Re: Barn raising
 

Don't think you need break in oil with a roller setup.
Great job on your build, I hate to be the one to say - I think you're breaking all kinds of copyright laws by doing the lettering on your tires.
The look is cool though, I looked into maybe getting Firehawks. I think there was a large letter version discontinued.

http://www.productwiki.com/upload/im...k_indy_500.jpg


There are Eagle Nascar tires avail., not huge lettering though -

http://s.shld.net/is/image/Sears/095...sm=0.9,0.5,0,0https://www.tirebuyer.com/tireprevie...ll_386x386.jpg

Re: Barn raising
 

i have the ones pictured top

Re: Barn raising
 

Yeah, I saw the Good Year version but the were not jumbo enough for the design I had in mind. I actually purchased a "one time use" right for the logo. But since I am not marketing them and it is only for personal use and not for sale I think I am fine.

Re: Barn raising
 

I have heard the same thing that with a roller set-up regular oil is fine. I am going to run something good in it any way, I have not decided yet but it is not going to be over the counter stuff.

Re: Barn raising
 

OK here are the final brackets for the rack.

I transfered the aluminum mock up to 1/4 inch plate and plasma cut the rough shapes out, sanded them to fit and then tacked them up
http://i361.photobucket.com/albums/o...l/IMG_0683.jpg

All welded up and fit in place checking for distortion.
http://i361.photobucket.com/albums/o...l/DSC01454.jpg

It's close to the main cross member, about 1/4 inch clearance but it is not going to move. I will be getting all new grade 8 hardware for those of you who noticed the eclectic mix of bolts
http://i361.photobucket.com/albums/o...l/DSC01455.jpg

http://i361.photobucket.com/albums/o...l/DSC01456.jpg

Sand blasted and ready for powder coat. I was able to keep my OEM front cross member so I powder coated that too. I did not take a picture of them done because I only had my phone and it does not register gloss black to well.

http://i361.photobucket.com/albums/o...l/IMG_0684.jpg

Re: Barn raising
 

"one time use", maybe for a graphic, for use by a graphic artist like your Sister, but not for what you've done. You're using the graphics 4x. I'm just saying so others don't go out and do the same without knowing - copyright infringement is a serious matter, especially if you're dealing with a large corporation (e.g. Goodyear), and can lead to serious fines.

Correct me if I'm wrong, can you provide a link with the "one time use" license information?
Because heck, who wouldn't want to do the same, legally?

Re: Barn raising
 

Edit: Let me rephrase that so you don't think I'm a total ass. You cannot do that, and post it for the whole world to see.

Re: Barn raising
 

Hey Mike, Nice work on the rack mounts. You got it going your way with those. I know you had some time tied up in those. They look great!

Re: Barn raising
 

Love the Callahan auto parts reference!

Nice job on the engine. I am contemplating converting a 72 350 into a roller engine like this.

I wouldn't worry about the copyright thing at all since you're not using the name to make any money. You're also not defaming them in any way and they won't bother one guy making one set. Heck, if anything Goodyear should be paying you for free advertising!

Re: Barn raising
 

um i think you should be SELLING that rack mount system !! thats a no brainer , make you some truck money with those !!

Re: Barn raising
 

I guess the obvious question would be; what is the point of making the file of the companies logo available if not to be seen by the public? It was replicated but on only one truck. If I did the same art on a t-shirt and put the logo on the front and back of the shirt, are you are saying that I would have to buy it twice? Sure if I was going into production I would have to agree, but this is my personal truck and the tires are not for sale. Funny you never mentioned anything about the Callahan logo. In the same light if I purchase a file from itunes I am aloud to play it on my boom box at the beach for all to hear (within 50 ft), but when I play it in my store to draw people in then it is something completely different.

Trouble is then I spend all my time making parts for other guys trucks and mine never gets done:lol: I am not interested in the liability that accompanies making steering and suspension parts. When it is for my truck it is fun, when it is a job it is grueling. This truck is my therapy, I work on it to unwind from the long work week or month. I don't want to make it part of the long week.:thud: I try to post detailed pictures and step by step in case someone wants to copy my ideas, I am not at all bummed if someone develops anything from my truck on theirs. It is the best form of flattery

Re: Barn raising
 

Well stated Mike. I totally understand where you're coming from. Now, I hope you made some sketches of these mounts. I would love to do an upgrade like this in the future:)

Re: Barn raising
 

Dude, I don't have all the answers. Callahan is fictitious, Goodyear isn't. They make the file available to make money. Like "one time use" for one page on a website, or one page in a magazine. You didn't use the graphic itself at all, you re-manufactured letters, on tires which is misrepresenting the Goodyear name brand - 4x on one truck. I just know companies frown on misuse of their name branding, trademarks, copyrights etc... I didn't mention it to piss on your parade, just to let you and other know.

