Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Great progress, Mike! Im interested in the high HP road this one is taking. Are Peg's new owners happy? Can't wait for the next installment!
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Hey Mike a recommendation for a Nice Motel/Hotel close by the shop that allows dogs would be appreciated...
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Quote:
Quote:
Quote:
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
CASINO???... Yeach baby... but probably no dogs...
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
[QUOTE=67cheby;6915377]Stay tuned, this one is going to be a Blast !! Porterbuilt sent me some sneak photos last night......CANT WAIT !
Me too Wes of Injected Customs is going to KILL this Powertrain build ! So are you going to have Wes' guys at JCJ customs do your paint? |
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
[quote=bumwine;6915910]
Quote:
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Anyone have any easy methods for stripping the undercoating off the bottom of the cab ?
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
lay it down belly up poor gas over it and set it on fire
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
LOL....well that's one method !
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
I seen that coating taken off with a propane torch and a metal scraper...
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Quote:
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
i seen that done the same way , it gets realy sticky and still can catch fire or drip and stick to youre skin burning you , its realy tedious work too
its an oil product basicly bitumen so gas petroleum ir sumtin like that will desolve the final bit sticking to the metal once you stripped all you can with the torch |
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Best Thing Being Useing butane torch metal Scraper and. Good Mask Don't no what Chemical Are in Coating Been Doing it this way forever
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Quote:
Second best is a torch and scrapper... |
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
allways figured the sandblasting would just mud up the undercoating not remove it , maibe they need to heat it up with the blast to get it to let go
maibe they use a waterjet with sand that might work |
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Quote:
If you look back to page #1 of my thread, I used a twisted wire wheel in a small Dewalt grinder, and it didn't go too bad, it seemed to take it right off if you leaned into it a bit....In the tight corners I used a twisted wire brush made for a die-grinder that had the wires sticking out from the face of it, but put it in a 90-grinder....Don't skimp on the face/eye protection though, because after a while the wires start letting go! As far as I can remember I and/or my son did it in 4-5 hours, and if you look later in the build thread when it is painted, it looks stellar! |
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
i use an air chisel and finish up with 36 grit on a DA. by now most of the stuff gets rock hard and it was easier to chisel and sand. but i bet a wire wheel would work for the cleanup around the rolls and edges. .02
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Quote:
Jake |
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
I poked around and seems the oscillating multitool works best. I used one on a job to cut aluminum panels and such.
http://blog.hemmings.com/index.php/2...ating-removal/ |
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
This.....just have to be sensible with how much heat you put into the surface. A good heat gun would likely work as well. Aircraft stripper works too, but it is nasty and messy.
Quote:
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Ive tried believe it or not. easy off oven cleaner. let it sit over night then scrape it off. dosent get all of it but does get a lot. used this method on a Camaro a few years back. when I did it suggestions were to use only easy off. good luck. worth a try.
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
There's pics on the first Yeller thread of me rockin' the wire wheel on ours- worked pretty good.
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Quote:
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
5 Attachment(s)
Well me and my friend Brian busted out tear down day #2 while my wife and daughter took funny pictures of us ! LOL
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
4 Attachment(s)
I wanted to make sure the cab floor would cover the 4L80 so I found part of the trans hump here local (in the states) but the forward firewall piece came all the way from our friend Patrick Koch in Germany !! Patrick you ROCK MAN !!
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
4 Attachment(s)
Man it is really amazing how clean this cab is ! rockers and a backing plate on the drivers side and I think it will be good .....we will see after media blasting next week !
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
3 Attachment(s)
and the end result of our 4 hours of work a pile of parts ready to be Media Blasted and a cab ready for some extra hands to help lift it off the frame !
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Clem, I will have a chassis and a bunch of other parts ready for you on Sunday if you are headed this way ! Bring your trailer !
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Mike, cool update, now it's moving along, can't wait for more...Jim
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
some assembly required see manual........
curious to see if they can handle the stuff on the bottom of the truck and if they add to the overal price of having it blasted |
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Great progress...
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Following this one here and on I.G. Can't wait to see the progress! If you need a spare set of hands one weekend let me know, be glad to come down and help some!
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Quote:
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Quote:
my dually is down right now but as soon as i get my silverado wired for the trailer, i will be over there. |
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
|
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
4 Attachment(s)
Great progress this weekend, Got the longbed frame stripped and ready for Clem !
Cab off the frame and wire wheeled the whole bottom of the cab to get ready to be glass bead blasted, of course you then expose all the extra rust. Still not bad |
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
5 Attachment(s)
here is the other rust shots....for some reason the pictures came out crappy !
I never like the way the aftermarket rockers fit in the back of the door and my factory ones are good in that area thinking of doing it this way ......Any input ? good or bad idea ? |
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
5 Attachment(s)
Surgically removed all the short bed cross members for Clem , they will live again in another build !
Getting this SWB frame ready for all the Porterbuilt goodies !!!! CANT WAIT ! Pile of sheet metal ready for media blasting ! |
Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA"
What ended up working best for you on stripping the bottom of the cab? Twisted Wire, flap disc, wire brush or propane torch and a scraper.
I'm always looking for better ways to do stuff. Its looking awesome and that Clem is using the extras is a plus! |
All times are GMT -4. The time now is 06:41 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com