The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   1967 - 1972 Chevy/GMC Suburbans and PanelsProjects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=212)
-   -   1969 SuperBurb build-up (Bagged and Blown!) (https://67-72chevytrucks.com/vboard/showthread.php?t=200387)

Palf70Step 10-28-2016 11:32 AM

Re: 1969 SuperBurb build-up (Bagged and Blown!)
 
:clap::clap::clap::clap::clap::clap:

Bet that5 felt good after all theses years backing it out on its own power. The ole olive burb sure has grown up!:metal:

Hart_Rod 10-28-2016 01:12 PM

Re: 1969 SuperBurb build-up (Bagged and Blown!)
 
Quote:

Originally Posted by Palf70Step (Post 7754619)
:clap::clap::clap::clap::clap::clap:

Bet that5 felt good after all theses years backing it out on its own power. The ole olive burb sure has grown up!:metal:

It did Bill! It was a long time coming...:D. Next year might finally be here....:lol:.

laidoutchevitos 10-29-2016 02:25 PM

Re: 1969 SuperBurb build-up (Bagged and Blown!)
 
Dang. That sounds NICE. 👍 and looks sharp

3drburb 11-02-2016 12:21 PM

Re: 1969 SuperBurb build-up (Bagged and Blown!)
 
Congrats on getting it running and sunbathing. Man that is one sweet ride!

Hart_Rod 11-02-2016 12:51 PM

Re: 1969 SuperBurb build-up (Bagged and Blown!)
 
5 Attachment(s)
Quote:

Originally Posted by laidoutchevitos (Post 7755406)
Dang. That sounds NICE. �� and looks sharp

Quote:

Originally Posted by 3drburb (Post 7758701)
Congrats on getting it running and sunbathing. Man that is one sweet ride!

Thanks guys! Not much progress on the Suburban this week as I've been trying to get my shop finished up. Insulation and sheet rocking should by done by the end of the week, finish the trim this weekend, then paint everything this Monday....:metal:.

Advanced Design 11-02-2016 01:47 PM

Re: 1969 SuperBurb build-up (Bagged and Blown!)
 
That looks good. Did you do the sheet rock and mudding?

Hart_Rod 11-02-2016 01:51 PM

Re: 1969 SuperBurb build-up (Bagged and Blown!)
 
Quote:

Originally Posted by Advanced Design (Post 7758766)
That looks good. Did you do the sheet rock and mudding?

Nope, I left that to the professionals....:lol:.

Dieselwrencher 11-02-2016 04:40 PM

Re: 1969 SuperBurb build-up (Bagged and Blown!)
 
Quote:

Originally Posted by Hart_Rod (Post 7758771)
Nope, I left that to the professionals....:lol:.

I don't blame you one bit! They can do it so fast!

04ls1gto 11-02-2016 07:57 PM

Re: 1969 SuperBurb build-up (Bagged and Blown!)
 
Garage looks good

Hart_Rod 11-03-2016 12:17 PM

Re: 1969 SuperBurb build-up (Bagged and Blown!)
 
Quote:

Originally Posted by Dieselwrencher (Post 7758877)
I don't blame you one bit! They can do it so fast!

:metal:

Quote:

Originally Posted by 04ls1gto (Post 7759023)
Garage looks good

Thanks! I'm excited to get it finished and start moving in again, :lol:.

Hart_Rod 11-14-2016 10:40 AM

Re: 1969 SuperBurb build-up (Bagged and Blown!)
 
5 Attachment(s)
I'm still working on getting my shop put back together. All the painting is done but I need to reinstall my lights and assorted components. I had Friday off (God Bless all of our Military and Veterans!) so I took the suburban and had the exhaust installed. It was a tight fit, but it came out well and sounds good. Pics and video!

https://www.instagram.com/p/BMt2yalBmzk/

knomadd 11-14-2016 11:41 AM

Re: 1969 SuperBurb build-up (Bagged and Blown!)
 
Looks and sounds good!! I see you have a cruise control on your turn signal switch. Did you get it hooked up and working, or have you not tested it yet (I assume not)? Sorry if I missed it, but is it the factory GM cruise through your ECM or are you using an aftermarket kit like Dakota Digital?

Hart_Rod 11-14-2016 12:22 PM

Re: 1969 SuperBurb build-up (Bagged and Blown!)
 
