The 1947 - Present Chevrolet & GMC Truck Message Board Network

Thanks Man

Thanks, it's 1969 Hugger Orange

Thanks for the picture of the bushings

:thumbs:

The seat brackets are almost done. I bolted them to the seats, set the seats in place, aligned, then tacked in place. Finaly I drilled thru the bracket and floor 16 times. I will remove the tacks and clean up

http://i369.photobucket.com/albums/o...d/DSC08811.jpg

http://i369.photobucket.com/albums/o...d/DSC08814.jpg

This is what the bottom of the center seat looks like or use too.

http://i369.photobucket.com/albums/o...d/DSC08820.jpg

Right now this is what it looks like. It got late last night and didn't finish the last leg. I just cut off the feet and turned them to the inside. There was some interfearance with the seats. I had to locate the center seat to the front somewhat because when I flipped the center seat back up it hit the back of the cab. After all of this i realized that the seat brackets probably weren't needed. I could have flipped the center seat brackets the way I did and just shortened them. The seats sat on the floor just fine without the center seat in. But with the seats being raised it made it more comfortable and more leg room. I felt like it was easier to reach the pedals. I've sat in another truck with these same seats and it was ackward driving it, by that I mean I felt like I had to lift my leg up when going from the gas to the brake.

http://i369.photobucket.com/albums/o...d/DSC08824.jpg

http://i369.photobucket.com/albums/o...d/DSC08819.jpg

Hey!!!! That looks like the damn seat out of my '00 Silverado. I'll be back in a minute. I need to go outside and check something........whew, still there!!!:lol::lol:

Alan's Classic

08-06-2009 09:32 PM

Re: My 1965 build thread

Quote:

Originally Posted by ol Curt (Post 3451141)

Hey!!!! That looks like the damn seat out of my '00 Silverado. I'll be back in a minute. I need to go outside and check something........whew, still there!!!:lol::lol:

:haha:

Got to meet HD74 today. Wish we had somemore time to chew the fat. He picked up my 2 extra hoods.

Strodder

08-06-2009 09:50 PM

Re: My 1965 build thread

Hey Allan, you need to get some posters on your walls. Like mine. :lol:

http://i369.photobucket.com/albums/o...d/DSC08819.jpg

Alan's Classic

08-08-2009 11:31 PM

Re: My 1965 build thread

2 Attachment(s)

Quote:

Originally Posted by ol Curt (Post 3451141)

Hey!!!! That looks like the damn seat out of my '00 Silverado. I'll be back in a minute. I need to go outside and check something........whew, still there!!!:lol::lol:

Quote:

Originally Posted by Strodder (Post 3451193)

Hey Allan, you need to get some posters on your walls. Like mine. :lol:

:haha:

Got to work on mine some tonight. After I spent most of the time lookin' for what I needed. Since I haven't worked on it in a while I couldn't remember where everything was. But, it finally came to me. Got the column back in and the steering shaft in. Not much but it's progress.

Damn that thing needs a bath.

greg65

08-08-2009 11:39 PM

Re: My 1965 build thread

Looks good Alan. I would almost trade you an original automatic column for your's. If I ever get any free time from work and football practice I try to ride up and see what how the truck is coming along.

scotts62

08-09-2009 01:41 PM

Re: My 1965 build thread

Man thats looking good!

daverod

08-11-2009 01:57 PM

Re: My 1965 build thread

1 Attachment(s)

I was just reading your thread again. This picture cracks me up. It looks like your freezin your a$$ off.:lol::lol:

Inverter

08-11-2009 02:33 PM

Re: My 1965 build thread

Man Alan,
Those are some beautiful little seat brackets.Very Streetrod,ish..
I taped on some temp. drop cloth windows/windshield to keep the dust out of my pile. It works..

Lookin good as always...the truck,I mean..;)

Alan's Classic

08-11-2009 09:00 PM

Re: My 1965 build thread

Quote:

Originally Posted by greg65 (Post 3454359)

Not much has changed lately, just getting dustier. Come on when your ready.

Quote:

Originally Posted by scotts62 (Post 3455098)

Man thats looking good!

:thumbs:

Quote:

Originally Posted by daverod (Post 3458865)

I was just reading your thread again. This picture cracks me up. It looks like your freezin your a$$ off.:lol::lol:

Maybe cause it was COLD!!! :haha: The garage door was even open. My wife is wanting to move back up there something fierce. I've got so much crap to move.

Quote:

Originally Posted by Inverter (Post 3458923)

That's a great idea about taping the openings. Then I could see my favorite part of the truck, the dash. :lol:

Got the shifter rod hooked up last night. Then i realized I don't have a shift indicator. i realized it a while back then forgot about it. I might just un it without.

