Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
so thinking something like this with some M6 ring terminals crimped on the ends
so this high voltage (360 volt) connection from that horizontal plug to the silver box (aka Inverter) is only live when the truck is on / running, when the truck is Off you can touch this cable and there is no juice in it |
Re: My Dusty 71 GMCe Electruck
B.. A.. Awg.
|
Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
Quote:
|
Re: My Dusty 71 GMCe Electruck
5 Attachment(s)
and here's what happens if you leave me unsupervised and I'm waiting on parts to arrive
apologies for the bad pics |
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
as you can see the coveted radio delete plate was bastardized already
|
Re: My Dusty 71 GMCe Electruck
4 Attachment(s)
one down, two to go...
|
Re: My Dusty 71 GMCe Electruck
5 Attachment(s)
bro are you seriously going to show us a hole by hole update?
maybe! |
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
alright let's try a test fit
|
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
stop screwing around
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
someday this shall get some paint
|
Re: My Dusty 71 GMCe Electruck
4 Attachment(s)
I really hope using a long stand off like a 1.5" will be ok cause I really don't want to redo the Inverter bracket
|
Re: My Dusty 71 GMCe Electruck
5 Attachment(s)
I figure with the popularity of the sport we may have folks of different skill levels so it don't hurt to share some basic stuff like crimpin'
so this crimper aint the best, it leaves sharp edges, hence the file, now if you crimp in two steps, using something like a 35mm jaws then go down to 25mm ones you can sort of minimize the sharp edges, but if you just use the 25mm jaws you get a razer blade like edge to file away |
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
decided to remove the OEM Lexus battery and AC connector off of the Inverter and block it off with a simple cover
|
Re: My Dusty 71 GMCe Electruck
4 Attachment(s)
using only the the finest of scrap pieces of metal
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
not this is some serious stuff here, this is where 360 volts and bazillion amps will be coming in to this Lexus Inverter from the BMW battery pack on it's way to the Lexus transmission with two electric motors in it
The Sabertooth TM design |
Re: My Dusty 71 GMCe Electruck
https://live.staticflickr.com/65535/...2cd9d6fe_z.jpgElectric cars by Robert Moorman, on Flickr
Couldn't resist! Well planned out. |
Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
ha ha
|
Re: My Dusty 71 GMCe Electruck
5 Attachment(s)
the Double Barrel Shotgun design TM
Note: some filing and grinding required to make that cable lug fit in the 1/2" hole |
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
in order to get the 360 high voltage wires as close to the inverter as possible we have to modify the inverter bracket
|
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
but first we must reinforce what's already there and what will remain after the debauchery that is about to ensue
|
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
for this we will need some metal, so off to the Shed of Stuff where it appears we are running a little bit low on stock
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
this piece seems large enuff
|
All times are GMT -4. The time now is 01:54 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com