Quote:

Originally Posted by knomadd (Post 7768176)
Looks and sounds good!! I see you have a cruise control on your turn signal switch. Did you get it hooked up and working, or have you not tested it yet (I assume not)? Sorry if I missed it, but is it the factory GM cruise through your ECM or are you using an aftermarket kit like Dakota Digital?

Thanks! My motor is a GEN III, so I was able to wire it into the tach module using a Dakota Digital HND-3 CC handle. Isn't your a Gen IV? If so, you will have to go with an aftermarket setup.

knomadd 11-14-2016 05:28 PM

Re: 1969 SuperBurb build-up (Bagged and Blown!)
 
Quote:

Originally Posted by Hart_Rod (Post 7768217)
Thanks! My motor is a GEN III, so I was able to wire it into the tach module using a Dakota Digital HND-3 CC handle. Isn't your a Gen IV? If so, you will have to go with an aftermarket setup.

You are correct, it is a gen IV. Too bad I'll have to go aftermarket, but at least I can wait on that. Thanks for the heads up.

Palf70Step 11-14-2016 06:51 PM

Re: 1969 SuperBurb build-up (Bagged and Blown!)
 
Burb looks and sounds good rob. What mufflers you end up with on it?

Hart_Rod 11-15-2016 12:23 PM

Re: 1969 SuperBurb build-up (Bagged and Blown!)
 
Quote:

Originally Posted by knomadd (Post 7768409)
You are correct, it is a gen IV. Too bad I'll have to go aftermarket, but at least I can wait on that. Thanks for the heads up.

NP

Quote:

Originally Posted by Palf70Step (Post 7768498)
Burb looks and sounds good rob. What mufflers you end up with on it?

Doug Thorley Tri-Y headers, Magnaflows, 2 1/2" aluminized pipe all the way back, with an H-Pipe.

Dieselwrencher 11-15-2016 10:08 PM

Re: 1969 SuperBurb build-up (Bagged and Blown!)
 
The exhaust looks great, and it sounds great too!

Hart_Rod 11-17-2016 11:03 AM

Re: 1969 SuperBurb build-up (Bagged and Blown!)
 
Quote:

Originally Posted by Dieselwrencher (Post 7769517)
The exhaust looks great, and it sounds great too!

Thanks!

HO455 11-20-2016 12:24 AM

Re: 1969 SuperBurb build-up (Bagged and Blown!)
 
Quote:

Originally Posted by Hart_Rod (Post 7769092)
NP



Doug Thorley Tri-Y headers, Magnaflows, 2 1/2" aluminized pipe all the way back, with an H-Pipe.

If is not too much trouble, which Magnaflows did you use?
Thanks VC

Hart_Rod 11-22-2016 09:05 AM

Re: 1969 SuperBurb build-up (Bagged and Blown!)
 
1 Attachment(s)
Quote:

Originally Posted by HO455 (Post 7772927)
If is not too much trouble, which Magnaflows did you use?
Thanks VC

I believe they were these:

https://www.summitracing.com/parts/mpe-11226/overview/

Finally finished all the painting. Just need to hang some blinds and finish the bathroom. Moved the Burb back in to get a feel of where I want to place all of my tools/toolboxes.

Palf70Step 11-22-2016 05:48 PM

Re: 1969 SuperBurb build-up (Bagged and Blown!)
 
:metal:

Dieselwrencher 11-22-2016 07:14 PM

Re: 1969 SuperBurb build-up (Bagged and Blown!)
 
Very nice! I wish I would have painted all my dry wall before I piled all the stuff against the walls in my garage! :lol:

Hart_Rod 11-23-2016 08:49 AM

Re: 1969 SuperBurb build-up (Bagged and Blown!)
 
Quote:

Originally Posted by Palf70Step (Post 7775198)
:metal:

Thanks Bill!

Quote:

Originally Posted by Dieselwrencher (Post 7775271)
Very nice! I wish I would have painted all my dry wall before I piled all the stuff against the walls in my garage! :lol:

Thanks! I don't want to have to move stuff again, so I'm trying to get everything done before I start filling it back up, :lol:.

Hart_Rod 11-27-2016 09:52 AM

Re: 1969 SuperBurb build-up (Bagged and Blown!)
 
Not much progress other than moving stuff back into the shop. I did get my cruise control working and some minor tuning done, so that's a win :metal:.

Kendski 12-01-2016 11:03 PM

Re: 1969 SuperBurb build-up (Bagged and Blown!)
 
Awesome build thread. Beautiful truck.


All times are GMT -4. The time now is 01:59 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com