![]() |
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
close up
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
Finished making my patch panels for where the firewall and floor meet. Need to weld these in before pulling the old floor out.
Drivers side Attachment 2044444 Passenger side Attachment 2044445 |
Re: What did you do to your truck today.The 3rd chapter
5 Attachment(s)
My wife says I have a problem .
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
I installed my new chrome bumper from Cooper Restorations today.
|
Re: What did you do to your truck today.The 3rd chapter
72C20 - Yeah, but as my wife says: At least I don't have to go from bar to bar looking for you. I know right where you are when you disappear.
KMC3420 - I would like to know more about the patch panels. I need to do this exact same repair only my truck and was looking at it over the weekend trying to come up with a plan. |
Re: What did you do to your truck today.The 3rd chapter
Removed about 3/8" of body filler on the corner of my hood only to find poorly repaired previous damage. The bondo sculptor was not very good as the corner was way different than the other side. So, I opened her up to get some of the metal back to normal. Notice the single vertical cut and how far it opened up to get the metal close to where it belongs. Any suggestions on making a (compound curve) patch panel? A patch panel would sure come in handy if any has one available.
https://i.imgur.com/qmyUUXx.jpg |
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
Finally got a spare and had the garage floor coated for her
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
New key and tumbler for old blue.
The other key could come out and be turned off with anything and occasionally didn't need a key at all. |
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Did the drip rail today SEM self leveling seam sealer tried to get the truck as level as possible but it still puddled up in the front . Roof is now in high build primer plan is to paint the white this week
|
Re: What did you do to your truck today.The 3rd chapter
5 Attachment(s)
Quote:
Template Attachment 2044795 Template Attachment 2044796 Bender Attachment 2044797 Attachment 2044798 Attachment 2044799 |
Re: What did you do to your truck today.The 3rd chapter
3 Attachment(s)
|
Re: What did you do to your truck today.The 3rd chapter
Nice forming attachment for your press!
Jim |
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
KMC3420,
Nice, thanks for that information and the photos. I think I may have everything in my shop to build one of those breaks for my press except the black iron Tee. Like I need an excuse to go to the hardware store! |
Re: What did you do to your truck today.The 3rd chapter
Thanks guys, it works pretty good for simply bending sheet metal, intended job. I often see attachments for a press (online), and gotta at least try to make the online $100 part for $10 worth of scrap metal and some welding wire.
|
Re: What did you do to your truck today.The 3rd chapter
If only the repro parts vendors would try something similar. ;)
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
disassembled the power steering gear....
cleaned and painted the case..... ready to re-assemble Attachment 2045165 |
Re: What did you do to your truck today.The 3rd chapter
Quote:
I would make 3 maybe 4 small pieces which would be easier than trying to do that complicated form all in one piece. Tack them together and work with them until you are close enough to hammer and dolly and get by with just a skim coat of filler. Make cardboard templates from the good side for a guide. Tom |
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Put the first coat of black paint on the steering wheel I'm restoring. This is my first attempt at making a part as smooth as possible before paint is applied and so far it is coming out pretty good.
|
Re: What did you do to your truck today.The 3rd chapter
4 Attachment(s)
Painted the firewall this am . Going away for the weekend but I plan on painting ths roof monday . Going with 562 off white eventhough it's not original to the truck .
Should start taking pictures with my good camera . Phone sucks |
Re: What did you do to your truck today.The 3rd chapter
Drove it across the state for the long holiday weekend. 250 miles in the 90+ degree heat, 75 mph air conditioning, and had to stop for gas twice. That's leaving home with a full tank too. So two tanks, and then a little more to get me the 250 miles.
|
Re: What did you do to your truck today.The 3rd chapter
It’s time to put the engine in my ‘71. I pulled the driveshaft and greased the Ujoints, painted the inner fenders, core support, hood hinges, etc.
Got the engine and trans lowered into place and bolted up. Got all the exhaust bolts wire brushed and found the half moon tangs the go on the exhaust bolts and cleaned them up too. New exhaust manifold gaskets, I spaced getting new heater hose so I need to go grab that. I’m sure I’ll find some more things missing but hoping to hook the wires all up and light the fire on Saturday. It’ll be fun- I got the truck with no engine so I’ve not driven it yet. |
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
In the daylight it looks like it could use a shampooing- but still well worth the price paid!
Edit- oops, put this in the wrong thread. Anyway, this is a freebie seat I got last night. |
All times are GMT -4. The time now is 04:09 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com