Re: 1963 C-10 SWB BBW Fleetside in NC
 

I agree....its what I think about every time I see one.

Re: 1963 C-10 SWB BBW Fleetside in NC
 

More parts arrived yesterday. The auto column came in...looks great minus the broken selection tab thanks to UPS. Its a $7 part though, so not worth a claim through the carrier.
The 60-61 SB FS bed trim should be in sometime this week. Also got some 60-61 wide windshield trim and the 60-63 GMC door trim to top it off. So now I just need the 1960 rear cab trim and the cab will be matched to the step side.

Re: 1963 C-10 SWB BBW Fleetside in NC w/348 & powerglide
 

Been doing some more research and talking with the guys on the 348-409 forum to figure out exactly what I want to do with the 348. Found some really cool stuff there. This one would be cool to own. Twin turbo. These were built for marine applications, some ran in reverse and some normal. All were chain drive.

Also found a few other 60-66 trucks there.

Re: 1963 C-10 SWB BBW Fleetside in NC
 

Yes!! Do it! Lol. Then we can start a boosted truck club! Haha

Re: 1963 C-10 SWB BBW Fleetside in NC
 

Problem is the engine above is 1 of 12. Last one I saw up for sale was around $20,000.

Re: 1963 C-10 SWB BBW Fleetside in NC
 

That's sweet though! Heck it would be 20k well spent..if you were a million dollar man. lol

Re: 1963 C-10 SWB BBW Fleetside in NC
 

Heres a few pic of them on the dyno at Daytona Boat works in 1962. Looks like they did some diesels also.

Re: 1963 C-10 SWB BBW Fleetside in NC
 

got a bunch done this weekend. front end pulled and frame cleaned up. got the clutch mounts off and the crossmember out. have to put new cab bushings on soon, so i'll hit the upper rivots then. clutch pedal assembly removed and the manual column removed. found a rear view mirror, sunvisors, side mirrors, cab dome light and mat in my parts room to replace the missing parts. i want to gut and paint this cab soon, but i want all the pieces there. will get pics up tomorrow

Re: 1963 C-10 SWB BBW Fleetside in NC
 

Eagerly awaitin the pictures! :metal:

Re: 1963 C-10 SWB BBW Fleetside in NC
 

Some pics from this Saturday....frame prep and clean up. Got the column pulled Sunday. Clutch frame linkages removed and cross member for bell housing removed.

Re: 1963 C-10 SWB BBW Fleetside in NC
 

Pics from inside the cab. Clutch pedal assembly removed and manual column pulled. Rear view mirror and sunvisor installed....have a pass side also. And the correct door handles in and rubber mat down. Need to order a signal switch for the column and then it'll be ready to install. I'm ready for the red paint to go away.....

Just realized that at some point a 60-61 cluster was installed.

Re: 1963 C-10 SWB BBW Fleetside in NC
 

Frame looks good! :chevy:

Re: 1963 C-10 SWB BBW Fleetside in NC
 

Thanks TJ. Definitely looking better. Hard working on two trucks, but I just couldn't see not cleaning up the front end while it was off.

Re: 1963 C-10 SWB BBW Fleetside in NC
 

Two at a time!!! You da man...:metal:

Re: 1963 C-10 SWB BBW Fleetside in NC
 

Haha....I hear you Don. Don't know about being the man, but it sure keeps it interesting and busy. Nice thing is one project is practice for the 2nd....so keeps it efficient

Re: 1963 C-10 SWB BBW Fleetside in NC
 

More parts in...got the deluxe wheel in. Will need to fix to small cracks on the back of the wheel...no biggie as the stepside wheel gave me practice. Chrome looks pretty good....a few pits, but a nice addition to the truck.

Re: 1963 C-10 SWB BBW Fleetside in NC
 

Nice wheel !!
I so want to try my hand at reducing the diameter like Astronaut did, but would be scared to cut one of those up !!

Re: 1963 C-10 SWB BBW Fleetside in NC
 

Thanks....I'm still a manual steering kinda man, so I like the larger wheels. I'd go to a pick and pull and get a scrap wheel to practice on personally if I were to shrink one. I've always had the standard wheels, but with this build going to an automatic...I wanted a deluxe wheel.

60-61 bed trim should be here soon, wide windshield trim enroute and I have the GMC side window trim to top it off. Just need 1 more back cab trim and it'll match the stepside.

Re: 1963 C-10 SWB BBW Fleetside in NC
 

My niece says we should hook up an LED in the center section.....when she said this I though of you and your mods.

Re: 1963 C-10 SWB BBW Fleetside in NC
 

That is a very nice looking wheel!

I plan to reduce the diameter of my steering wheel, I have a great magazine article on how to go about it. It would be right up you alley Murph. When I do mine I will employ others more skilled than myself, but it would be a walk in the park for you!

Re: 1963 C-10 SWB BBW Fleetside in NC
 

I bet with all the members here we could find you a practice wheel.

Re: 1963 C-10 SWB BBW Fleetside in NC
 

Dudes !!
I have a spare wheel that I picked up to practice on, and I have it sectioned already, but at the time my skills were too far under par to seriously attempt it. That, and I decided I wanted a 1/2" to 3/4" piece of plywood with the new size diameter cut out to use as a guide for the wheel to ensure I got it as close to perfectly round as possible.
We all know how unnerving an out of round steering wheel is....

Man if I had a spare deluxe wheel to play with, you could bet your last penny I would light up the center part !! Maybe to only come on with the horn though......or dimmed and gets brighter with the horn..... Hmmmmmmmm

Anyways, here is Astronauts page on his wheel when he reduced it on the Goldilocks build:
http://67-72chevytrucks.com/vboard/s...g+wheel&page=9

In my Favorites for my web browser, I have a folder of things to do and that is where I index pages like his.

Must
Resist
New
Ideas
!!!!!!

Re: 1963 C-10 SWB BBW Fleetside in NC
 

i remeber his post on the wheel. i like the full size wheel for now. i have a spare center section for the deluxe wheel...and it has the screw on center emblem, which would make the process easier.... alot of the ones ive seen like mine are held on by rivets.

Re: 1963 C-10 SWB BBW Fleetside in NC
 

http://67-72chevytrucks.com/vboard/s...d.php?t=578555

Another thread I have saved on the wheel reduction, similar technique as the magazine article I have, I will scan the article and add it to the above thread.

Re: 1963 C-10 SWB BBW Fleetside in NC
 

Home late, got some paint on some parts for the stepside and finished the shroud for the fleetside.