid.
|
Re: Donz '65 SWB Stepper Budget Build...
Right on Brother!!! It won't be long now.
|
Re: Donz '65 SWB Stepper Budget Build...
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
|
Re: Donz '65 SWB Stepper Budget Build...
Yesterday after work I got the glass installed in the doors, and today was spent getting the doors buttoned up and the front sheetmetal on... :metal:
Thanks to a friend and his son, the sheetmetal was fairly quick and easy... For anyone who's followed along, or even just looked in, the Stepper hasn't looked this complete since the day after it arrived in my driveway in April of 2012...:bann: On to the pics... Glass installed and doors buttoned up, although I still need to instal the door checks... https://c8.staticflickr.com/9/8512/2...f01a8634_c.jpgUntitled by Donald Olivo, on Flickr https://c5.staticflickr.com/9/8143/2...570047c1_c.jpgUntitled by Donald Olivo, on Flickr I've always wanted to run these mirrors... actually one of the first purchases I made for this build...;) https://c4.staticflickr.com/9/8482/2...f74abdc0_c.jpgUntitled by Donald Olivo, on Flickr https://c6.staticflickr.com/9/8131/2...58a90385_c.jpgUntitled by Donald Olivo, on Flickr Here's a few pics taken after the front clip was re-installed... https://c5.staticflickr.com/8/7555/2...4de70cac_c.jpgUntitled by Donald Olivo, on Flickr https://c8.staticflickr.com/9/8415/2...3a83169b_c.jpgUntitled by Donald Olivo, on Flickr Really dig these hood ornaments... https://c2.staticflickr.com/9/8341/2...747455d0_c.jpgUntitled by Donald Olivo, on Flickr Front wiring and exhaust coming up... :mm: |
Re: Donz '65 SWB Stepper Budget Build...
Bring It...
|
| All times are GMT -4. The time now is 10:06 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com