Re: my '64 c-10 swb project with steel floor from a '70
looking good, this mild weather is letting a lot of work get done, heater controls are nice wish mine had that set up, kinda fancy.
|
Re: my '64 c-10 swb project with steel floor from a '70
thanks flips, i didn't know there was a difference in a standard heater and the deluxe, but there is! if you want to get the setup make sure to get the heater box from under the hood with all cables!
|
Re: my '64 c-10 swb project with steel floor from a '70
Sorry the fan won't do you any good,,, at least you have a heater, when I got mine wasn't even connected, wouldn't have worked if it would have been connected.. LLOL Just a shell laying on the floor Ha Ha I've install vintage air but haven't completed the connection or the A/C as yet.. I'm thinking of reworking the lines before charging it up.. at the cost of 134A these days no need to waste $.
|
Re: my '64 c-10 swb project with steel floor from a '70
57 truckguy; ya, vintage air would be nice but out of my price range, right now!! Lol, maybe one day!!
i have yet to go talk to the guy that has two big back window long bed trucks, i have been told by the wife to want til income taxes come in! she thinks a lil like me and said take $600 with you and start with $400 for both! i'm hoping they both have ac and all the deluxe acc., that would be a score of a life time for me! i told the wife i would still like to go check them out to see what year they are and what they got! i know they are 64-66, she said (No, money talks) lol!! anyways i'll have some pictures of my bumper in the next day or two, going to go work on it the next two days if i can! depends on (weather and or wife) sometimes i dont know whats worse, lol!! j/k!! |
Re: my '64 c-10 swb project with steel floor from a '70
5 Attachment(s)
this is my next project to start on it's a 1969 roadrunner, when i get totally done with my truck!! it's my buddy's and he said he'll wait til i'm done with my truck before we start on it, it's only got 43000 miles on it, his uncle is the orginal owner, 3 dents which will be easy to get out and very lil rust mostly surface rust, 2 rust spots can be seen in the first picture kind of behind driver rear tire and on the driverside under the rear side marker area! interior, trim pieces, grille and bumpers is all in the shop covered but the headliner was left in! came with a 383 4 speed, but he has a 440 for it! he said he'll buy all the parts and i can put it together,also said his buying the parts now and until i'm done with my truck so it will go back togeher alot faster then my truck, it's one of my dream cars anyways, so i'll have fun! but anyways thought i would share this with you!!
|
Re: my '64 c-10 swb project with steel floor from a '70
3 Attachment(s)
not a real update but it is something! i got the rear bumper grinded down put a lil filler on it an some high build primer last week, just got around to getting some pictures of it! i put another coat on right before i took the pictures, i dont think i did to bad! its completely flat and you can't til there was any holes.
|
Re: my '64 c-10 swb project with steel floor from a '70
Hey it looks good to me.....
Nice to see things progressing great way to keep the pace for the new year..... |
Re: my '64 c-10 swb project with steel floor from a '70
bumper looks good to me!! nice work
|
Re: my '64 c-10 swb project with steel floor from a '70
thanks guys, from the comments!! i'm trying to stay at a steady pace so i'll get it road ready by sept! i may not have all of the body work done by then but alot of it will be! i hope, lol!! i got an extra set of wheelwell tubs for the rear that way i can tub it some this summer, i believe it will be around 4-5" wider per side! i was talking with my dad yesterday an told him what i was planning this year and when i'm done my truck will have that prostreet look, with cowl induction hood, widening the wheelwells! we we'll see what happens this year, lol!!
|
Re: my '64 c-10 swb project with steel floor from a '70
love the old mopars, i have many memories of running around with my older brother in his, he always had a roadrunner or satelite when i was young. and your doing a great job with your bumpers. keep up the good work.
|
Re: my '64 c-10 swb project with steel floor from a '70
thanks flip, i have been around muscle cars and trucks my whole life! i love them all, i cant say i hate any of them but i do have ones i favor more!! i like just about all of them from the 1930's-1970's, when a car was a car not a tin can, lol!! things back they were made better you know! my uncle had a 67 gto that would do a wheelie no problem, could be going down the road 40-50mph. and still lite the tires up and the fun part was it looked like it was all stock til you opened the hood !! fun memories, lol!! now he has a 62-63 nova that he's putting a 396 in it, it's still in pieces! he just bought it and is still getting parts from the guy as he cleans out his garage and finds it all! i'll get pictures of it this weekend if i can remember to go by there!
i haven't really done anything to my truck yet, lol! i did get some measurements my wheelwells are 11.5" stock and will be going to 15.5", and i did get my ashtray panel so i can clean and paint it to match the heater, glove box, gauge cluster,and i'll be painting the door panels too! i having a problem with what color sunvisors and armrest to get! my cab will be mostly silver with a small amount of blue, i was thinking of the gray and black armrest from classicparts.com, and to match them i would have to get the dark gray sunvisors! but i would like some input from you guys, as to what you think! i was also thinking of trying to dye the gray sunvisors blue but i dont know!! any help would be great |
Re: my '64 c-10 swb project with steel floor from a '70
nice build
|
Re: my '64 c-10 swb project with steel floor from a '70
Favorite ???? if it has wheels and an engine I love it... LOL
|
Re: my '64 c-10 swb project with steel floor from a '70
5 Attachment(s)
well i took my roll pan and bumper to where my trucks at, anyways i took some pictures! i got to raise the license box some and then cut four holes for the brackets! and then i can put them both together, i think it will look good!
|
Re: my '64 c-10 swb project with steel floor from a '70
The roll pan looks smooth!
