Re: Markeb01 Build Thread
 

Washed the truck last night, and took a couple of pictures today that accentuate the new profile:

http://imagizer.imageshack.us/v2/xq90/842/dvmcw.jpg

http://imagizer.imageshack.us/v2/xq90/843/hfp5m.jpg

Re: Markeb01 Build Thread
 

This community of Great people and information is the reason my own build went from, "slap a motor in and drive," to the process it has morphed into...:mm:
Recent conversations make me think of your build, as well as many others, who relent that their truck is never really finished...:metal:
The Pic with the lights on is really cool!!! The front profile seems more complete with the Dagmars...:thumbs:

Re: Markeb01 Build Thread
 

:metal:

Re: Markeb01 Build Thread
 

I guess there must be some truth to some things never being finished. Sometime before the steering column swap, the high beam indicator light failed. It has always been a blue LED, in the upper left of the gauge cluster. The only spare color I had was red, so that was substituted. Since then I've developed a bad habit of driving around in the daylight hours with the high beams on, because the red indicator is so dark I cannot detect that it is illuminated except at night.

So rather than spending $13 plus shipping on another blue indicator, I instead rerouted the circuit from the red indicator, to the two yellow indicator lights at the bottom of the cluster. They use to blink back and forth with the wig wag lights on the rear of the truck, but those were removed a while back and the indicators were left in place, connected – to nothing.

So it was a simple process to reroute the power wire to the yellow lights. They are much brighter than the red, but nothing compared to the blue. The blue indicator was so bright I had to put a dot of black paint over the end, and the peripheral glow lit up the chrome gauge rims. I don’t think I’ll need the paint dots on the yellow indicators, but won’t know for sure until we take if for a drive after dark. It’s always something. At least this minor correction was free!

http://imagizer.imageshack.us/v2/xq90/843/ur0pz.jpg

Re: Markeb01 Build Thread
 

Problem Solved...:metal:

Re: Markeb01 Build Thread
 

Okay after much study I did find one more place to spend money! Sitting in the truck swapping the indicator lights, it occurred to me that I still have one random plastic bat handle toggle switch which controls my windshield washer pump. So after a bit of research I found a Cole Hersee pull to on, release to spring powered off switch (M-486) and have it on order:

http://imagizer.imageshack.us/v2/xq90/839/c4hr.jpg

I have one more round ball knob (new in the package) that will be mounted on this switch, and all five primary switches and cables on the dash will have matching knobs!

http://imagizer.imageshack.us/v2/xq90/843/g16gt.jpg

Re: Markeb01 Build Thread
 

Man Mark!!! And I thought I had a lot of switches on my dash!!!!! LOL!!! Nice work! Nice thing about these...errr..or..not so nice thing...is that there's always something to spend money on. :chevy:

Re: Markeb01 Build Thread
 

While not exactly truck related, my happiness factor in the garage is going up about 500%. I got a call from my garage door guy a day ahead of schedule letting me know they’d be over at 08:00 to get started installing my new doors! So I moved everything towards the nose of the garage today making sure they have room to work. The existing doors are over 36 years old and made of wood. They are cracked, swell in wet weather, and need more repairs than are practical.

Also, several years ago I backed out of the garage during lunch and broke the bottom header on one door. The horrible looking repair has held up for several years, but it's finally time for something better. Here are the before pictures:

http://imagizer.imageshack.us/v2/xq90/842/nwdz3.jpg

http://imagizer.imageshack.us/v2/xq90/842/effjh.jpg

http://imagizer.imageshack.us/v2/xq90/845/722t.jpg

The new doors are much better insulated and will have windows on the top row. I’m looking forward to leaving them uncovered and having better lighting. With the windows on the 2nd row I always wanted some covering to keep prying eyes out. Also the old doors leak dust badly and we live across from a field. A day or two inside and my truck looks as dusty as if it had been left is outside. I’m hopeful that will go away with new well sealed doors.

This upgrade will also probably inspire me to finally get the rest of the garage painted white!

Re: Markeb01 Build Thread
 

White interior to my garage followed by 8 strip lights installed along with the original two on o e side has made my garage a more pleasant place to be in after dark.

I like the high window idea in the doors.

