Re: What did you do to your truck today.The 3rd chapter
 

Just put some lowering spindles on mine today! What a Pain in the neck.

Re: What did you do to your truck today.The 3rd chapter
 

Put in a stereo

Re: What did you do to your truck today.The 3rd chapter
 

Finished up the inner lower cowl repair. Got to as much bare metal as possible, had to use a little rust convertor, then hit the whole section with Eastwood Platinum Encapsulator. Hopefully that helps seal up the metal and seams/welds. Nothing like learning to weld and a lot of rust repair! At least the ugliness of lessons learned are hidden!

Re: What did you do to your truck today.The 3rd chapter
 

I'm right there with you. I recently picked up a 68 Panel with rust issues. I'm also learning to weld and started on the cowl area too! If you can weld thin rusty metal, everything else is easy, lol.

Re: What did you do to your truck today.The 3rd chapter
 

Trying to figure out what these are? They are bolted to the frame on each side near the motor mounts.

Re: What did you do to your truck today.The 3rd chapter
 

Got the truck running again. Been sitting for 8 years.

https://i.imgur.com/YZoZWab.jpg?1

No longer have room to keep it anymore. Needs a little work from sitting... Has lifter noise, needs wiring repairs, and a good cleaning up.


Still drives very nice, hate to see it go.

Re: What did you do to your truck today.The 3rd chapter
 

My guess is they are splash guards?

Re: What did you do to your truck today.The 3rd chapter
 

exhaust manifold cooling ducts . :chevy:

Re: What did you do to your truck today.The 3rd chapter
 

x2....

Re: What did you do to your truck today.The 3rd chapter
 

Is that something factory? (Assuming you weren’t joking)

This truck, despite having come to me without an engine, seems to be pretty clean and original. Even the little exhaust manifold bolt “clips” were still sitting on the cowl from when the engine was pulled (no idea why the engine came out— maybe blew up, maybe it went into something else?) The outside paint is super sun baked and faded but the interior makes me believe the 20,xxx shown on the odometer is probably only rolled over once

Re: What did you do to your truck today.The 3rd chapter
 

removed the seat, 2pt belts, and the fuel tank.

Re: What did you do to your truck today.The 3rd chapter
 

Sanded the roof going to paint in a few days roof will be off white . Now I have to back tape everything I just painted . The tape is starting to add up . Good automotive tape is outrageously priced but the regular box store stuff dont work. At least the bug decided to land in an area not seen:lol:

Re: What did you do to your truck today.The 3rd chapter
 

Reason I'm delaying the roof paint going to try and look at this truck. But it will be an overnight trip.

Re: What did you do to your truck today.The 3rd chapter
 

Did the roof today . Came out good but could be better. Going to sand it in the morning and reshoot it

Re: What did you do to your truck today.The 3rd chapter
 

Taping is a real pain in the ass

Re: What did you do to your truck today.The 3rd chapter
 

You are spraying everything outside I see. What's your paint? Acrylic enamel or bc/cc?

Re: What did you do to your truck today.The 3rd chapter
 

Yes, they are factory.

Re: What did you do to your truck today.The 3rd chapter
 

I did it under a cover it . Then moved it( the cover it) so it could bake in the sun

But my go to is single stage PPG paint for solid colors

Re: What did you do to your truck today.The 3rd chapter
 

B/C For the rest of the truck I am using a booth.

Re: What did you do to your truck today.The 3rd chapter
 

I did body and paint work 45 years ago. Things sure have changed. My favorite was acrylic enamel. It flowed out so nice and had the shine without cutting and buffing. Is AE even still available? I have not kept up with paints and supplies since I got out of it.

Re: What did you do to your truck today.The 3rd chapter
 

I have some centari acrylic paint can't get the reducer any more let alone the hardener that came out towards the end real good isocyanates. It was good in the day but the new stuff is incredible. Dries like the old lacquer and gets hard as a rock in a few hours

Re: What did you do to your truck today.The 3rd chapter
 

Reshot the roof it's acceptable now .

Re: What did you do to your truck today.The 3rd chapter
 

Top

Re: What did you do to your truck today.The 3rd chapter
 

Finished up a brake booster installation. Removed the engine harness so I could unwrap it, extend the brake sensor wire by 9" under the wrapping, and re-wrapped and installed it. Not sure I routed the sensor wire the correct way. Seems a little precarious where it is. Also painted and installed a choke delete I got from daddymoo2. It's nice to have that hole covered up.

Finished cleaning up the passenger side inner fender yesterday. Had to weld in a little patch to fix some rust at the brace. Will be doing the other side next.

Re: What did you do to your truck today.The 3rd chapter
 

Dang son!