Re: What did you do with your truck today, Part 3
that's the kind of note my wife would leave - only it would say to use the sink in the garage. and take off my dirty clothes ….
|
Re: What did you do with your truck today, Part 3
Quote:
|
Re: What did you do with your truck today, Part 3
ive owned my truck for a long time and I forget how much it means to me and how it can affect my mood. ive been busy rebuilding the suspension and brakes on my daily driver and haven't really driven the truck in a couple of weeks. I mean I took it around the block but that's it. tonight I was in the garage cleaning up the mess I made and the truck just called me. I fired it up and cleaned while it warmed up. I figured I would take it around the block. I got in the truck and went around the block and when I got back to my street I kept going. I went around the whole neighborhood. got back to my street and again kept going. I pulled out of the neighborhood and took off. it turned into an hour long night time drive. I enjoyed it thoroughly. my truck runs well, sounds awesome, and make my heart smile when I drive it. it was some gearhead therapy that I really needed. I advise you all to do the same.
|
Re: What did you do with your truck today, Part 3
Quote:
|
Re: What did you do with your truck today, Part 3
2 Attachment(s)
Got a little bit done on the underside of the floor. Got my heater out of the shed and fired that baby up, that made a HELL OF A DIFFERENCE out there, oh yeah.
Brian |
Re: What did you do with your truck today, Part 3
Filled my system with coolant. Will the head plug leak? Time will tell, but I'm not optimistic. It's bitten me too many times now.
Crawled around on the garage floor enclosing my rear wiring with split loom tubing. Got it half done, will finish tomorrow. Sure would be easier to do this standing up under a lift. Man, it's cold and the days are short. After my morning chores I only have a couple of hours a day to work on the truck before it gets dark. |
Re: What did you do with your truck today, Part 3
Hope things go good for you on that damn leak.
Brian |
Re: What did you do with your truck today, Part 3
Quote:
|
Re: What did you do with your truck today, Part 3
Got nothing done in the garage last night. Instead I took off for my friends house out of town up in the hills to say goodbye. He has a few days left before he leaves this earth for a better place, he has been in such pain for a few years now. I had a beautiful time with the family talking about memories I have of him, and hearing theirs. I left very late last night driving down the windy little road with a heavy heart. Wow, every day here is a blessing.
Brian |
Re: What did you do with your truck today, Part 3
I got full coverage insurance on the '56.
Have I recently mentioned how much I hate block sanding??? Yes ogre, I am starting to get Popeye syndrome in my right arm! Jim |
Re: What did you do with your truck today, Part 3
Quote:
|
Re: What did you do with your truck today, Part 3
Quote:
Brian |
Re: What did you do with your truck today, Part 3
Little bit of stripping on the underside of the floor, that's it. :D
Brian |
Re: What did you do with your truck today, Part 3
I think a lot of guys work on their truck through the winter. they have a lot of down time and its to cold to be to far away from a heat source. I have a motorcycle that I will be working on this winter which will take a lot of my time. I spent a few minutes yesterday writing out a list of things that needed to be done to each of my vehicles in the next coming months. the truck list wasn't terrible. luckily with the truck running and driving as well as it does the urgency to get it moving isn't there. that makes working on it a lot more enjoyable. the largest thing I need to do is weld in a patch panel on the firewall to finish up my heater install. once that's done the majority of the work will be in the cab on interior systems. im pretty excited about that. its been in the 20s most of the week and I hate it. stupid cold weather.
|
Re: What did you do with your truck today, Part 3
I got a little more done on my floor underside, it's looking good. Hope I can get it primed this weekend. I know one thing, that little heater is working awesome. I don't even leave it on, working hard gets you heated up too. So I hit the heater as I am getting ready, shut it off and go to work.
