![]() |
Re: My suburban's Twisted Little Sister
2 Attachment(s)
Quote:
We got the two inch strip tacked in place to lower the wheel opening. We finally got the Easy Grind mig wire today so we can start welding the body panels back together later this week. |
Re: My suburban's Twisted Little Sister
3 Attachment(s)
We finished the welding on the two inch strip yesterday. Today we got started on the body panels. We started on the passenger side. The seam took some massaging to get it to line up. i guess the factory allowed some variation from front to back.
|
Re: My suburban's Twisted Little Sister
Lookin good!
|
Re: My suburban's Twisted Little Sister
Nice alignment on that panel. Will come out nice!
|
Re: My suburban's Twisted Little Sister
2 Attachment(s)
Quote:
Quote:
We had to make a horizontal relief cut in both drivers and passenger sides |
Re: My suburban's Twisted Little Sister
1 Attachment(s)
Here's the passenger side welded and cleaned up.
|
Re: My suburban's Twisted Little Sister
Quote:
|
Re: My suburban's Twisted Little Sister
Your work continues to just have me grin and shake my head.
You guys really are so far up that curve. Amazing progress, and love the infills etc. |
Re: My suburban's Twisted Little Sister
WOW! I wanna skip ahead and see this thing finished so bad but I also like seeing the progress on builds like this.
Amazing work! |
Re: My suburban's Twisted Little Sister
5 Attachment(s)
Quote:
Quote:
Quote:
Today we got the drivers side partly welded. Then we decided to fit the wheel well so we extended the wheel center line. Then test fit the wheel well and found it had to be trimmed to fit between the front and rear braces |
Re: My suburban's Twisted Little Sister
Quote:
|
Re: My suburban's Twisted Little Sister
5 Attachment(s)
When got the wheel well closer we had to remove more of the inner panel front and back
|
Re: My suburban's Twisted Little Sister
3 Attachment(s)
Some final trimming and it fits fairly good
|
Re: My suburban's Twisted Little Sister
Quote:
|
Re: My suburban's Twisted Little Sister
Nice work! I would like to be hanging out having fun in the shop with you guys!
|
Re: My suburban's Twisted Little Sister
Quote:
|
Re: My suburban's Twisted Little Sister
Quote:
|
Re: My suburban's Twisted Little Sister
3 Attachment(s)
Yesterday we finished the welding on the drivers side. Then we found that the inner fender was rubbing on the quarter panel so we cut a horizontal line on the inner fender. We used a hammer and dolly to fold the edges in a little then welded it back together.
|
Re: My suburban's Twisted Little Sister
Quote:
|
Re: My suburban's Twisted Little Sister
Quote:
|
Re: My suburban's Twisted Little Sister
Quote:
|
Re: My suburban's Twisted Little Sister
3 Attachment(s)
Quote:
+plus another cool one- the 63-67 'vette front looks made for it! |
Re: My suburban's Twisted Little Sister
4 Attachment(s)
We got the drivers side wheel well modified for clearance. Then started on the lip of the wheel opening. We still have some more welding to do.
|
Re: My suburban's Twisted Little Sister
Wow!!! Keep on twist'n!!!
|
Re: My suburban's Twisted Little Sister
Quote:
|
All times are GMT -4. The time now is 09:29 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com