Your "boltless" bumper looks fantastic! Really clean look to it like that. |
Re: my '64 c-10 swb project with steel floor from a '70
Nice job on the bumper. :metal: That was my original plan, until I decided to run chrome.
|
Re: my '64 c-10 swb project with steel floor from a '70
thanks guys, i'm not done with them yet! i just needed to see what it will start to look like, if you know what i mean!
|
Re: my '64 c-10 swb project with steel floor from a '70
Quote:
My problem is I tinker with stuff then set it aside when I decide I dont have everything I want or need to finish it. That is why my build thread is such a mess LOL |
Re: my '64 c-10 swb project with steel floor from a '70
bumper looks good, i think i have a.d.d or something like that, because i get started on one thing and end up on something non related completely:lol:
|
Re: my '64 c-10 swb project with steel floor from a '70
Yea well I think we all have a touch of that... LOL get frosted on one project and go to something we thing we can finish and end up spending more time on that then the orginal thing we were working... LOL the other day I was in the garage and must have started 10 or 15 things durning the day and didn't seem to get anything done... I hate days like that. Grrrrrrrrrrrrrrrrrrrrrrrrr:sumo::sumo::sumo:
|
Re: my '64 c-10 swb project with steel floor from a '70
Quote:
|
Re: my '64 c-10 swb project with steel floor from a '70
Quote:
|
Re: my '64 c-10 swb project with steel floor from a '70
Quote:
Cannot wait to see the pics. |
Re: my '64 c-10 swb project with steel floor from a '70
5 Attachment(s)
well mcmurphy sent me the part i need to fix my heater! it needed to be cut a lil bigger for the deluxe heater core, and the flat metal piece switched for the metal flap, then it got two new rivets! i got the part that bolts to the firewall cleaned and painted, i also took brass wire wheels to my heater core to clean it up too! anyways let me know what you think!! again i'm not done with it i got to get the gasket kit and get the motor/fan and some wire mesh for it still!
|
Re: my '64 c-10 swb project with steel floor from a '70
4 Attachment(s)
and a few more!!
|
Re: my '64 c-10 swb project with steel floor from a '70
Well that is definely ADD when you polish the inside of a heater >>>:lol::lol::lol:
|
Re: my '64 c-10 swb project with steel floor from a '70
That looks great Chad!
Just sorry it took 2 solid weeks to get down there to you!! I have to get a new core, or get the inlet/outlet re-braised before I can install it on the truck. Otherwise it is sitting on a shelf done. |
Re: my '64 c-10 swb project with steel floor from a '70
Hey i know a guy that tigs on alumium raditors for fun.. Put any good rad shop should be able to rebraise the inlet.. But honestly if it is 50 years old why not just get new.. Only 40 or so online. check here
http://www.car-stuff.com/store/?N=98...921+4294963075 It would cost about 1/2 that to get it brased and still be 50+ years old.. |
Re: my '64 c-10 swb project with steel floor from a '70
Quote:
|
Re: my '64 c-10 swb project with steel floor from a '70
heater box looks great, love the fact that you polished the core thats sweet:metal:
|
Re: my '64 c-10 swb project with steel floor from a '70
57truckguy, lol!!
mcmurphy, thanks again! dont worry about it, im just glad i got it! flips, thanks i think the A.D.D is from not having the truck done and having to much to doto get it do! so i'm just jumping around, lol!! |
Re: my '64 c-10 swb project with steel floor from a '70
lol, i have it bad, and i also have a ghost in the garage that keeps hiding my tools, but dont worry i will catch it.
|
Re: my '64 c-10 swb project with steel floor from a '70
Quote:
|
Re: my '64 c-10 swb project with steel floor from a '70
Nice to see your making some progress.....it's been awhile since i had a chance to stop by and see how the build was going. I have been up to my neck on my own builds. Looking good by the way......oh and wait till the kids are old enough to use your tools....then watch them all disappear...lol
|
Re: my '64 c-10 swb project with steel floor from a '70
Quote:
|
Re: my '64 c-10 swb project with steel floor from a '70
Who are you gonna call..........Ghost busters :haha:
|
Re: my '64 c-10 swb project with steel floor from a '70
Quote:
|
Re: my '64 c-10 swb project with steel floor from a '70
not a real update, just wondering! i'm looking for a chevy fleetside tailgate in really good shape, 198plus had one! and for the right price too! but i didnt have the money at the time! i do now, i put an add in the wanted section but thought i would post it here since some people dont look over there as much as they do here!! any help would be great and pictures would help! i also thought about buying a new one, but i'm wanting to save some money so i can finish my truck!!
i've been really thinking my truck wont be done this year but next year! been adding things up that i need to get it atleast running and to the point that it just needs to be painted and i really dont know right now!! the wife said when we get are tahoe paid off that we can spend more money to get my truck done, but thats not til sept.!! didnt get as much back for income taxes as we thought!! |
Re: my '64 c-10 swb project with steel floor from a '70
Quote:
|
Re: my '64 c-10 swb project with steel floor from a '70
Are you needing an original gas filler tube? I have one for a 57. They appear to be similar
Posted via Mobile Device |
All times are GMT -4. The time now is 04:21 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com