![]() |
Re: My 50 roadster pickup build
Quote:
|
Re: My 50 roadster pickup build
3 Attachment(s)
Not a lot to show today, but my back says it was a lot of work. Got the cowl wet sanded with 2000 paper today, took about 6 times, but looks good.
You can see how dull looking it is when shot straight on, but when it has a little angle you can see how it shines already with just the 2000 paper. Hope to do around the windshield tomorrow...Jim |
Re: My 50 roadster pickup build
2 Attachment(s)
Finished up wet sanding with 2000 paper around the windshield area.
1st pic half done 2nd pic all done Maybe a day or two before update...Jim |
Re: My 50 roadster pickup build
You can really see the difference in the half done picture. Looks good!
|
Re: My 50 roadster pickup build
Quote:
|
Re: My 50 roadster pickup build
4 Attachment(s)
Was able to get back in the shop today. With Mark's help, we wet sanded with 3000 and 5000 today. Then Mark did his 3 step cut and buff. It came out super. I am really pleased with how it matched.
Pic 1 Mark doing the cut and buff. Pic 2 Overall view of how it looks. Pic 3 & 4 Tried to get close up of old and new paint were it had been taped. It is really hard to see the difference. Old paint is 15 yrs old, a little polish, and it should blend in perfect. I'm so glad it matched...Jim |
Re: My 50 roadster pickup build
Looking great Jim!
|
Re: My 50 roadster pickup build
1 Attachment(s)
here is a shot I took to see it outside.
|
Re: My 50 roadster pickup build
good googly moogly thats just gorgeous
|
Re: My 50 roadster pickup build
Quote:
Quote:
|
Re: My 50 roadster pickup build
Well done! You guys do fantastic work.
|
Re: My 50 roadster pickup build
Very nice...lotta work ‘cause of a careless deer.
|
Re: My 50 roadster pickup build
Looks amazing!
|
Re: My 50 roadster pickup build
jim...how did you mask the window gasket to ensure no paint got on it and the window frame doesn't have a tape line?
thanks, roger |
Re: My 50 roadster pickup build
Quote:
Quote:
Quote:
|
Re: My 50 roadster pickup build
Quote:
Hope this answered your question...Jim |
Re: My 50 roadster pickup build
Looks great Jim!!!
|
Re: My 50 roadster pickup build
It looks a mile deep Jim! Nice job
|
Re: My 50 roadster pickup build
Quote:
Quote:
|
Re: My 50 roadster pickup build
Jim, I think if anything your truck will look better than before! That is something I didn't think was Possible. Mark has done a fantastic job painting and your " Sanding" is over the Top
|
Re: My 50 roadster pickup build
Quote:
|
Re: My 50 roadster pickup build
Roger, I don't have a window gasket, it is glued in place, and new "T" shaped seal will be installed. If you go back to Page 60 it shows what I'm talking about.
Hope this answered your question...Jim doh!!! now I remember seeing that. sorry for being so dense. thanks. roger |
Re: My 50 roadster pickup build
Quote:
|
Re: My 50 roadster pickup build
Before I begin this message, I assure you that I haven't been stiffing to many paint fumes.
To the married guys (and even if not married), you know how every so often, the wife says, I think we need to paint the kitchen, or dinning room or living room. Or the drapes are old and need to be changed. Well us guys sort of do the same thing, but it's, new wheels, different exhaust, etc. So what I'm leading up to is, I've been wanting to change the gauges in my truck for several years, because of the newer tech stuff, you know GPS speedo, better looking and more accurate. So while I had my interior out I changed them. So now I will give an update on that...Jim |
Re: My 50 roadster pickup build
4 Attachment(s)
1st pic is of the old Classic Instrument gauges, they worked great, but were outdated.
2nd pic is getting them out of dash. 3rd pic is the new Speedhut gauges. Mark has installed about 5 sets of these in different projects, and the owners were very pleased. I also installed a set in my friend Ed's oldsmobile. 4th pic is the new gauges in place. Now this wasn't a remove old gauge and install new to the existing wires, no they had to come out and new system from Speedhut installed. Mark was very helpful helping with all the new stuff (thanks son). |
All times are GMT -4. The time now is 09:00 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com