Back out to the shop I go.

http://i606.photobucket.com/albums/t...y/DSC00816.jpg

Alan's Classic

08-11-2009 09:13 PM

Re: My 1965 build thread

Check this out. The wife wanted a new dinning room table. Couldn't afford it so we painted the old maple/white table. Still in work. She stained the top and I touched up with the airbrush and used my paint gun to spray polyurethane. She is happy so far. They really turn out good.

http://i606.photobucket.com/albums/t...2/DSC00815.jpg

daverod

08-11-2009 09:18 PM

Re: My 1965 build thread

Quote:

Originally Posted by Alan's Classic (Post 3459611)

Looks killer.:metal: Can't even see the filler. Ya move, we could go sledding together, then you could put my truck together.:lol: You'll get use to the cold. Bring that little stove you have in your shop you'll need it.;)l

Strodder

08-11-2009 09:47 PM

Re: My 1965 build thread

Quote:

Originally Posted by Alan's Classic (Post 3459611)

The table looks awesome. :metal: Wish you had a picture of it before.

Alan's Classic

08-11-2009 10:08 PM

Re: My 1965 build thread

Quote:

Originally Posted by daverod (Post 3459621)

:thumbs:

Quote:

Originally Posted by Strodder (Post 3459690)

The table looks awesome. :metal: Wish you had a picture of it before.

:thumbs:She wanted the color to match the detail in the floor.

http://i606.photobucket.com/albums/t...n/DSC00461.jpg

Strodder

08-11-2009 10:11 PM

Re: My 1965 build thread

Quote:

Originally Posted by Alan's Classic (Post 3459751)

She wanted the color to match the detail in the floor.

http://i606.photobucket.com/albums/t...n/DSC00461.jpg

WOW what a difference. Woman :rolleyes: But she's right. It will look better :thumbs:

Alan's Classic

08-11-2009 11:16 PM

Re: My 1965 build thread

Put new serpentine belt on and finish up the power steering hoses except for the fancy clamps.

http://i606.photobucket.com/albums/t...C/DSC00824.jpg

Vintage Air condensor

http://i606.photobucket.com/albums/t...C/DSC00826.jpg

Removed cross bars

http://i606.photobucket.com/albums/t...C/DSC00827.jpg

Put grill and hood stricker on to check for clearance behind. It is a tight area where the fittings will be.

http://i606.photobucket.com/albums/t...C/DSC00828.jpg

http://i606.photobucket.com/albums/t...C/DSC00829.jpg

Spaced it up a little. I lowered it a little since I took this pic. I plan on reusing the crossbars and modify them to mount the condensor.

http://i606.photobucket.com/albums/t...C/DSC00830.jpg

jonzcustomshop

08-12-2009 04:59 AM

Re: My 1965 build thread

Quote:

Originally Posted by Alan's Classic (Post 3459593)

[COLOR="Blue"]Maybe cause it was COLD!!! :haha: The garage door was even open. My wife is wanting to move back up there something fierce. I've got so much crap to move.[/COLOR

wish you could visit in the summer, much nicer, and it was cold the week you picked to come : it froze, and was in the teens and negatives the whole week!

I was hoping we would trick you with one of our balmy late december/early januarys...Its usually only real nasty from late jan. to early feb.

4dranch

08-12-2009 06:47 AM

Re: My 1965 build thread

Dang Alan. Your truck looks good.:metal:

Ooh and I guess it's time for you to start another build thread for the house projects....:lol:
Table and kitchen turned out nice.

jason65

08-12-2009 07:35 AM

Re: My 1965 build thread

Looks good Alan.

sdailey

08-12-2009 07:52 AM

Re: My 1965 build thread

I can see the sign now..............:lol::lol:

Alan's Classic Car & Furniture Restorations

4dranch

08-12-2009 08:16 AM

Re: My 1965 build thread

:lol::lol:

Strodder

08-12-2009 09:34 AM

Re: My 1965 build thread

Quote:

Originally Posted by sdailey (Post 3460220)

I can see the sign now..............:lol::lol:

Alan's Classic Car & Furniture Restorations

That will really keep you busy Allan :lol:
BTW looks good :thumbs:

MacAttack

08-12-2009 09:40 AM

Re: My 1965 build thread

:metal: That Vintage Air stuff is beautiful. Nothing like a massive condenser.

The compressor is very compact - the one out of my Chevelle, along with its torch-cut mounting bracket, weighed as much as a VW engine! I'd love to go with your set-up in my car, if it's adaptable to the 290 horse Chevy crate 350.

Mac. :chevy:

daverod

08-12-2009 09:42 AM

Re: My 1965 build thread

1 Attachment(s)

Maybe with all the money from your new bussinesses you could buy a liner for your Army coat?:lol: Brrrrrrrrrr.;)

All times are GMT -4. The time now is 04:57 PM.

Page 68 of 199

Show 40 post(s) from this thread on one page