Re: Markeb01 Build Thread
 

Security is second nature to me, being a former Marine and having seen enough bad things happen when it isn’t taken seriously. I was amazed when we bought this house. The garage windows were completely uncovered, as was the door window on the back of the garage. There wasn’t a single deadbolt on any door, and no secondary lock on the sliding glass patio door. Many of the windows had no coverings, and the people had lived here for over 20 years. All that was fixed before we slept here the first night!

Re: Markeb01 Build Thread
 

I spent the better part of the day watching my old garage doors go away, and my new ones being assembled and installed. Here are a couple of shots:

http://imagizer.imageshack.us/v2/xq90/823/l7vr.jpg

http://imagizer.imageshack.us/v2/xq90/853/9xvz.jpg

I should have taken an inside shot before putting the cars away, but I was getting very fatigued by this time. The new washer switch showed up in the mail today. After a quick exchange of female spade to ring terminals, it was also in place:

http://imagizer.imageshack.us/v2/xq90/840/dhld.jpg

Best I can tell that completes the dash controls.

Re: Markeb01 Build Thread
 

Looks like a new house, Mark. When is the house warming?

Re: Markeb01 Build Thread
 

Dash Controls...:uhmk:

I really like the Door windows up high…

Have a Great Weekend!

:flag:

Re: Markeb01 Build Thread
 

New garage doors look nice, along with the new dash knob. Like you said, I think that completes that area.

Re: Markeb01 Build Thread
 

While I’m waiting for the next truck project to reveal itself, I decided to reorganize some of the garage and do some more updating to make my life nicer when spending time out there.

Somewhat related, investing in the new garage doors highlighted how much I’ve hated a couple of other house related appointments that I’ve managed to ignore just as much as the rusty master cylinder on my truck – like the front door to our house. In the 10 years we’ve lived in this house we’ve always hated the color and chalky appearance of the front door. But since we almost never use it (we go in through the garage) it’s been largely overlooked:

http://imagizer.imageshack.us/v2/xq90/843/n7p64.jpg

http://imagizer.imageshack.us/v2/xq90/841/qha38.jpg

First thing this morning I fabricated a temporary tarp/bug shield closing the door hole to the outside. I then pulled the hinge pins and hauled the door out in the garage. It received the same prep I would perform when painting a car. Long story short it was washed with wax & grease remover numerous times along with thorough block sanding on all the flat surfaces, and intense scuffy pad activity on all the raised features. 3 coats of Rustoleum high volume gloss white industrial paint finished it off:

http://imagizer.imageshack.us/v2/xq90/820/3q3l.jpg

I can’t get over what a difference a couple of hours work can accomplish. While waiting to rehang the door, I swapped out all my old/dirty/broken totes for about 20 bucks worth of new replacements, and added printed labels to each one for easier viewing:

http://imagizer.imageshack.us/v2/xq90/855/p6h4.jpg

Re: Markeb01 Build Thread
 

Although I am impressed with you organization skills….:uhmk: I am organized in my own chaotic way...:haha:

I did make one huge mistake… I showed my better half your garage… so now when I get my Garage built (hopefully before the end of this year) she will have me attempting to mimic your system…;) I must admit, it will save me time when searching for some seldom used item that becomes invaluable when needed…but unable to find...:mm:

An additional confession is… most of my spare bits and pieces come from my inability to find something and a subsequent trip to the appropriate store for a replacement…only to later run across the recently replaced bit lurking in the place it was stashed, "so I can find it when needed…":dohh:

Great Work Mark!!!

Happy Father's Day!!!:mm:

Re: Markeb01 Build Thread
 

Thanks Don, and Happy Father’s Day to you too!

I guess I can say I gained my organization skills naturally. My dad came from the coffee can and cardboard box generation. He did hang his hand tools on pegboard, but everything else went in coffee cans and boxes and trying to find anything required dumping them out on the floor and going through the mess (and then cleaning it all back up).

At some point I was introduced to a guy that put all his bits and pieces in baby food jars and screwed the lids under shelves. Man what an improvement that was. I used that system up until the mid-70’s when they changed the lids on the baby food jars. Since the 1950’s the lids had 3 formed “fingers” that directly gripped the threads on the jar. In the 70’s they changed to a rubber seal around the edge of the lid. This may have sealed the baby food more effectively, but for hanging jars of nuts and bolts they tended to fall off routinely breaking the jars and scattering stuff all over.