Re: Barn raising
 

Thanks for letting me know.

Re: Barn raising
 

I think this can be considered art, and as such is exempt from these copyright issues.

Re: Barn raising
 

The copyright discussion has come up many times over the years on many different threads. It has never gone anywhere except to piss people off with "friendly" warnings. I doubt there are a ton of people that want to make fake goodyear tires that need a warning concerning this. Copyrights do not last forever in any case. Goodyear has been around since 1898. Pretty sure their copyright protection for the name is used up (but the trademark laws would still be in effect). Every published work before 1923 is considered public domain in the US, works published before 1964 that did not have their copyrights renewed 28 years after first publication year also are in the public domain.

I don't think this falls into any intellectual property in any case. Artwork for the logo is past the copyright time frame, use of the word Goodyear would not be protected anyway (fair use laws and 1st amendment). The only other problem could be trademark, but I haven't read anything about that to make a comment on. I don't think this is any different than someone stichting a chevy logo into a seat. Unless you are selling the seats with chevy logos you don't need licensing from GM to posess it.

*edit* looked at some trademark info and I don't think this is even close to infringement because he is not making a product for selling. Not really any different than sticking a sticker on the rear window. This would probably fall under the "fair use" laws.

Re: Barn raising
 

Copyrights go extinct after a person has been dead for so many years. Goodyear is still doing business. Besides, it isn't a logo - it's a name. This is a good discussion none the less.

Re: Barn raising
 

It isn't only for the cam you still have all the bearings cam, crank, main and rod's that could score if not coated right. Better safe than sorry an extra $50 bucks more in a new engine is cheap protection.

Re: Barn raising
 

That's not exactly true either. The estate of the dead person still holds copyrights, such as Elvis, Jimi Hendrix, etc. Still ongoing lawsuits concerning several dead artists, authors, whatever. Copyright laws apply to intelectual property only, not a product or company name. Thats where trademark laws apply. Trademark infringement laws apply to companies producing fake products using a trademarked name or logo, or companies selling a product with names or logos that are a very close copy of the trademarked name or logo. The trademark remains active as long as the company continues to use it. It can expire afer 5 years of non-use, but that is not set in stone either.

Again, he is not selling a product with a trademark protected name or logo. He does not have to buy licensing for his own use. He is not advertising a product using the trademark. There are fair use laws on the books to potect the average citizen from over-zealous corporations. In fact, use of a competing trademark in advertising is encouraged by the government in order to increase the quality of the trademark holders products by having them publicly criticized. That allows toyota to bash GM and GM to bash Ford, etc.

Re: Barn raising
 

I get the same stuff with my General Lee and Warner Bros. I peeled the tag off my mattress too!

Re: Barn raising
 

It most certainly IS a LOGO, a trademarked logo...names can be logos...How about McDonalds®???

If GoodYear gave a sh!t about such a thing they would (and could) at the minimum send you a cease and decist notice barring you from further use. Some companies (say Harley-Davidson® for example) vigorously protect any and all of their logos and intellectual property (including trademarked logos). Whether or not a company has been in business since 1900-whatever means absolutely NADA. There is NOT "fair use" or "one-time" uses of corporate logos like this. You are just an individual who did this for his own uses....i don't think in any universe that GoodYear would allow you to do this if you asked nicely, or even paid them. More realistic thing is that they don't know, or this is just small potatoes. Besides, do you think they would approve of putting "GoodYear Eagle" on a tire product that isn't even a GoodYear tire?

All that said, i think your truck (and the thread) is bitc*en and you are a pretty talented dude to tackle what you have done. I envy you guys who can cut/weld and fabricate. I know how to design stuff and make stuff pretty, but for fab work i have to rely on my friends...

Tim

Re: Barn raising
 

His truck, his purchase, his tires. This has turned into a pissing match. Anymore on the subject will lead to infractions and vacations. If anything arises from using the logo it's ultimately up to him, his lawyers and goodyears lawyers to figure out if there is an issue with. I consider this subject closed and lets get back to the point of this thread a build of a sweet truck.

Josh

Re: Barn raising
 

Re: Barn raising
 

It has been a productive week but a frustrating week as the truck has been putting up a fight the whole way. I did complete the rack and pinion brackets and the steering geometry. still need to marry the Mustang shafts to the Chevy rod ends. Mustang is 14 x 1.5 mm and the Chevy is 5/8 fine thread. I was considering fabricating a sleeve that would allow the smaller rod end ball joint to fit into the larger 3/4 ton steering arm. Not sure how much of a compromise that would be to the strength of the system but the Chevy is quite a bit bigger. But it was a 3/4 ton and now it isn't.

