![]() |
Re: The Snortin' bull
4 Attachment(s)
Rear brakes's all assembled and reconditioned and ready to from backing plate's out.Waiting for axle's now to come from being redrilled.
|
Re: The Snortin' bull
1 Attachment(s)
Adapting the 1960 gmc hubcap's to later model 5 on 5 wheel's.This is still a budget build . I had some (impala) Caprice Police Cruiser rim's around so I used these for the Bull at this time. Kept it simple to keep the cap's retained.
|
Re: The Snortin' bull
2 Attachment(s)
The axle's are back.Reinstalled them today into housing. Redrilled for 5 on 5 and turned down in the center to fit the later model drum's.FYI or BTW on these early Dana 44 axle's they use same as the big Ford ( torino ) axle bearing's very common and they are 30 spline axle shaft's.
|
Re: The Snortin' bull
2 Attachment(s)
Rear brake drum's are on. As other's have noted in the past on these build's 11 x 2 finned from later c-10's work and clear the backing plate.
|
Re: The Snortin' bull
1 Attachment(s)
Also the correct rear park cable's arrived and are now installed.Napa still offer's these.LMC list them though they are not for the 1960 to 63 dana's.
|
Re: The Snortin' bull
1 Attachment(s)
Rear wheel's back on .
|
Re: The Snortin' bull
Lookin very nice. Love the caps.
|
Re: The Snortin' bull
Those caps really set it off, nice touch.
|
Re: The Snortin' bull
Quote:
|
Re: The Snortin' bull
Quote:
|
Re: The Snortin' bull
2 Attachment(s)
Exhuast need's to be run off the shorty block hugger header's before I start the engine. Gettin there . Check list to move the truck on it's own down to few item's.
|
Re: The Snortin' bull
2 Attachment(s)
a little frame webbing insulation for the bed wood to lay on bed cross rail's.
|
Re: The Snortin' bull
Getting closer and closer every update.
|
Re: The Snortin' bull
It's funny, I'd never see a hubcap like yours till I saw this thread. Then 4 of these showed up for sale locally, still in the factory boxes, never installed. 1955 though, you said yours were 1960?
http://bsdwolf.com/hub.JPG |
Re: The Snortin' bull
Quote:
|
Re: The Snortin' bull
naloc, check your private message folder.
|
Re: The Snortin' bull
2 Attachment(s)
I did manage to get a bit of time in this weekend on the Bull .Not much Thuough, got the exhaust started .The first foot of the down tube's.
|
Re: The Snortin' bull
1 Attachment(s)
Piece by piece.Fab up exhaust front to back. This is alway's time consuming.There are very talented exhaust builder's out there though on my home garage floor I am not one of them.Especially on a bagged truck.
|
Re: The Snortin' bull
1 Attachment(s)
Right side exhaust together to midpoint of truck.
|
Re: The Snortin' bull
1 Attachment(s)
one last underhood install the detent cable bracket for the transmission tv cable.
|
Re: The Snortin' bull
Amazing looking work here.
Every hour you get is progress. |
Re: The Snortin' bull
2 Attachment(s)
Got the lh and rh front exhaust pipe's done and hung.The goal is tuck up high and muffler's to the rear past the cab floor .
|
Re: The Snortin' bull
1 Attachment(s)
This is hour's into pipe's finally a muffler .More pipe to fab.to come.
|
Re: The Snortin' bull
2 Attachment(s)
The easy way out build a couple of stack's up thru bed floor.Just playin' around.Fab'd pipe's to flow out to side's to follow kickup and to rear of bed into corner's to dump.
|
Re: The Snortin' bull
Quote:
|
All times are GMT -4. The time now is 01:43 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com