Re: No Limit Spy Photos
Quote:
|
Re: No Limit Spy Photos
2 Attachment(s)
|
Re: No Limit Spy Photos
thx a lot for the anwers and the pics...
sounds great;) |
Re: No Limit Spy Photos
does anyone have the link to the thread where the truck is in it which is in the c10 builders guide from street trucks? i mean the pro touring chassis illustrated in that magazine?that who has the no limit suspension all around...
i find it few days ago but don t remember where it is and can t find it;( thx... |
Re: No Limit Spy Photos
Quote:
|
Re: No Limit Spy Photos
yes i saw that built thread the rear is raised 5.5 inches...
but i find a thread were that pro touring chassis from the builders guide was in and can t find it anymore... |
Re: No Limit Spy Photos
The height of mine is the same as the rear rail kit. I did raise my rails a little more but it was for how I did the sway bar and panhard bar.
|
Re: No Limit Spy Photos
Olay thx;)
|
Re: No Limit Spy Photos
Quote:
Can I ask why the offset on the rack? Why not just center the rack? I am just wondering, i was going to center mine. "If I was to install my own" Would I lose travel? |
Re: No Limit Spy Photos
You would have to put a extension on both side if you centered it. Then the steering shaft would probably be in the engine. You keep it all the way to the left for clearance.
|
Re: No Limit Spy Photos
Thanks Chris
|
Re: No Limit Spy Photos
Quote:
you have a LS adapter plate you like for this setup? |
Re: No Limit Spy Photos
How wide is it from rail to rail? How wide of a back tire can be used? I think this may be exactly what I need.
|
Re: No Limit Spy Photos
1 Attachment(s)
Attachment 1293545hey rob thats what i need for my 71 c10 lwb dedicated drag truck (no street), you us racers are all about weight and weight is King. I just dont need everything that comes in the package, like sway bars and power steering (whats that) lol. Can you sell just parts of it? And a manual rack would be nice.
|
Re: No Limit Spy Photos
And the ZG spindles seperate....mabey?
|
Re: No Limit Spy Photos
Quote:
|
Re: No Limit Spy Photos
Quote:
|
Re: No Limit Spy Photos
Thanks rob sounds like a drag setup to me, i will get w/ you after the season about this. Sub seven sec. range here i come!
|
Re: No Limit Spy Photos
Can that top mount rear sway bar be mounted while the bed is on the truck.?
Also do people do their C-notches with the bed on..? |
Re: No Limit Spy Photos
Rob,
I'm building my 72 c10 short box to lay frame. Will the rear rail kit allow me to achieve this or will I bottom out before laying out? Thanks in advance. I'm just checking my options and I really like the rear rail set-up, But It appears to not be what I will need. |
Re: No Limit Spy Photos
BigDaddyV
With the raised rail kit and a 26 inch tall tire the frame will be 1.75 inches off the ground roughly. If you put in a small c notch you could get there. What rear suspension are you thinking? Smitty |
Re: No Limit Spy Photos
If I were to go with the Rail Kit, I was gonna do the no limit Fat bar 4 link. with bags.
|
Re: No Limit Spy Photos
With bags I think you will be ok going lower you might have lower mounts a little.
|
Re: No Limit Spy Photos
I'm sure I could make it work, and I'm no stranger to Fabrication. I may go that route....
But then again, I just realized you said 26" tire.... I won't run anything smaller that 29" on the rear so it may be a problem... |
Re: No Limit Spy Photos
You could probably get to .75 of the ground with a 29 tall tire.
|
All times are GMT -4. The time now is 09:26 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com