Re: NAPCO Thread
excluding the fenders i like it....
|
Re: NAPCO Thread
I bet the pot holes felt real nice with those front leaf packs!
|
Re: NAPCO Thread
Quote:
|
Re: NAPCO Thread
3 Attachment(s)
Not sure what's up under these,but they're big GMCs:
|
Re: NAPCO Thread
2 Attachment(s)
Here are some cool old ones:
|
Re: NAPCO Thread
Dont you just love Hanks Truck Pictures Tim?
|
Re: NAPCO Thread
5 Attachment(s)
Yes. I end up there searching pictures even when I don't go straight there. Half the time I don't know I'm there until I see the name at the bottom.
i don't think these have been shown yet: |
Re: NAPCO Thread
5 Attachment(s)
Aw heck,here's another handful:
|
Re: NAPCO Thread
1 Attachment(s)
Huh?
|
Re: NAPCO Thread
Red 58-59 gmc dually. SICK!!!! I would love that with a cummins and a 5 speed.
|
Re: NAPCO Thread
lol that green and white gmc stepper has got some pizza cutters on it!!!
|
Re: NAPCO Thread
1 Attachment(s)
Glad I came across this thread. Would the BOM number have been changed if a NAPCO conversion was done on a 63 GMC suburban? Here's what it looks like.
|
Re: NAPCO Thread
I don't see why unless it was a 3/4 ton. All Suburbans that I have seen were 1/2 tons with a short wheelbase. They would have had closed knuckle Dana 44 front axles with drum brakes and either a 12 bolt or a GM corporate HO 35 drop out rear axle if it was a Chevy and a Dana 44 rear axle if it was a GMC.
|
Re: NAPCO Thread
Are you asking if the number would have been changed once the axle laded in a Suburban? If so,I don't think so. I've never seen any axle numbered specifically for the vehicle it was used in. The number pertains to the axle unit itself,only. I hope this helps.
|
Re: NAPCO Thread
Yes that's what I was wondering. I have had a time trying to just find out what year and exactly what I have. I'm trying to get brake parts such as the brake bar (thinking of making my own). I have been able to find the bearings, brake shoes. Still need one six lug drum and the right rear axle. I don't know if an after market is available? Found drums but not deep enough at the axle face area. Any help would be much appreciated.
Thanks |
Re: NAPCO Thread
Take a picture of the whole axel and post it up...we may be able to identify the axel and then you can get your parts :uhmk:
:mm::chevy::mm: |
Re: NAPCO Thread
5 Attachment(s)
Ok thanks, here's the pictures. It's a DANA 60, semifloat, 30 spline axle, six lug.
|
Re: NAPCO Thread
OK rearend..probly from a Van...I had a rear 60 years ago and was told early 70s era Chevy Van but?? don't have any facts or proff..soo...no help right :uhmk:
someone may know...:ito: |
Re: NAPCO Thread
I scored at pick a part with the brake bar from a 1966 jeep. Same number and bendix. Found six lug drums on at 1981 jeep loredo with inline six that look the same but the holes for the studs are smaller. Going back to remeasure everything.
|
Re: NAPCO Thread
no go on the drums. The center hole for the axle was to small.
|
Re: NAPCO Thread
2 Attachment(s)
I thought these were pretty cool
|
Re: NAPCO Thread
Quote:
Quote:
|
Re: NAPCO Thread
I would love to find a truck and use ALL of that vintage equipment from those pics.
|
Re: NAPCO Thread
I tried Napa for the drums but no luck. Getting to the point of wanting to change it out for a newer model that I can find parts. This Dana is 62" drum face to drum face. It's 6 lug. Do any of you guys no of any Dana's that would fit? Or maybe another solution?
Thanks |
Re: NAPCO Thread
A couple of options would be a 12 bolt from a Chevy, a Dana 44 from a GMC 4x4 or a 14 bolt semi-float from a later GM vehicle. A 2wd 14 bolt is 3" narrower than a 4x4 rear axle. Not sure about the 88-98 axle pad width right now, but could measure it for you if your interested. The semi-float 14 bolt would be the strongest, but the closest stock axle ratio would be a 3.42. Another option could be a Jeep Cherokee Chief Dana 44 since they are wider than a Wagoneer rear axle. You could consider a disc brake conversion on the Dana 60 that may solve your drum issue. Did you look on Jollys 60/66 GMC website for any info on the brakes? I looked at info on there the other day and did see the availability of the Dana 60 rear axle in your application.
|
All times are GMT -4. The time now is 01:32 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com