Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

and lastly trying to wrap up the air ride install, Accu-Air air management (thank you Tom Angel for helping me set all this up ) with Vi-Air 480's, Lowrider Depot Air Tanks, Stinger Battery/wires/junction blocks

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

all of the wiring and plumbing around the air tanks will be nice and tidy when done, carpeted and 2 10 inch Kicker Audio subs and Amps will be included in this area also ...pretty tight in there then it will all be covered with a hinged false floor with Bed Wood and Parts wood bed !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Great progress, Mike!

Love everything about the truck.

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Looks great, Mike! Keep pluggin'!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Looking good mike..

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

That's a lot of work accomplished and it's looking sweet! Where does the exhaust dump?

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

right here in the back

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Looks Great Mike, Keep at it!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Very good progress in a short amount of time!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Very nice Mike! You guys have done a great job!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

thanks guys, not bad for working nights and weekends

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

nice progress it looks great

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Mike you and your friends are doing a great job, super nice work. One question I have is on the under dash MC, will you have a remote fill coming back to a different cover? With the interior installed and dash, how hard would it be to check the MC?...Jim

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

yes I have a remote tank that will go in the wiper cowl panels

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

The stainless exhaust bands....is that just a straight butt joint under the clamps? I like the look and fit but have never used them.......oh yeah ....i'm loading pics in 2 days of my bed fabbing...these 180* bends from thorbeck bros i'm using are killer...will want your opinion.....by the way I got tickled at a buddy of mine....called me after Good Guys and was rubber-tongued sayin "Man u know the truck u told me about...the one on the cover of Street Trucks.....holy crap that's fine!!!!...worth my ticket in to see it"........My reply...."See I told u if u have the drive anything can be accomplished....He's just an old car salesman from Arkansas!!!!..........LOL......jim

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

LOL, Awesome thank you man ! Yes we also got the badge for finalist for the "TERRIFIC TWELVE" pretty pumped about it , a garage built truck competing with $250,000 trucks !!

The exhaust clamps are clamped over flared and slid over junctions, I wanted to do it this way so I could take it off and Jet Hot Coat it later

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Sad to admit it but sometimes those garage built truck are better than the $250,000 trucks. Cloud 9 is going to give them a run at the money!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

I thought as much, but still wanted to ask, thanks...Jim

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Really looking good I have been debating that Scotts mount for my 70 and 68 project.

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

That brake setup is AWESOME, I love it !

Just want to say thank you to LMC for being a part of project Square Peg ! I ordered parts on Monday and they are setting here today !!!! THANK YOU !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Wow this is movin fast now, I better start stalking you on a daily basis again. ;)

Looks awesome :metal:

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

I'm stalking this thread like I do the UPS guy when I'm waiting for my parts �� this truck is sweet

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

i think the ups guy would rather deliver mail to a working vulcono compared to facing the wrath of a certain customer when a part of a delivery hasnt arived yet

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

LOL..here are a few misc updates

Delta Tech Hid's the same ones that are in Cloud 9

Energy Suspensions bushings

LMC correct body mount washers

Flowmaster Exhaust totally finished, Brake lines totally done, Air Ride done

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Kickin Arz Bro! Keep up the Great work!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Looking good mike.. How about pegs top:gmc2:

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Yeah that top is shiny love it ��

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Man, that's nice stuff. Have the long list of sponsors been checkin in on this deal? Whose Booth is it gonna be in? Is Momma going out there for the whole deal, since it's hers? Great work, keep pluggin'!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

KYLE...that top looks AMAZING !!!!!!!!!!!!!!!

We will be in the Painless Products booth right in the middle of Hot Rod Alley ! Yes Sarah is coming out for SEMA also , pretty excited about that she was only there for 2 days last year this year I think she is getting to come out for 4

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Kyle how about a pic of the underneath ?

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Color matched to pegs sweet interior..

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Oh yea.....LOVE IT !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

a few disaster looking pics of rear

My wiring buddy Brock Payton is also making some sub boxes to house the Kicker 10's and making floating mounts for the amps...a lot of stuff in a little area ! LOL

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Oh ya that looks nice. I can't wait to see it in person. Why don't you bring cloud 9 too so I can kill 2 birds with one stone. I love it. 20 days brother

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

If I could afford to bring both I would Energy Suspension asked me to bring it but I just don't have the extra money to pay for her ride !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

wasnt the idea to use one of them to tow the other?
i'm sure theres someone willing to lend you or donate a trailer to the cause

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Man peg is looking saweeeet. Can't wait to see it done. Also wondering what crossmember your using up front

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Its not the trailer that is the issue it is the GAS money ! LOL

Thanks man, Scott's IFS Super SLam !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

What you going to do for hood hinges? Or did I miss that?

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

They are made by Sisco's Fab, waiting for the ones we are going to use to get here now