Brian |
Re: What did you do with your truck today, Part 3
its COLD so of course im driving my truck with no heat and a hole in the firewall. love the death rattle.
|
Re: What did you do with your truck today, Part 3
Quote:
On another note propane Does need ventilation to operate safely. I have had problems with them and kerosene heaters and no use one of those electric Parabolic Dish heaters which works great and no fumes. |
Re: What did you do with your truck today, Part 3
Went out last night to see a fellow car nut/rockabilly band drummer play in a local historical little place, it was very cool. Marcus will buy ONLY cars with history, some award winning show car or something and restore them and sell them. One recently ended up being bought back by the original builder who after seeing it all nice and mechanically sound ended up buying it back!
Today, went out to work on the floor, man, I put an hour into it and you can barely see what I have done. But it's coming close, just super mind blowing detail stuff to get in all the nooks and crannies. Brian https://scontent-sjc3-1.xx.fbcdn.net...71&oe=5CADE104 |
Re: What did you do with your truck today, Part 3
1 Attachment(s)
Wire, sort, group, regroup, pull, push
|
Re: What did you do with your truck today, Part 3
1 Attachment(s)
Getting closer
|
Re: What did you do with your truck today, Part 3
3 Attachment(s)
Quote:
I finally got the underside of the floor ready to prime! WHOOOO HOOOO! OMG was it a bunch of work, why in the hell do we have these "hobbies" anyway? I mean, we might as well make digging swimming pools with a shovel for a hobby! Wow, this kicked my butt. After going through about 30 different discs cleaning it up I found myself needing to finish it off with the sandblaster in those areas that a wheel couldn't get into. I draped a tarp over the front taping it (and bolting it) to the cab and then got under it to blast, oh what a joy. Anyway, got it done, then masked it up ready to go WHOO HOOO! Of course I had a few welds to go, geeez, then it was ready to go! Brian |
Re: What did you do with your truck today, Part 3
Lol orange wire is supposed to go to 3rd bake light........ Not sure if it will get used or not
|
Re: What did you do with your truck today, Part 3
Quote:
Brian |
Re: What did you do with your truck today, Part 3
Quote:
|
Re: What did you do with your truck today, Part 3
Quote:
Like Martin says, why do we do this to ourselves? |
Re: What did you do with your truck today, Part 3
Well I got the doghouse on, and wire and installed the headlights and turn signals, and started wet sanding the fenders.
https://c1.staticflickr.com/5/4837/4...7f91e5aa_c.jpg https://c1.staticflickr.com/5/4824/4...85973264_c.jpg |
Re: What did you do with your truck today, Part 3
^^^^^^^^^^^^^
That is a beautiful ride you have. |
Re: What did you do with your truck today, Part 3
Very Nice combination with the "smoothness" of the top of the engine against the perfect firewall!!!!
|
Re: What did you do with your truck today, Part 3
Thanks guys. Not sure if I'm going to keep those headlight bezels body color. Those are the originals. I went ahead and painted them to see if I like it knowing I could easily add chrome ones later. But I'm starting to like it. Once I add the bumper I will decide.
|
Re: What did you do with your truck today, Part 3
I kinda like them body color. it will look different with the bumper on too though.
nice work, as per the usual. some great ideas too. |
Re: What did you do with your truck today, Part 3
Quote:
|
Re: What did you do with your truck today, Part 3
yeah, me too. I may paint the trim some sorta crisp white and see if I like it. mine is a 57 gmc so that would be a lot of chrome out front.
not even CLOSE to that point yet. |
Re: What did you do with your truck today, Part 3
Quote:
|
Re: What did you do with your truck today, Part 3
Quote:
Brian |
Re: What did you do with your truck today, Part 3
Quote:
Jim |
Re: What did you do with your truck today, Part 3
Quote:
Quote:
Quote:
Well the truck is green I think I’m going to name it envy.Then again that kind of sounds arrogant. So I think not |
Re: What did you do with your truck today, Part 3
Quote:
Quote:
|
Re: What did you do with your truck today, Part 3
Quote:
|
Re: What did you do with your truck today, Part 3
Quote:
Brian |
Re: What did you do with your truck today, Part 3
Today I managed to get my 5 minutes in the shop. Was able to stretch it out to 2hrs and 45 minutes. Yahoo. Working on finned aluminium valve covers to replace the chromed steel ones.
|
All times are GMT -4. The time now is 07:19 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com