Re: 1966 SBBW pro street
 

^^^^ Ditto ^^^^ :lol:
Posted via Mobile Device

Re: 1966 SBBW pro street
 

hello!!!!!!!:lol:

Re: 1966 SBBW pro street
 

so any updates?? a lil off subject, question have you figured if you were just gonna paint it green or do the hulk thing on the tailgate like you talked about?? i had an idea maybe do the 'no fear' eyes in green and with the words above it and below it with the hulk saying, ' don't make me angry.. you wouldn't like me when i'm angry!!! lol!!! just a thought!!

Re: 1966 SBBW pro street
 

Be sure and use the comic book Hulk tho...Nobody wants to see Bill Bixby's face on your truck...or Lou Ferrigno either for that matter haha! j/k trying to see if your there :haha:

Re: 1966 SBBW pro street
 

Okay...so i will be doing updates tomorrow we have done a ton of work on the truck lately and as always the direction or look that i was going to go for has changed. I will be leaving a stock looking gate on the truck....I like the way it looks. No murals it just doesn't seem right to do it.....lol..... We started tearing down the back end and box...the floor in the cab is well under way...The firewall should be started probaly tomorrow depending on the last of my engine mods, one little change and it cascades from there. When you move the engine back as far as we did even a air cleaner change is a issue. But i think i could reach out and change the timing as I drive it now.......My other truck got the last of the paint on the weekend and i will be posting pictures of that on the long box build page wenesday or thursday....I also messed around on my other long box today swapped out a front end.....looked at the 58 and i think i am going to toss a engine in it and fire it up....Oh and I blew the head gasket on my street dune buggy...another project i really didn't need right now .You know i never thought i would say this but....I am so trucked out...lol....ya know by now i could have down loaded the pictures already..my bad

Re: 1966 SBBW pro street
 

:lol: No sweat man. I'm glad some one's getting some thing done!

Re: 1966 SBBW pro street
 

Well it's looking more like a truck right?....
I really dig the huge rear tubs....kinda factory looking but just a bit bigger....

Re: 1966 SBBW pro street
 

This is the box sitting on a table...the mesh is not in the box.....

Re: 1966 SBBW pro street
 

with the box off the panel in the back is now finished.....so here is what most of the back will look like

Re: 1966 SBBW pro street
 

still no firewall.....yet....

Re: 1966 SBBW pro street
 

Uh oh, a mini blower? :lol: Had to sneak that in there didn't ya?

Re: 1966 SBBW pro street
 

Dude you got mad skills there.....good eye.....lol....was just seeing if anyone would catch that.....lol...i borrowed it to see how it would fit

Re: 1966 SBBW pro street
 

man, thats nice!! your getting alot done on it! i like the wheel tubs, and the bottoms of them where they look extended look good too! that sheet metal work is great, you need to borrow that blower forever, lol!!!

Re: 1966 SBBW pro street
 

The rear tubs came out awesome......they look like a big bad factory look....which i really like. I couldn't be any happier with how it came out...

Re: 1966 SBBW pro street
 

duuude nice work looks sic!!! dig the those huge tubs . and like we wouldnt notice that blower:lol:

Re: 1966 SBBW pro street
 

Sexy up front......
Buisness in the back......lol....

Re: 1966 SBBW pro street
 

Dino
Ya well you all got game....i just wanted the t-shirt.....you know the one....
"Injection is fine but i would rather be blowen "...anyyyyyhow I just was trying it out to see how it fit and I thought ya know.....the boy's might like to see how it looks on it.

Re: 1966 SBBW pro street
 

Huge progress, I need your troop on my truck, mine's taking forever...and I'm just swapping motors. :uhmk: Love the tubs and tin...mini blower is cool, but I like the duals...unless you want the extra 100 or so ponys. Great progress.
Mike

Re: 1966 SBBW pro street
 

65pickup :

I am giving it everything i have to get that prostreet truck done and yet it's still not done . The mini blower was just a try...the big block stays.....and i am waiting to find out still if i got the parts i really wanted....

Re: 1966 SBBW pro street
 

this thing is going to be amazing!

Re: 1966 SBBW pro street
 

:lol::lol::lol: YOU DA MAN KAT!!

