![]() |
Re: 1965/73 Cheap Build Up
wow the heck my girlfriend said she was going to her mothers house.......J/k nice pic
|
Re: 1965/73 Cheap Build Up
So how much did you win.;) or did they just give you a doll. I'm saving up for a Road king. Somthing around a 89 09 91. My buddy bought one for 8.:metal:
|
Re: 1965/73 Cheap Build Up
The promoter was a big Fu*ken liar He said there was going to be a Metric Cruiser Class, and up to 3rd place $50 certificate from the Vendors, and it was supposed to be a 2 day event. NOT!!! It was a one day event, no prize, and no Metric Class. I was lucky I got a 3rd. This is the cheap Pewter mug I got along with a Fast Dates Calendar. WOOPEE!!
http://belair.smugmug.com/Motorcycle...1050371-XL.jpg I spent $192.00 for 3 nights at the RV Park in Long Beach, $50 to enter, plus food for lunch there. All under false pretences!! This show is supposed to be the biggest bike show in So Cal, and it was the 20th anniversary. It was only a 1/4 of the size it has been in past years, and everyone complained. I doubt there will be a 21st show. Thanks for letting me vent. :uhmk::waah::cuss: BTW the trophy on the right is a first place from a professionally judged Bike Show. http://belair.smugmug.com/Motorcycle...95_e5BqC-L.jpg |
Re: 1965/73 Cheap Build Up
Anyway this is what's going on in the shop. As you can see I'm really busy. I'm collecting money and have to show some results.
http://belair.smugmug.com/Other/Kust...P1050373-L.jpg Replace Carb, tune, replace rocker panel molding, and make tubular strut mounts. http://belair.smugmug.com/Other/Kust...P1050374-L.jpg Lots of stuff to do to this 57 Ranchero. I need to make it look and run good to sell. Lots of small stuff, like detail engine, ign wired, repair rot on tail gate, and lots more. http://belair.smugmug.com/Other/Kust...P1050134-L.jpg |
Re: 1965/73 Cheap Build Up
I had to stuff all my stuff in the front garage, and one of the Seca's outside.
http://belair.smugmug.com/Other/Kust...P1050369-L.jpg http://belair.smugmug.com/Other/Kust...P1050368-L.jpg |
Re: 1965/73 Cheap Build Up
I have to stop working on the 57 Sedan Delivery for a while to get caught up.
http://belair.smugmug.com/Other/Kust...P1050362-L.jpg http://belair.smugmug.com/Other/Kust...P1050363-L.jpg http://belair.smugmug.com/Other/Kust...P1050364-L.jpg There you go. See I'm too busy to work on my own truck. I hate it but the money come first. Wife rules that. :sumo::haha: |
Re: 1965/73 Cheap Build Up
I guess we'll give you a break till next friday!
|
Re: 1965/73 Cheap Build Up
Thanks Paul..:haha:
I didn't even mention about the 62 Impala frame that's done on the side of the shop. I'm waiting for the body to be painted so I can assemble that. Here it is all covered up behind the 57 Chevy's front end. http://belair.smugmug.com/Other/Kust...P1050380-L.jpg |
Re: 1965/73 Cheap Build Up
Damn your busy guy. How do you find time to look at all that porn.:lol::lol: Do you advertise or just know a lot of the right people.
|
Re: 1965/73 Cheap Build Up
Just word of mouth. :metal:
|
Re: 1965/73 Cheap Build Up
You better get busy. You'll never get around to getting your truck done. Hell I might even get mine done before you.:lol::lol:
|
Re: 1965/73 Cheap Build Up
I just started getting out there at 8am instead of 9-10am. I guess I have to work 8 hrs a day until I get cought up. :waah: I still would like to get some work done on the cab.
|
Re: 1965/73 Cheap Build Up
Your as bad as me I'm at work by 8 am. I don't think you made it out there at 8 today because at 8 you were sending me a email.:lol::lol:
|
Re: 1965/73 Cheap Build Up
It was 6:51 to be exact. And at lunch it was at 12:46. :tms:
Now it Bud Light Time. :barn: |
Re: 1965/73 Cheap Build Up
Ok I'll let it slide. I forgot about the time change it said 8 am on my end.:smoke: What's with the light thing. You know the hard stuff has no calories.
|
Re: 1965/73 Cheap Build Up
|
Re: 1965/73 Cheap Build Up
I did'nt think it did. No wonder I'm getting fat. I thought I was just getting old. I guess it just has less than beer. :smoke: :smoke:Now that does'nt have any calories. That's why it's so heathy.:lol: Although it does burn so maybe it does have calories. I think the calories come after the burning. Anyways, all I know is I'm getting fat.:smoke::lol:
|
Re: 1965/73 Cheap Build Up
Quote:
|
Re: 1965/73 Cheap Build Up
I'm only on the 190 club.:lol: Soon to be 170 club by the end of hunting season. That's the plan anyways.:sumo: I'll have to tell my fat po she's on the wrong diet.
