Re: My 63 Project
Progress=:metal:
Nice goin! :chevy: |
Re: My 63 Project
1 Attachment(s)
Little bit of paint on the trailing arms.
|
Re: My 63 Project
1 Attachment(s)
And of course new bushings.
|
Re: My 63 Project
1 Attachment(s)
And boy howdy getting this cross member out is a *****!!
|
Re: My 63 Project
Hmmm....That means I ain't gonna even attempt to pull mine! LOL! :chevy:
|
Re: My 63 Project
Quote:
|
Re: My 63 Project
1 Attachment(s)
Ok, so some grinding, clean up and a coat of paint. Trailing arm cross member ready to go back in.
|
Re: My 63 Project
1 Attachment(s)
Finished up the back of the cab, for the most part. I have a couple of small spots to address.
|
Re: My 63 Project
Quote:
|
Re: My 63 Project
1 Attachment(s)
Quote:
|
Re: My 63 Project
1 Attachment(s)
Close up.
|
Re: My 63 Project
1 Attachment(s)
Now the bottom side, stock has more clearance for the driveline. About 2 inches.
So, I pulled the entire crossmember, first to pull out that angle iron that the PO welded in. And since I now have it out, I can bolt it back in, upside down if you will. This will give me more driveline clearance on the top side of the crossmember. And since I have dropped the rear end four inches, it should be better for driveline clearance. Make sense?? If it doesn't work out, I can flip it back over without much work. |
Re: My 63 Project
Trailing arms look good! Nice work! :chevy:
|
Re: My 63 Project
1 Attachment(s)
So I have been working a ton, and saving some money so I could get a new rear end as mine will not work. So I called Moser today, and they told me that they couldn't make a rear end that would work with my disc brakes. I called a local company, pretty much the same thing. So I was pretty bummed out.
I happened to check out craigslist today..... JACKPOT!!!! 12 Bolt, trailing arm suspension and 30 Spline!!! |
Re: My 63 Project
1 Attachment(s)
After a little cleaning, it's ready to go to the machine shop to get checked out, new bearings and posi unit!
And it has 3.73 gears already. |
Re: My 63 Project
1 Attachment(s)
Rear frame before.
|
Re: My 63 Project
1 Attachment(s)
And after!!!
|
Re: My 63 Project
1 Attachment(s)
And now the cross member flipped over and back in.
|
Re: My 63 Project
Coming along nicely!!
|
Re: My 63 Project
1 Attachment(s)
Look what I picked up today.
|
Re: My 63 Project
1 Attachment(s)
So we had a very productive day... Started off with the brake booster and master cylinder. That's my son helping out.
|
Re: My 63 Project
1 Attachment(s)
And here is an after picture.
|
Re: My 63 Project
1 Attachment(s)
Then we moved on to the power steering gear box. And the steering linkage.
|
Re: My 63 Project
1 Attachment(s)
And the steering column.
|
Re: My 63 Project
1 Attachment(s)
Then I went to the shop and picked up the rearend.
|
All times are GMT -4. The time now is 02:41 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com