The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   projects and builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=197)
-   -   Daverods project 66 (https://67-72chevytrucks.com/vboard/showthread.php?t=336798)

daverod 04-28-2010 08:18 PM

Re: Daverods project 66
 
Quote:

Originally Posted by Strodder (Post 3946568)
When you use the POR-15 make sure it's in a clean environment because it dries very show and will collect dirt. Especially in a dry climate. Where it's humid it dries faster. And mix it really good to get all the deposits from the bottom.

Think a qt will be enough?;) Did'nt you have a problem with the shine? I'm going to get semi gloss?

Strodder 04-28-2010 08:23 PM

Re: Daverods project 66
 
Yes, but it might have been because I didn't mix it good enough. I think a qt should do it if you use a brush. Just make it as smooth as you can with the brush. Watch for runs. :uhmk:

daverod 04-28-2010 08:26 PM

Re: Daverods project 66
 
Quote:

Originally Posted by scotts62 (Post 3946557)
Yeah im with you there dude :lol:

Least you have some nice wheels and tires.:lol:

scotts62 04-28-2010 08:36 PM

Re: Daverods project 66
 
Quote:

Originally Posted by daverod (Post 3946601)
Least you have some nice wheels and tires.:lol:

Wheels maybe but i wouldnt look too close at the tires if your impressed with them ;) :lol:

daverod 04-28-2010 08:43 PM

Re: Daverods project 66
 
Quote:

Originally Posted by scotts62 (Post 3946630)
Wheels maybe but i wouldnt look too close at the tires if your impressed with them ;) :lol:

Well they look good from the side. :lol: I'm going to see if I can get 20" to fit. I like the looks of yours.

scotts62 04-28-2010 09:02 PM

Re: Daverods project 66
 
:haha: thats what she said..

Yeah i like them because they are simple and not too blingy.

ruffrida2005 04-28-2010 09:49 PM

Re: Daverods project 66
 
If you guys are just feeling broke this month yall are doing good. I'm always feeling broke.

Strodder 04-28-2010 10:26 PM

Re: Daverods project 66
 
Dave, there always good deals on E-Bay, or Craigs List. People are in dire straights, and are giving things away.

daverod 04-29-2010 10:02 AM

Re: Daverods project 66
 
Quote:

Originally Posted by ruffrida2005 (Post 3946852)
If you guys are just feeling broke this month yall are doing good. I'm always feeling broke.

Least you have a job and steady check.;)

daverod 04-29-2010 10:10 AM

Re: Daverods project 66
 
Finally got my 64 running again. The oil pan gasket kicked my a$$. If anyone is thinking about doing this job be prepared. I had to jack up both sides of the motor up about 2" still could'nt get the pan off. Ended up just cleaning it up while it was still in place and put the new gasket on. When I went to put the engine mount bolts back on I stripped one.:waah: Good thing is they only cost about $6. Filled it up with royal purple and ran a can of sea foam threw it. Runs great no leaks. I'm a happy camper;)

ruffrida2005 04-29-2010 01:16 PM

Re: Daverods project 66
 
Quote:

Originally Posted by daverod (Post 3947704)
Least you have a job and steady check.;)

Not for long though. I'm getting a med board so I'll be out in about another 4 months.

daverod 04-29-2010 02:56 PM

Re: Daverods project 66
 
Well then you won't have a job but you'll still get a disability check and unemployment forever. Look on the good side you should get a lot done on your truck. Get started on the body work, muds cheap. Could have a bad back and no checks or health insurance.;)

scotts62 04-29-2010 05:51 PM

Re: Daverods project 66
 
Yeah could be a ton worse..

daverod 04-29-2010 06:59 PM

Re: Daverods project 66
 
Decided to go with the POR15 for my frame. I think I made a good choice.:smoke: Auto paint store had it in stock. Paints on really nice, kinda like water. Just have to watch for runs. Qt should be plenty for my frame.

scotts62 04-29-2010 07:00 PM

Re: Daverods project 66
 
Get it on your hands and it has to wear off so look out :lol:

daverod 04-29-2010 07:10 PM

Re: Daverods project 66
 
Ya I figured as much. Laquear thinner cleaned it right up. Paint guy said to put plastic over the can before I put the lid on or I would never get it off again.:uhmk:

scotts62 04-29-2010 07:25 PM

Re: Daverods project 66
 
:lol: yeah that would be about right, then the next time use a screw driver and knock a hole in it :lol:

daverod 04-29-2010 07:28 PM

Re: Daverods project 66
 
:lol::me:

daverod 05-02-2010 09:36 PM

Re: Daverods project 66
 
5 Attachment(s)
Painted stuff all weekend. . Took about 3 coats of por15 to get it to look right. Painted my engine and trans.:uhmk: . Still need to box in the back of my frame where my notches are and paint my spindles.:smoke:

protrash64 05-02-2010 09:42 PM

Re: Daverods project 66
 
Looks good Daverod!!!!!!! I think I'd feel right at home in your garage.:lol:

ruffrida2005 05-02-2010 09:48 PM

Re: Daverods project 66
 
Looks really good man. so when you gonna get it all done now?

protrash64 05-02-2010 09:50 PM

Re: Daverods project 66
 
Quote:

Originally Posted by ruffrida2005 (Post 3954094)
Looks really good man. so when you gonna get it all done now?

Im betting on page 70.:smoke:

daverod 05-02-2010 09:54 PM

Re: Daverods project 66
 
:lol: Page 70 would be nice. If I have the thing painted by next year at this time I'll be happy. Still have to buy a lot of stuff and stuff.:waah: Like a real compressor so I can paint. Looking at one at Lowes for 800.;)

daverod 05-02-2010 10:08 PM

Re: Daverods project 66
 
2 fenders,tailgate,wiring harness,radiator,bumpers,posi rear end, 650 carb., tires,wheels, 2 air compressors,lines,valves,controll unit,air compressor, paint gun, paint, door skins?, seats,floor mat,sound dampener, rubber seals doors/winshield, bed cover. Hell ya 10,000 and I'll be done.:metal::lol: Oh ya and another 5000 for the stuff I forgot.
2 fenders 500
tailgate 300
harness 400
rad/fan 400
bumpers 400
posi 500
carb 350
tires/wheels 2000
compressors 600
lines/valves contol 1000
compressor 800
paint gun 300
paint 500
seats 150
mat 120
sound 100
rubber seals 300
bed cover 800
Oh hell thats got be close to 10

ruffrida2005 05-02-2010 10:14 PM

Re: Daverods project 66
 
man we spend way too much on our trucks to not be worth that much


All times are GMT -4. The time now is 01:43 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com