![]() |
Re: 1976 Square "Simple Green"
Quote:
|
Re: 1976 Square "Simple Green"
Now I will be moving onto door panels. Go a few things ordered up today.
|
Re: 1976 Square "Simple Green"
So I am 98% sure I found the fix for my washer jug rubbing without moving it and drilling hole. I bough one for a 70's model Chevelle it bolts in exactly like the stock one but it has a slant made into it so it will clear the wheel. I will know for sure tomorrow!!
|
Re: 1976 Square "Simple Green"
1 Attachment(s)
New shock for testing showed up today. Probably pulling the boot off I don't drive in rain or off road so I don't see any point of leaving it on. These babies are nice.
|
Re: 1976 Square "Simple Green"
1 Attachment(s)
And now a look at the completed dash bezel! I love how this tuned out. I am pumped to get it back and installed!!
|
Re: 1976 Square "Simple Green"
1 Attachment(s)
Yes way better looking. Now these are really really nice!! Now they just have to work. Lol.
|
Re: 1976 Square "Simple Green"
Quote:
|
Re: 1976 Square "Simple Green"
Quote:
|
Re: 1976 Square "Simple Green"
Quote:
|
Re: 1976 Square "Simple Green"
Quote:
|
Re: 1976 Square "Simple Green"
Quote:
|
Re: 1976 Square "Simple Green"
Quote:
|
Re: 1976 Square "Simple Green"
Shocks are sexy!
|
Re: 1976 Square "Simple Green"
Quote:
|
Re: 1976 Square "Simple Green"
Quote:
|
Re: 1976 Square "Simple Green"
1 Attachment(s)
Quote:
|
Re: 1976 Square "Simple Green"
Quote:
|
Re: 1976 Square "Simple Green"
1 Attachment(s)
Old vs New
That should just be enough so it won't rub anymore. |
Re: 1976 Square "Simple Green"
Quote:
|
Re: 1976 Square "Simple Green"
Quote:
|
Re: 1976 Square "Simple Green"
Quote:
|
Re: 1976 Square "Simple Green"
1 Attachment(s)
So I took my truck to the hot rod shop my buddy owns who did my trans install and exhaust. Well he calls me and says your upper control arm shim bolts are not long enough. Ok replace them. Then he calls me telling me they are having issue with bolts and they won't get it done for me this week. WTF they don't work on Fridays. So he sends me a pic of the one side they did get finished. And I was like WTF did they make custom shim plates for. Damn I just want a alignment I don't need a custom alignment. I told him I wasn't trying to spend a damn arm and a leg for a alignment. He is always wanting to make something all the time lol. But I know they are doing it right but at my cost. I don't like other people working on my stuff is part of the problem. Plus I want my truck back!! So below is the pic.
|
Re: 1976 Square "Simple Green"
So much for those control arms being an inch narrow!
|
Re: 1976 Square "Simple Green"
Quote:
And I know you are joking also! |
Re: 1976 Square "Simple Green"
You're lucky you have an alignment guy that cares.
Most shops would have said it can't be aligned and sent you on your way. And there are many truck owners that just drive them without the getting an alignment. I see it all the time on here. Throw on a 3/5 spring drop,... Done. There's so much more to doing a suspension drop to make them ride and drive good. Congrats on finding a shop that cares,... |
All times are GMT -4. The time now is 04:29 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com