Re: 1966 SBBW pro street
 

I forgot to add that those tubs are the Cat's Azz!

Re: 1966 SBBW pro street
 

Hey thanks man....

I got a feeling Diesel that if you were a westcoast kinda guy that between your house and my house there would be a trail of empties.......lol....thanks for the feedback....I suffer from the " Tim the tool man diease " and sometimes I get these ideas and after they are done I spend a day going what was i thinking.....

Re: 1966 SBBW pro street
 

Thanks man....I always like positive feedback....

Re: 1966 SBBW pro street
 

Dude...
You crack me up....I just want my truck nice enought to park beside yours....lol

Re: 1966 SBBW pro street
 

:lol: I'm sure you're right. I get those ideas too, and then run with them. Then a few years later it's like what was I thinking? :lol: Luckily my wife figured it out long before we got married. :waah: If I ever have plans to get up your way, I'll definitely look you up.

Re: 1966 SBBW pro street
 

On a differnt note I hope to update my project long box today later on ( I scored a few pictures of it yesturday ).....I hope to be getting it out of body shop jail tomorrow....lol....For the record neither the truck or i have been convicted of anything wrong,however mr body shop man extended the stay of the truck just because body shop guy's are like that ......no offence to the body shop dudes out there. I am not holding my breath and mr body shops nick name at my house is " Mr one more week "......

Re: 1966 SBBW pro street
 

Well i know this is my prostreet build but hey.....looky what got paint on it....

Re: 1966 SBBW pro street
 

very nice !!

Re: 1966 SBBW pro street
 

Looking good! How's it feel? :lol: Slippery when wet?

Re: 1966 SBBW pro street
 

I don't remember seeing this build. I love prostreet builds but it looks like you are blending prostreet (a look I love) with slammed (a look I don't so much like) and I am interested to see what the outcome will be.
My prostreet, a 63 swb, will sit a little lower than stock too but not as low as yours for sure. My aim is to hit 8 second times in my truck, all motor, no adders.... a tall order I know but we will see...
Very nice build... Clean and sweet.. just how they should be.

Re: 1966 SBBW pro street
 

Well thats the great thing about this place.....there are so many differnt styles and blends to choose from......I pick and choose what i like and that works for me...lol....8 seconds is moving thats for sure...you plan on doing that with 600 hp ? I still am working on my engine but it's just about ready...waiting on a few add ons...I hope to have the engine completed in a week or so.....The way the bags are set i should have 11" of lift in the rear and 7" in the front that way i can pick the height I want and then when i park it i can dump it.

Re: 1966 SBBW pro street
 

There is a lot to say about that "+" behind the 600.
The 63 is a build that I am collecting parts on and want 90% of them before I pull one wrench on the truck.
I have a 72 frame horn to graft in so I can bolt a power steering box on to the frame, no adapter needed. Not sure what tech inspection at the track would say about those adapters. ;)
Yeah, this forum has lots of different stuff going on. That is what makes it great.
The look I am going for is the 70's bracket racer look but much lower. They had those cars and trucks way too high.
As for the 8's, it's a goal, the same goal that got my 68 firebird to run a best of 9.44 at around 140, all motor.
Make 'em light, get the suspension right and they'll fly...

Re: 1966 SBBW pro street
 

updates please!!! hello:lol::lol:

Re: 1966 SBBW pro street
 

Been a little busy the last week with a few other things......but i won't be making any updates tilll maybe monday afternoon. Haven't had time to download any pictures just yet.....how about you buddy....hows your project going ?

Re: 1966 SBBW pro street
 

same i have been busy working and going to be gone for most the week, and am waiting on parts too, i did get some stuff done i posted up some pics. hope all is well brotha D

Re: 1966 SBBW pro street
 

Well good news I got the last of the big engine parts I have been waiting for so now it's game on.....so the big question is.....show the bit's and pieces?...or wait for a week or so and show the Finished Product?......hhhhmmmmmm choices..what do you think ?

Re: 1966 SBBW pro street
 

Oh the suspense! Show the pics! :lol:

Re: 1966 SBBW pro street
 

Show em......

Re: 1966 SBBW pro street
 

is a two barrel carb?:lol::lol: just a peek