Re: The "In over my head" build thread
5 Attachment(s)
Been keeping busy on some small tasks with the end goal of undercoating and getting the body back on the frame by Spring.
So with that in mind I started finishing things off on the Chassis that is essentially 95% done. I had my stock tank boiled out and lined because I was not happy at all with poly plastic tank - it's for sale if anyone is interested :rolleyes: Also no one reproduces the rubber isolators that go under the tank straps and the tank flange so I've got some 1/8" sheet rubber coming and I will copy the original rubbers. Then I need to get the fuel lines finished off. Hard lines are in, just the rubber hose connections need to be put on. Then I turned back to getting the body ready for undercoating. I cut out the all the rust spots on the bed floor and will be patching in scavenged '68 long bed patches soon. Pics of the holes I cut in the floor - 5 spots in total were cut out. This is my first attempt at rust repair but I'm excited to learn. What's the worst that can happen? Rear tail gate area - both sides are like this. Attachment 1350940 Attachment 1350943 Crossmember was toast also but I will patch that also. Attachment 1350942 3 of the 4 wheel tub corners look like this, but this one was the worst one. Attachment 1350941 Attachment 1350944 I'll prep the patches soon and get these checked off my list. I am also stealing this "punch list" idea from the infamous "Low Buck Junkyard Build" - So here goes: TUB WORK
CHASSIS WORK
|
Re: The "In over my head" build thread
Thanks for your help today.. I'm pretty sure I'm going to buy a welder now even though I'm not quite sure how much I'll actually use it
Love the title of your build thread.. I believe I'm right there with you:crazy: |
Re: The "In over my head" build thread
Will hopefully get more time tomorrow to work on the K5.
Last few weekends I got a bit further on the bed patching. I also re-installed my original gas tank after the radiator shop was done with it. I made a set of 1/8" rubber isolators for the tank flange and straps using the originals as templates. Turned out really nice I think. Found starter bolts that were the correct 4 5/16" length for my starter, got radiator hoses and clamps installed, the BTO TV Made EZ kit installed, transmission cooler lines are almost in...lots more to do though. Here's an updated punch list: TUB WORK
CHASSIS WORK
|
Re: The "In over my head" build thread
3 Attachment(s)
Did a little work saturday on the plug wiring. Got these brackets from R&S. I think they'll work just fine.
Attachment 1358512 Also been doing a bunch of research on SBC timing and decided to change out the springs, vacuum canister, and vacuum limit plate on my GM HEI distributor. Not much to look at it but it should help me get somewhere close to 14 deg. initial timing, 20 mechanical advance all in at 3200 rpm, then 12 degrees of vacuum advance. Then I can adjust from there. Attachment 1358513 Attachment 1358514 That's it for now. Will try to get the plug wires shortened soon since some are way too long for a clean look. Then off to all other little tasks left for the engine. |
Re: The "In over my head" build thread
3 Attachment(s)
8.7.17 - Turning the page
Hey everyone! After a long hiatus :whine: and a big life change I'm happy to say i'm moving forward with the K5 build. This was my view on Saturday as the body was picked up and taken to be worked on. Same shop that Mike (@72K5CSTDarkOlive) used in his build. Attachment 1678194 Attachment 1678195 Attachment 1678196 I'll be sure and update with pics and progress along the way. Stay tuned! |
Re: The "In over my head" build thread
That rotisserie looks familiar!
|
Re: The "In over my head" build thread
5 Attachment(s)
Just a little update showing some rust repair:
Attachment 1742800 Attachment 1742798 Attachment 1742797 Attachment 1742799 At least the tailgate was nice :waah: Attachment 1742801 Underside is now lined and they're prepping to paint the firewall and jams before mounting back on the frame! |
Re: The "In over my head" build thread
That shop looks awfully familiar ;)
|
Re: The "In over my head" build thread
Quote:
|
Re: The "In over my head" build thread
Thanks, For the pictures. I need all the help I could get.
|
Re: The "In over my head" build thread
5 Attachment(s)
1/26/18 :cool:
I'm in genuine awe. Even though I've thought about this moment for 8+ years I can't believe it's happened, and I can't believe how close to the finish line I am. Attachment 1744539 Attachment 1744540 Attachment 1744541 Attachment 1744542 Attachment 1744543 |
Re: The "In over my head" build thread
Awesome! The color looks great!
I'm so envious!!! |
Re: The "In over my head" build thread
5 Attachment(s)
1/30/2018 - A long time coming
I had to go back and look to the very first post I made in this thread. 2/4/2010 me and a small army took the body off the frame. It took nearly 8 years - but holy crap does THIS make me excited! Attachment 1745979 Attachment 1745980 Attachment 1745981 Attachment 1745982 Attachment 1745983 |
Re: The "In over my head" build thread
Damn that looks good!!!
|
Re: The "In over my head" build thread
5 Attachment(s)
Took a little longer than expected but...here she is!
Attachment 1788882 Attachment 1788883 Attachment 1788884 Attachment 1788885 Attachment 1788886 |
Re: The "In over my head" build thread
That's gotta be a great feeling!
Nice work, Rg |
Re: The "In over my head" build thread
Sweet!
|
Re: The "In over my head" build thread
Nice truck, I have three blazers 2 4x4's and one 2wd....the 2wd is going to be painted red and white like a c10....love the red.... enjoy !!!!!!
|
Re: The "In over my head" build thread
Very nice-congrats!!!
|
Re: The "In over my head" build thread
Wow
|
Re: The "In over my head" build thread
looks great! 8 years to finish is way better than not finishing at all... Congrats.
|
Re: The "In over my head" build thread
Can a mod please move this to the builds section? :mm:
|
Re: The "In over my head" build thread
I'd love to get the contact info of the shop in the bay area...Looks amazing
|
Re: The "In over my head" build thread
Talk to Manuel at BFS
https://www.bodyandframespecialists.com/ They also did Mike's dark olive K5 that looks flawless. |
Re: The "In over my head" build thread
3 Attachment(s)
|
All times are GMT -4. The time now is 11:08 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com