Re: Kabwe's aka Bam's build
 

Slick!

Re: Kabwe's aka Bam's build
 

Nice fix.
Kim

Re: Kabwe's aka Bam's build
 

You think? Well I hope so.

Thanks guys.

Re: Kabwe's aka Bam's build
 

Nice job...Jim

Re: Kabwe's aka Bam's build
 

I think you did the right thing by welding them to the frame. Keep up the nice work my little grasshopper!

Re: Kabwe's aka Bam's build
 

Thanks
Looks like someones been watching episodes of Kung fu. Little grasshopper.lol

Re: Kabwe's aka Bam's build
 

Hey Bam,
What did you do for a nut at the lower end of the spacer? I am going to have to do somthing like that on mine. By the way your truck is really looking good!!!

Re: Kabwe's aka Bam's build
 

I did decide to weld the spacers to the frame and I used a bolt to line up the spacer holes with the holes on the frame.

I thought long and hard over the lower end nut and as I saw it I only had two two choices.
1. I could use weld-in nuts on the top, or bottom of the spacer or on the top of the frame before I welded the spacer to the frame.
2. I could buy bolts long enough to go through the spacers and the frame.

I chose option 2. I still have the option of a weld-in bolt on top of the spacer if I were to change my mind.

Re: Kabwe's aka Bam's build
 

Bam do you know who makes a rear spring shakel kit for a 56 GMC? I need to move my springs in closer to the frame. Thanks Rich

Re: Kabwe's aka Bam's build
 

Every kit I've seen sells the shackles with the springs and I don't think they move the springs that much closer to the frame if at all.

I know BCToyBox relocated his springs inside the frame rails for more room. His truck is prostreet. He used the original shackles and just reversed them, putting the driver side on the passenger. I don't know if he has pics in his build page link but here it is http://67-72chevytrucks.com/vboard/s...d.php?t=432758.

I found the pic on his flickr page. He is a cool guy if you are interested just ask him. This pic is before the c-notch.
http://farm9.staticflickr.com/8179/7...6de214c9e1.jpg
http://farm9.staticflickr.com/8439/7...51a3d67ef9.jpg

Re: Kabwe's aka Bam's build
 

Thanks Bam I thought about swaping the hangers . we used to do that on the 55 cars. Rich

Re: Kabwe's aka Bam's build
 

an option to thru bolting the frame... when i boxed my frame i left widows to slide the nut in to bolt the bed rails down. i didn't like the look and figured dirt and water would get in there. i welded 2x2 angle iron clips on the outside of my frame to fasten the bed rail too. if you needed to raise the bed 2'' you could use 2x4 angle and weld them in 2 up from the frame. you can see one of the angle clips in this pic

http://i306.photobucket.com/albums/n...0405011706.jpg

Re: Kabwe's aka Bam's build
 

Bam I hate to be a pest another question. I have a 10 bolt chevy diff 308 possi from a 79 Camaro. I need to narrow the housing , Summit has the ends or do I need the c clip eliminator ends? I don't plan on raceing . just a nice crusser. Can I get any length axels from Moser? with or without c clips. I emalied them but didn't get an answer. Thanks Rich

Re: Kabwe's aka Bam's build
 

You do not need c clip eliminators. If you are going with Ford housing ends you will use a the retainer just like the ford rearends. Yes you can get any length axles you need from Mosers. My axles and housing ends are both Moser. I had bought a disk brake kit before I narrowed my rearend so I have to modify my retainers you act as the disc brake bracket also.

The retainer is on the left side.
http://farm4.staticflickr.com/3558/3...c260c1d5e8.jpg
This is the bracket/retainer I came up with.
http://farm3.staticflickr.com/2091/3...d7d414e51e.jpg
http://farm3.staticflickr.com/2184/3...1afe2384c0.jpg

Re: Kabwe's aka Bam's build
 

Thanks a bunch . That is what I needed to know. Rich

Re: Kabwe's aka Bam's build
 

Bam, very clever with the combo....Jim

Re: Kabwe's aka Bam's build
 

Bam I think you need to change the third brake light to one of these, just joking. I saw this in Sport Truck site it was on a tailgate when I saw this light first thing to come to my mind was your truck.

Re: Kabwe's aka Bam's build
 

That is a sweet lookin light.
where do they sell those.
Posted via Mobile Device

Re: Kabwe's aka Bam's build
 

Rudedude I may put one on my 55 car but not on my truck I do like the light my buddy has one on his car.
http://farm6.staticflickr.com/5136/5...56b33c8295.jpg

Fabguy you should be able to get one from most trifive venders such as Danchucks or maybe even the car and truck shop.

Re: Kabwe's aka Bam's build
 

Oh great, another nice, clean, beautiful 55 Chevy. :metal:

Re: Kabwe's aka Bam's build
 

Yeah but he sold it. I still see the car around town, but its still Donny's car the guy left it exactly the same. I also met the guy who purchased it he seems like a nice guy and very happy with his purchase.

Re: Kabwe's aka Bam's build
 

All joking aside, that is one clean 55.

Re: Kabwe's aka Bam's build
 

Two door hardtop Belair too - ugh, kills me. My Dad gave me his purchased-new one when I turned 16 - I didn't want it. I wanted a van (it was the 70's). What an idiot I was. Someday I WILL have another though. Hopefully to go with my truck.

Re: Kabwe's aka Bam's build
 

Dan you do not want to know the cars I've had and the ones that have gotten away. I will tell you one that I regret selling a 1966 GTO. I have many cars get away throughout the years my brothers were lowriders and anything they did not want to lowride they gave to me.lol My 55 210 is not for sell ever unless the bottom falls out financially and truck whenever its done will not be for sell either. If I get bored I will just rebuild them.

Re: Kabwe's aka Bam's build
 

Now THAT would be PAIN.

My Dad's was black with the red/orange over a rich cream interior. A 235 six and 3 speed overdrive because he didn't think the new V8 would be very good - ha ha.

If I could ever find THAT specific car I'd do whatever was necessary to buy it. I know the old license number too. I submitted a form to the DMV about 5 years ago but they couldn't find it. Might have been junked or just lost a cross reference.