Re: My Dusty 71 GMCe Electruck
 

so thinking something like this with some M6 ring terminals crimped on the ends

so this high voltage (360 volt) connection from that horizontal plug to the silver box (aka Inverter) is only live when the truck is on / running, when the truck is Off you can touch this cable and there is no juice in it

Re: My Dusty 71 GMCe Electruck
 

B.. A.. Awg.

Re: My Dusty 71 GMCe Electruck
 

ah yes, variety pack, I could not agree more

Re: My Dusty 71 GMCe Electruck
 

Re: My Dusty 71 GMCe Electruck
 

thank you sir, according to that chart, a 9mm diameter puts us at 00 AWG so nearly twice the size of the 4 AWG kit I bought, however than I found these guys who claim 9mm takes a 1 AWG crimpy crimp

Re: My Dusty 71 GMCe Electruck
 

and here's what happens if you leave me unsupervised and I'm waiting on parts to arrive

apologies for the bad pics

Re: My Dusty 71 GMCe Electruck
 

as you can see the coveted radio delete plate was bastardized already

Re: My Dusty 71 GMCe Electruck
 

one down, two to go...

Re: My Dusty 71 GMCe Electruck
 

bro are you seriously going to show us a hole by hole update?

maybe!

Re: My Dusty 71 GMCe Electruck
 

alright let's try a test fit

Re: My Dusty 71 GMCe Electruck
 

stop screwing around

Re: My Dusty 71 GMCe Electruck
 

someday this shall get some paint

Re: My Dusty 71 GMCe Electruck
 

I really hope using a long stand off like a 1.5" will be ok cause I really don't want to redo the Inverter bracket

Re: My Dusty 71 GMCe Electruck
 

I figure with the popularity of the sport we may have folks of different skill levels so it don't hurt to share some basic stuff like crimpin'

so this crimper aint the best, it leaves sharp edges, hence the file, now if you crimp in two steps, using something like a 35mm jaws then go down to 25mm ones you can sort of minimize the sharp edges, but if you just use the 25mm jaws you get a razer blade like edge to file away

Re: My Dusty 71 GMCe Electruck
 

decided to remove the OEM Lexus battery and AC connector off of the Inverter and block it off with a simple cover

Re: My Dusty 71 GMCe Electruck
 

using only the the finest of scrap pieces of metal

Re: My Dusty 71 GMCe Electruck
 

not this is some serious stuff here, this is where 360 volts and bazillion amps will be coming in to this Lexus Inverter from the BMW battery pack on it's way to the Lexus transmission with two electric motors in it

The Sabertooth TM design

Re: My Dusty 71 GMCe Electruck
 

https://live.staticflickr.com/65535/...2cd9d6fe_z.jpgElectric cars by Robert Moorman, on Flickr

Couldn't resist! Well planned out.

Re: My Dusty 71 GMCe Electruck
 

luv it, that went straight to my Instagram !!!

Re: My Dusty 71 GMCe Electruck
 

ha ha

Re: My Dusty 71 GMCe Electruck
 

the Double Barrel Shotgun design TM

Note: some filing and grinding required to make that cable lug fit in the 1/2" hole

Re: My Dusty 71 GMCe Electruck
 

in order to get the 360 high voltage wires as close to the inverter as possible we have to modify the inverter bracket

Re: My Dusty 71 GMCe Electruck
 

but first we must reinforce what's already there and what will remain after the debauchery that is about to ensue

Re: My Dusty 71 GMCe Electruck
 

for this we will need some metal, so off to the Shed of Stuff where it appears we are running a little bit low on stock

Re: My Dusty 71 GMCe Electruck
 

this piece seems large enuff