![]() |
Re: What did you do to your truck today.The 3rd chapter
Fighting with raybestos rear brakes on my 72 c20 eaton h052 diff ebrake cable needed end to to cut and moved down as they installed it to far back to bolt on to backing plate
Raybestos swapped longer shorter friction material front to back resulting on my wondering why the back pad would not sit right And there new hardware kit has the spring retainer shaft to short to let the shoes move into place for drum to slide back on |
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Thought I’d finish the front end before the back end, wrong. Bow Tie emblem delayed. Doors are loaded. Next stop glass shop.
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
There's a 67 at the local Pick-N-Pull, which doesn't happen too often. I pulled the bell housing, flywheel, crossmember, clutch pedal, and the linkage parts that were still there. Someone already got the z-bar and engine bracket (it was there a week ago). I don't have immediate plans to switch to a manual transmission, but I would like to eventually.
|
Re: What did you do to your truck today.The 3rd chapter
^ Get while the gettins' good! If I was younger, I'd be cruising the yards. I got rear ended in '97, and wearing a whiplash collar at the Pick-Your-Part closest to me. I don't remember what I was looking for, but I do remember seeing a T-Type Skylark. I had bought a 4 door '82 Regal grandpa car to replace my totaled car. It was a gutless dog. I would have loved to get that turbocharged drivetrain to put in that thing! Once-in-a-lifetime chance, lost. :(
|
Re: What did you do to your truck today.The 3rd chapter
Seems like most of the Chevy trucks in the yards these days are late '90s and early '00s. I got a decent L31 Vortec engine out of a low-mileage '97 Tahoe last weekend. This '67 is only the second 67-72 I've seen in local yards in the last year or so. I saw a third one at a yard in Reno that had been in a bad wreck. A wrecking yard I visited regularly 15 years ago in Colorado Springs had a whole row of them. Those days are long gone.
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Car show today - earned a win
|
Re: What did you do to your truck today.The 3rd chapter
Congrats Ned, well deserved for sure.
|
Re: What did you do to your truck today.The 3rd chapter
Yes congrads to you. the hard work paid off. Truck looks great
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Let the Ex-Wife and daughter drive the truck to work today, so she could use it after to pick up a bed we had loaned to a family member.
After giving the Ex "tips" and then I watched it for the 1st time drive away from me.... I likely should have taken a photo incase it doesn't come back in one piece! Though the girls did look pretty cool driving the truck LOL |
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
I would have offered to pick the bed myself. I also quit using my truck a long time ago to help out people move there stuff/junk. I just won't do it. Sorry, they should rent out a U-haul truck to move their crap. I've been burned too many times on that issue. |
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Got my bed rails on yesterday!
While I took off my loops from the back, I haven't decided if I am keeping the front/middle loops (they have come in handy). I still hoping SteveStickers (eBay seller) comes up with proper Wood Grain Stickers. I have been on contact with him and he is looking for a good source to copy from. These rails aren't in the best of shape but I just haven't found any after looking for some about a year (and that aren't crazy money). The passenger side has a bit of a bend, which kind of bums me out. So I suppose I am still looking but now I could be looking for a incomplete set just to replace one rail. |
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Fixed my windshield wiper issue, and installed the Motorola Radio set in my Forestry truck.
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Picked up my first fender that I had the side marker filled in for my 67. Noticed the grease pen markings from when the fenders were bought at a swap meet in about 2005. Don't think I could get a rust and dent free set of step side fenders for $350 a pair these days. Should have the driver's side fender next week.
I plan to clean up the inside and maybe use raptor liner or something in there then work down the exterior for epoxy priming like the rest of my bed is now. |
Re: What did you do to your truck today.The 3rd chapter
5 Attachment(s)
Got a new full length exhaust system installed. I removed the old pipes and installed new mid-length headers. Drove to the muffler shop like that. Felt like a big jerk making all that noise early in the morning in my neighborhood. Replaced the old 40 series Flowmasters with 50 series Delta Flow, and now it is significantly more tame, which I find much more enjoyable to drive. Used the stock exhaust hanger locations. The tail pipes are stainless just so they'll stay looking nice. Drilled new holes for the tail pipe hangers to raise them up 1-1/2".
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
Installed windshield - last one I installed was on this truck 35 years ago.... took a minute to remember the process, but got it done without too much difficulty!
Did the rear window a week ago as well |
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
I learned to polish stainless today, I also learned how inadequate my compressor really is. With cotton and compounds everywhere that combined for the most miserable moments of my life in recent memory.
I get to do another ring soon, the factory could have assembled one of these better and I know just where to find one in my driveway:lol: Poor C20. That truck has paid dividends, I rob from it all the time and near always has what I need. Match made in heaven maybe, I should have known it was special when DMV issued the license plate that reads 400 like the engine badges:smoke: Stole the A/C blower tube from it the other day, it's like brand new. Other than that, I give, how do Power Beams last so long? |
Re: What did you do to your truck today.The 3rd chapter
Quote:
Question for you, what material is your headers made out of? They look like Hedmanns headers if I'm not mistaken. |
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Washed up nice for coffee & cars :-)
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
The headers are Hedman 62010 mid-length stainless. They fit without any issues. |
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Got the cab painted.
|
Re: What did you do to your truck today.The 3rd chapter
^^^^LOVE that green and white!
|
Re: What did you do to your truck today.The 3rd chapter
Got a little time & a little financial boost & Picked up on a 2 year stalled project on Raymond....new trans crossmember for exhaust clearance, new kickdown cable and new brake lines...may get to drive it before the snow comes again! :cool:
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Thank You and good eye
|
Re: What did you do to your truck today.The 3rd chapter
Changed out my 20 yr old glass packs for a set of Thrush Turbo #17715 2.5". I can now think and hear my stereo or talk to the wife while driving. They do have a nice rumble to them while at idle, but are oh so quite at 2500 rpm. This will be the new chapter in the truck. And hey if I want it loud I just flip the switch on the cutouts and you will know Im coming down the street.
https://i.ibb.co/kg5CCSW/IMG-1507.jpg |
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Installed my 67-72 Chevy and GMC trucks Show Panels from Undercover Innovations. Oh, and to took the time to install the stopper on either side (I had them in stock since spring time).
They look great, other than I didn't need the A/C Panel, as my dryer is no longer in the stock location (I upgraded to R-134 and it is closer to the center). So that hole is for like nothing :( |
Re: What did you do to your truck today.The 3rd chapter
5 Attachment(s)
Altitude adjustment done courtesy of new CPP lowering springs and KYB shocks.
|
Re: What did you do to your truck today.The 3rd chapter
Thats a sharp looking truck, A+++
|
Re: What did you do to your truck today.The 3rd chapter
^ Agreed! Doesn't look lowered, so nice job!
|
Re: What did you do to your truck today.The 3rd chapter
I like the look. Which springs did you used?
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Carb bushings.. it worked out pretty well, I did the six flute 3/8 reamer turned backwards in the drill trick.. saw it on YouTube. Only $25 for reamer and bushings
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
carried my 71 to the muffler shop, new exhaust all the way. Hope to here it run soon.
|
Re: What did you do to your truck today.The 3rd chapter
4 Attachment(s)
Tonight I installed the cargo lamp and finished the wing window, side window and weather strip.
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
CPP 3” front w/KYB Excel-G 344068 shocks and CPP 4” rear with KYB Excel-G 344055 shocks You could also use your stock front coils and cut one full coil off. |
Re: What did you do to your truck today.The 3rd chapter
All Chevy, great work on the truck, nice n neat looking
|
All times are GMT -4. The time now is 01:01 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com