In the late 70’s I got tired of doing exactly what you described – running to the store to replace things I knew I had. So the first thing I did was start getting rid of all the stuff I knew I’d never use. I had some really cool stuff like all new chromed doo dads for a 1950 Oldsmobile, louvers for a 67 Chevelle SS hood, etc. I took all that stuff to swap meets and cleaned out a bunch of stuff I never missed. With that much less clutter to go through finding items became much easier. Eventually totes and small drawer racks came along and I upgraded to the system I use today.

My dad on the other hand never changed. When he passed I inherited his tools. Most were found on a “bench” inside an enclosed porch on the side of their mobile home. 40 feet long, 5 feet front to back, and at least 18” deep with “stuff”. In total, he had something like 11 socket partial sets (representative off how all the tools were stored. Whenever he’d lose one, he’d just buy another set. After days of scouring through all the debris, all the sets were restored to completeness. The pieces were all in the pile, just impossible to find when needed.

My weakness is that I’m basically lazy, and I don’t like working that hard over trifles. I prefer investing my time in something I enjoy doing!

Re: Markeb01 Build Thread
 

Okay here’s a question for anybody with an opinion. Now that I have bumper bullets:

http://imagizer.imageshack.us/v2/xq90/842/dvmcw.jpg

I’m wondering if I did the best I could. I’m reminded of the old adage “if some is good, more is better, and too much is just right”. I think this applied to – motor mounts and maybe a few other things. :lol:

So now I’m thinking about the subject again and considering if I should move things up a notch, like either 1956 Cadillac bumperettes:

http://imagizer.imageshack.us/v2/xq90/823/bxlyy.jpg

Or perhaps 1957-59 GMC bumper guards with bullet tips added:

http://imagizer.imageshack.us/v2/xq90/843/4k64t.jpg

Like this guy did on his Caddy bumpers:

http://imagizer.imageshack.us/v2/xq90/856/pfhn.jpg

Thoughts? More is better, or perhaps the whole concept is stupid and I should go back to stock?

Re: Markeb01 Build Thread
 

I personally like them the way you have them... They are your idea and design:metal:

Re: Markeb01 Build Thread
 

I love chrome...... loads of it.

Therein is the clue.

You have built a set, painted etc, but it will ultimately be your ride, your way.

Re: Markeb01 Build Thread
 

i like the way you have it now ..but the chrome does look cool too

Re: Markeb01 Build Thread
 

It looks like I may have created a monster. Now that the front of the house looks nicer, I had to repaint the ugly entry door from the garage to the house. Obviously I didn’t think much of the putrid old color as the latest picture I could find of it was taken about 5 years ago:

http://imagizer.imageshack.us/v2/xq90/856/nkpr.jpg

Here’s the new look with 3 coats of white gloss Rustoleum:

http://imagizer.imageshack.us/v2/xq90/841/nbvau.jpg

Of course that made the old wooden back entry door look so crappy it’s being replaced with a nice metal version.

All this activity got me inspired to relocate my Giant Gila Monster diorama to the center of the front wall for better access and viewing, while moving the TV over to the corner so I can now watch it with the hood open while I’m working on the truck. The fun ever ends!

http://imagizer.imageshack.us/v2/xq90/855/0uht.jpg

http://imagizer.imageshack.us/v2/xq90/856/xjs1.jpg

Re: Markeb01 Build Thread
 

The Man Cave continues to improve!!! :metal:

Happy Father's Day Sir!!! :flag:

Re: Markeb01 Build Thread
 

Happy Father's Day Mark! :metal: And the garage looks good to! Personally I like the bumper bullets the way you have them now...but yer truck man! Do what ya want with it. :chevy:

Re: Markeb01 Build Thread
 

Thanks guys, and happy Father's Day to all the other dads on here. I think I'm going to leave the bumper bullets alone, at least for now. I like how they turned out and I really prefer the white front end over chroming. I do love chrome and I think the main grille looks great in plating, but I can't afford it, an once plated I can't do any touch ups.