Re: 64 chevy swb on a 94 chevy caprice frame w/ lt1
Maybe for your next project you can put a 4x4 frame under the caprice???
|
Re: 64 chevy swb on a 94 chevy caprice frame w/ lt1
Quote:
Posted via Mobile Device |
Re: 64 chevy swb on a 94 chevy caprice frame w/ lt1
1 Attachment(s)
Did some work on the firewall. After a great recommendation I am going to fill the last hole where the heater was at and smooth it all out then route the lines elsewhere..
|
Re: 64 chevy swb on a 94 chevy caprice frame w/ lt1
nice work! i love my 95 roadmaster wagon. these chassis are great platforms and can do it all from hauling to hauling azz.
|
Re: 64 chevy swb on a 94 chevy caprice frame w/ lt1
Bro you're a madman. Great job
Posted via Mobile Device |
1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
Thanks madmax... I think..
I am changing the name of my build to better reflect. I think it better reflects what I am doing... |
Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
I like the new name
Quote:
|
Re: 64 chevy swb on a 94 chevy caprice frame w/ lt1
Didn't know you could do that..............
|
Re: 64 chevy swb on a 94 chevy caprice frame w/ lt1
Admin's will change it for you.
Quote:
|
Re: 64 chevy swb on a 94 chevy caprice frame w/ lt1
I don't think it stuck, I only see a couple with the new name.
|
Re: 64 chevy swb on a 94 chevy caprice frame w/ lt1
I sent a request to the webmaster. We will see what happens..
|
Re: 64 chevy swb on a 94 chevy caprice frame w/ lt1
just read ur build its close to mine a 61 sb bbw on a 74 olds cutlass supreme frame i centered back wheels first then mount cab not gonna cut frame @ front of cab but i am gonna cut front fenders to realign center leave bumpers off custom build front air dam off of reworked fenders w/ a rear roll pan & tilt front clip had this truck since i was 15 im 43 now :m6: oh yeah subscribed i wanna see how this turns out 4 u
|
Re: 64 chevy swb on a 94 chevy caprice frame w/ lt1
Quote:
Posted via Mobile Device |
Re: 64 chevy swb on a 94 chevy caprice frame w/ lt1
Great work on your truck! That's too bad on the a/c not fitting in there. But it'll be a more clean and easier install with an aftermarket kit.
|
Re: 64 chevy swb on a 94 chevy caprice frame w/ lt1
Quote:
|
Re: 64 chevy swb on a 94 chevy caprice frame w/ lt1
Quote:
Posted via Mobile Device |
Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
2 Attachment(s)
Boy, I am tired of body work already. I would rather be fab'ing up the frame... The firewall, dash and windshield area are ready for primer. All of the holes in the firewall are filled. It turned out pretty good. I hope to prime it tomorrow or the next day so I can sit the cab back down and pray it still fits.. :lol:
Painted the bottom half with POR15. So the top will be body color and the bottom will be gloss black. Not sure how that will look but it will be different... |
Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
1 Attachment(s)
Fused the clutch pedal to the caprice pedal assembly. The hole above the switches where the washers are welded on is the top mount. The caprice used the very top hole but mine is now on the side. Welded the nut on the back side and two washers for spacing.
The caprice assembly swings to the right of the column and the clutch pedal was used to swing it directly under the steering column. sweeeeetnesssss!!!:bann: |
Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
Nice firewall work! The Caprick-up, LOL, is really coming along! Gotta love those old 9C1's! My dad has used a toilet bowl (throttle body) injected 9C1 350 in his long gone 66 C-10 longbed and a fuel injected 9c1 350 in his 64 C-10 stepside. He absolutly loved the fuel injected one. And of course i still have a 88 9C1 caprice that is gonna be restored some day. For now shes a daily driver/parts runner!
|
Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
Quote:
Quote:
Quote:
The Caprick-up name came from a friend that has been following the build. Posted via Mobile Device |
Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
4 Attachment(s)
Mounted the Cab back on the frame. Almost ready to start running wiring..
|
Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
Looking Good!!!!
|
Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
1 Attachment(s)
I didn't get much done this weekend... But I did manage to sit the bed back down on the frame. It is about 1/4 of an inch low but that was planned so I can shim it into place. Measuring 5 times, cutting halfway stopping and measuring three more times seemed to have payed off.
|
Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
What caprice I don't see a caprice ;)
|
Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
Quote:
|
All times are GMT -4. The time now is 02:09 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com