|
Re: 1965/73 Cheap Build Up
1 Attachment(s)
Attachment 776651
Dennis, here is a trike for you to build. A GM 572 big block powers it along.. sorry about the picture but I was not able to get a better shot.. Kinda Looks like a quick change rear axle under it |
Re: 1965/73 Cheap Build Up
Those things are for clowns. Shut up, I know what your going to say. :haha::uhmk:
|
Re: 1965/73 Cheap Build Up
it was a pretty hairy clown riding(driving) it around . He had more beard than Santa Claus, , Could a been a ZZtop wannabe:lol::lol:
|
Re: 1965/73 Cheap Build Up
I found some great tips from a web site I subscribe to. I thought you guys might like it. :metal:
Paint and Body Tips from a “Pro” by Carl Brunson Here are a few things that I do around my restoration shop in Las Vegas that may or may not be useful to those of you doing your own body and paint work. Hopefully some of them will save you some time, a few dollars and get your job to turn out better. 1. Have you ever noticed how a painter can tear a piece of sandpaper in half and it's straight, almost as if it was cut? Always fold it grit side to grit side FIRST. Crease it between your thumbnail and finger and then fold it backwards and do the same, then once more grit to grit and it should tear straight. Folding grit to grit first breaks the "back" of the sandpaper. Fold it the other way first and it'Il tear where it wants to. 2. Note that a sanding block has a round "top" with less sharp corners. Put your paper on the top side for sanding reverse curves. 3. Having a sanding block for each grit of sandpaper not only saves you the time of changing sandpaper when you need a different grit, but also saves sandpaper too. Leaving the 80-grit on the 80 block gives you a chance to wear it out before you take it off. 4. The longer the block, the better the blocking. 5. Tape will stretch when taping a curve one way better than the other will. 6. You can force a cord or coated wire under rubber to lift it up for sanding and painting. Works great on the rubber around windows. 7. If tape won't stick to rubber, wipe it clean with thinner. If it still won't stick, wipe it with very thin black paint. 8. If you’re taping on fresh paint, apply the tape to your pants first and then pull it off. It won't stick as tight to the vehicle with the lint it has pulled off your pants and won't tape mark as bad. This is also good if you’re afraid it might pull paint up when you’re unmasking. 9. You can spot-paint up to a sharp body line without leaving much of a paint edge if you reverse tape. Reverse taping is done by taping half of the sticky side of the tape on the part of the car you want to protect then roll the other half up and back loosely and hold it with a few tabs of tape. This leaves only a soft edge of the sticky side of the tape and if removed while the paint is wet will leave almost no paint edge. Two-inch tape is best for this. 10. If you have a large opening to tape up, let's say you have a door off, run several lines of 2" tape sticky-side-out across it. The paper will stick to it and make a stronger, less floppy closure when you spray cover. 11. Tape down all loose masking paper. Press it down tight and tape the creases. You don't want anything flopping around while painting and dirt can hide in creases. 12. A little bit of tape folded sticky-side-out, stuffed in a socket will hold that little bitty nut in place on the end of your longest l/4" extension when you’re trying to put an emblem back on your deck lid through that 1/2" access hole the factory gave you. A little bearing grease on a washer will hold it to the socket so you can put them both on in one shot. 13. A little grease on the socket will prevent that little bitty nut and washer from becoming a rattle left inside a panel when you’re taking your car apart too. 14. Trying to mask something odd shaped or doing some touch up work in the engine compartment? Use aluminum foil to mask with. It'll crunch down to hold on almost any shape and stay there. 15. Ever need to paint something in a tight area in your engine compartment a foot away? Spray down an empty paper-towel tube held over the spot. The paint will get there and not on everything else. 16. A squirt can with lacquer thinner is a good thing. I've never been able to pour just a little bit from a one (or 5) gallon can. 17. An old 3M scratch pad with a squirt of lacquer thinner is the fastest way to clean that almost hard body filler off the spreader. 18. Those black 3M rubber spreaders will squeegee off water while color sanding and show you where you need to sand more. 19. Some rubber spreaders will bum like hell if put in your pocket after cleaning them with lacquer thinner. 20. Round toothpicks and Q-tips are paint gun cleaning tools. Never use anything metal for cleaning a paint gun. 21. Leftover paint with hardener mixed in will keep for a day or so if put in a refrigerator. The cold slows down the hardener. You might need some touch up later. 22. Cold paint runs easy. 23. Regular cornstarch mixed into a paste is one of the finest polishes. Mixed with Meguiars #5 and a little water will polish out swirls on the darkest colors. 24. Masking tape on all edges when polishing will prevent you from catching them with the polisher and ““burning through”. Hand rub the edges |
Re: 1965/73 Cheap Build Up
Here's the link for more tips. Some good $hit here.
http://hotrodhotline.com/md/html/body___paint.php |
Re: 1965/73 Cheap Build Up
Thanks for sharing the list......#4 is the best one as far as I'm concerned.:metal:
|
All times are GMT -4. The time now is 04:49 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com