I also got the motor mounts done and powder coated. they looked like they were going to fit perfectly when I mounted the engine, but when I mounted the tranny, it tipped the engine back about 5* and it was putting skewed pressure on the bushings. I ended up cutting them apart and re welding them so they now fit like they should.

I sand blasted the inside of the hood and it is now ready for paint, along with the inside of the fenders and the firewall. I ended up going with a good epoxy primer and then a urethane enamel that matches the original color.

I am going to have to figure out what to do about the Alternator adjustment. With short valve covers the alt can rotate fine but with tall covers the alt hits the covers and a belt will not fit on it.

Re: Barn raising
 

Thats a lot of work, lets see it.

Re: Barn raising
 

No offense to you bro but DAMN GET OFF HIS TIP!! haha I mean geez he just pointed out its for him. Now back to this great thread about a Great Truck.:metal:

Re: Barn raising
 

I decided to powder coat the pulleys and fan rather than buy the new billet ones I was contemplating. It is just getting too expensive and I can always upgrade later. I figure that it might squeak for a while until the powder wears off in the groove, but it was free and it makes quite a difference. I will post pics tomorrow when I get it all assembled. While I was at it I took the power steering pump apart and coated that too.
My garage and driveway have been converted into a make shift paint booth so there is not much to take pics of that is not covered in plastic.

Re: Barn raising
 

Obtuse much? :lol:

-
Mike, if you need any info (parts, specs, etc...) for the alternator setup, let me know man.
Got my engine fired and posted some videos. :metal:

Re: Barn raising
 

Yes I would like to see that bracket, I am still leaning toward manufacturing my own because I am running low on funds nearing the end but if you found an easy fix I am interested.

Re: Barn raising
 

Swear I seen these mounted on a truck in town.
It's been a while but remember reading you can buy used Nascar tires.
It must have been these - and I was mistaken about them being discontinued.

http://wwwdelivery.superstock.com/WI...4093-18898.jpg

Re: Barn raising
 

Sure but your tires will only last 20 laps:lol:
We had a 3/8 mile paved paved oval track here in town and there were some guys I knew that ran the track tires on the street but it got old real quick because the soft composition on the rubber made it not very practical.

Re: Barn raising
 

That is so weird, I am Barn Owl on multiple forums, some are car/truck related some are not but I keep my user name the same. This was the first forum I ever joined and I had not come up with the name Barn Owl yet. I tried to change my user name but it is too much trouble here because this forum is bigger than most and it would be a logistical nightmare for the admin staff if they made it easy. My sister in law was down for a couple of days and slept in the office and the computer got turned off so I had to re log into this forum, I must have been tired and typed in the wrong user name and it took it, huh? said the last time I logged in was back in '09. I guess everybody already knows me as Mike, so I guess I will just keep it that way. Just for further clarification this is why my build is called Barn Raising.

Re: Barn raising
 

:metal: :lol: Would be cool if just driving to a show on nice days.
Otherwise, if DD, you're going to have to pull into the pit often. :lol:

Re: Barn raising
 

What's up Barn Owl? That's funny right there.:)

Re: Barn raising
 

Yeah, funny, an alter ego.

Re: Barn raising
 

Here is a look at the freshly painted engine. I just have the water pump and pullies mocked up to get a picture of it. I used the eastwood ceramic engine paint, flowed pretty thick through the gun so rather than reducing it I just up the PSI and it sprayed fine. Came out really good and is good to 650*.

http://i361.photobucket.com/albums/o...DSC_0003-4.jpg

http://i361.photobucket.com/albums/o...DSC_0004-4.jpg

http://i361.photobucket.com/albums/o...DSC_0001-3.jpg

Re: Barn raising
 

Looks great
Posted via Mobile Device

Re: Barn raising
 

Not sure if you can tell from the picture but I sprayed the intake manifold the Eastwood aluminum engine color also. I had thought about powder coating it and had also contemplated ceramic coating, but in the end powder was not recommended and ceramic was $120- $150 depending on which shop I took it to. It was $34 for the engine paint and I already had it. We will see how it performs, but for now it looks great, and the ceramic paint glossed up like any other urethane single stage car paint.

Re: Barn raising
 

Your new engine looks great. I be you're pumped about driving this beast again! You will be soon.

Re: Barn raising
 

It's the little details that are killing me right now, All the hardware that has to be buffed or painted or bought new... I cant believe how many times I have had to go back to the parts store because I need one more bolt to finish, then I discover I need another one. I had all the bolts from the disassembly in there respective zip loc bags but a lot are not making it back onto the motor because they just are beyond restoring. Today was especially frustrating because being New Years Eve every bodies closing early.