Re: Do you need '64-'66 Chevy Truck Parts?
 

Tony,

Hello, I'm looking for a factory A/C setup for a 64-66, specifically the vents, controls, and evaporator/heater box-case (all of the inside the cab parts) . I have a 66 C10 panel truck with the two speed fan and firewall mounted heater box and would like to upgrade/add A/C to my truck. I plan on modifying the system to use R134a and use a one off compressor - most likely a sanden unit and will be purchasing new condensor and evaporator coils as well as fabricating the refrigerant lines and brackets for this application. Any help is appreciated.

Thanks in advance,
Pete

Re: Do you need '64-'66 Chevy Truck Parts?
 

Do you have any good bed sides for a short stepside bed? I have the outer fenders, front cab panel and tailgate but no bed sides..
Pm me if you do, dont worry about checkng shipping ill make the drive if you have them.

Thanks, Scott

Re: Do you need '64-'66 Chevy Truck Parts?
 

1966 Pass side bed side.Short fleet?

Re: Do you need '64-'66 Chevy Truck Parts?
 

Tony,

It looks like I need a passenger side motor mount tower V8 small block, the one in my truck is from a 6cyl. (see thread in 60-66 forum). Would you have such a part?

Thanks, Dave

Re: Do you need '64-'66 Chevy Truck Parts?
 

Tony,

I am looking for the passenger side E-brake intermediate cable support rod, would you have such a beast?

Thanks,

Tom

Re: Do you need '64-'66 Chevy Truck Parts?
 

Do you have any posi rearend for a coil sprung rear 65. Hopefully in the 3.73-4.11 gear?

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hey Tony,
Have you had any luck getting the V8 engine perches? I am in desperate need I have my paint guys shop tied up.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hi,

I am looking for the rear cab braces for a 65 suburban, the one just at the back edge of the door. I have been told they are different than the pick up but have not compared them yet myself. Do you have any and if so how much?

Thanks,
louie_trucks
Aka Darrell Atlanta Ga

Re: Do you need '64-'66 Chevy Truck Parts?
 

Dave:

Unfortunately, I don't have any personal, first-hand experience with the Suburbans or Panels, therefore I can not speak to the fit-up of the front or rear bumpers or the interchangeability of them between the Suburbans/Panels and trucks.

Sorry I couldn't be more help to you.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Anthony:

I don't have a '62 grille assembly at this time. Sorry I couldn't help.

Re: Do you need '64-'66 Chevy Truck Parts?
 

I am fresh out of quality front fenders at this time, howver I do have a few good, used fleetside tailgates. A good, used, rust-free fleetside tailgate is $125.00, plus $60.00 packaging & shipping, via UPS, Ground.

Please let me know if I can help you with this part or other 4-5-6 Chevy Truck parts in the future.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Jon:

Sorry for my delay in responding. Do you still need a factory steering wheel, factory AM radio and factory antenna? If so, let me know and I will check to see what I have. I am out of town until June 4th, so it will be a while before I can get back to you.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Ya, sure do. Take your time Tony, I'm in no rush at all.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Bob:

Here is a quick run-down of the V8 engine perches. I found a pair of V8 and six cylinder engine perches. Since I planned to be in Medford, OR visiting my family and working for my younger brother for three weeks, I had both sets shipped to his shop in OR. The goal was to have a pattern made of both sets, in order to reproduce them, if possible. I have sandblasted both sets and am having both sets powder-coated in underhood black on Monday. I am meeting with a fabricator on Tuesday, to see if he can reproduce them. I will be sending them to you on Wednesday, May 28th from Medford, OR.

I really wanted to, at least make a pattern, before shipping them, just in case we could reproduce them. They have been so hard to locate, I was afraid it would be some time before I could find another pair, if I let them get away. I am very sorry for the delay, but you will have a pristine set, ready to install, when you receive them.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Pete:

Sorry for my delay in responding, but I have been out of town visiting family and working for my brother in Medford, OR for the past few weeks. I will be returning to my shop on June 5th, so I can jump on this. I have a few complete factory AC systems, but I will have to double-check, to ensure it is complete and the overall condition. I will follow-up with you soon and thanks for your interest.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Scott:

I have a good pair of swb fleetside bed sides...they are loose and in good, used condition. I am out of town visiting family and working until June 5th, so I will have to jump on this upon my return. Thanks for your interest and I will keep you posted.

Re: Do you need '64-'66 Chevy Truck Parts?
 

I have a good pair of swb fleetside bed sides...they are loose and in good, used condition. I am out of town visiting family and working until June 5th, so I will have to jump on this upon my return. Thanks for your interest and I will keep you posted.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Dave:

I have what are looking for, but I am out of town until June 5th. Can you wait this long?

Re: Do you need '64-'66 Chevy Truck Parts?
 

Tom:

I have what you need, but I am out of town until June 5th. Can you wait this long?

Re: Do you need '64-'66 Chevy Truck Parts?
 

I have a few factory rearends, but I will have to double-check if they are posi-traction. I am certain they are all 3.73:1, because that was factory equipment in the 4-5-6 1/2 ton Chevy trucks.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Darrell:

Thanks for the inquiry. I don't have any Surburban specific parts. Sorry I couldn't help you with these parts, but thanks for the inquiry and please keep me in mind for other 4-5-6 Chevy Truck parts in the future.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Ok let me know a price if avalible.

Re: Do you need '64-'66 Chevy Truck Parts?
 

hey Tony, I'm interested in a complete a/c set up also (with the factory dash, if possible), no hurry, when ever you get a chance I would like pics, list of parts, and price. Thanks
also would like prices on the short fleet bed sides also, thanks, Joe

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hey Tony, I know you are not the burban man, but its worth a try. I need the upper latch and control rod for the drivers side rear barn door. you got anything? thanks

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks Tony, keep me posted.