Re: Parting this 66
There are actually different upper brackets. They mount the same, but the "V-8" one is wider to accommodate a wider upper tank. The simplest way would probably be to just measure the inside opening of the bracket and see if it will fit over the tank you are trying to work with. There are also different lower mounts, in a different location farther forward the the larger radiator.
|
Re: Parting this 66
PM sent
|
Re: Parting this 66
Been desperately looking for original oil filter housing/canister for 305 V-6 if have one. Any suggestions? All threads on here about adapters seem worthless
|
Re: Parting this 66
1 Attachment(s)
Quote:
I need a Mount for my wiper Motor like this. Do you have some one like this ??? Thank you verry much. Greetings Nils |
Re: Parting this 66
I have a 66 and that piece is still in it. I'll check it tonight when I get home from work and make sure its good. How much fire wall around it do you need?
Jimmy |
Re: Parting this 66
Quote:
thats great. I think i need a piece of 11" inch (ca.28cm) long and 8" high. Thank you verry verry much. Greetings Nils |
Re: Parting this 66
That should not be an issue.
Jimmy |
Re: Parting this 66
Quote:
Nils |
Re: Parting this 66
Hi Jimmy,
Is the Motor Mount ok ? Do you have a picture ? Thank you verry much. Greetings Nils |
Re: Parting this 66
Mount is OK just been raining the last two days and I have not been able to get it cut out. Rain should be done this morning and will cut it out after work. Will take a pic of it when out so you can see it.
Jimmy |
Re: Parting this 66
Quote:
Ok thank you verry much. Nils |
Re: Parting this 66
2 Attachment(s)
Got it cut out. Here are a couple of pictures. $20 and what ever it takes to get it to you.
Jimmy |
Re: Parting this 66
Quote:
the Mount looks great. 20$ is ok. Is PayPal ok for paying ? Could you say me how much is Shipping costs to Germany ? Thank you verry much Nils |
Re: Parting this 66
Nils I sent you a PM to get your shipping information. Think about if you need anything else to go in the the box.
Jimmy |
Re: Parting this 66
Quote:
|
Re: Parting this 66
1 Attachment(s)
Jimmy I need a section of the windshield frame. Drivers side bottom corner outlined in tape in the picture. About 6" high and 8" wide. Thanks for the help.
|
Re: Parting this 66
Ill look to see if it is any good.
Jimmy |
Re: Parting this 66
Thanks Jimmy
|
Re: Parting this 66
Not sure what I have is much better than yours. Drip rail is rusted off of it and looks pretty pitted in about the same spot as yours.
Jimmy |
Re: Parting this 66
Thanks for checking Jimmy I guess I'll keep looking
Dale |
Re: Parting this 66
Hi and thank you in advance for fielding this. I am looking for what I believe is called a Parking brake cable clamp. It's bolted (two bolts) to the rear brake back plate were the parking brake cable goes into the back plate.
|
Re: Parting this 66
I would have to look. LMC does sell them. Call it a seal.
Jimmy |
Re: Parting this 66
thanks. Let me know. I have a 4x4 3/4 ton so don't see it in LMC or many others.
|
Re: Parting this 66
Well that changes things. What rear do you have? I thought you were looking for C-10 stuff.
Jimmy |
Re: Parting this 66
1 Attachment(s)
Les here is the pulley.
Jimmy |
All times are GMT -4. The time now is 08:46 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com