The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 7 of 108 « First 23456 7 891011121757107 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1991 Blazers, Jimmys, and Suburbans Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=37)
-   -   Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy (https://67-72chevytrucks.com/vboard/showthread.php?t=554172)

jmedero 12-06-2012 08:58 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
"At a steady pace" lol

I'm sure a whip was cracked at the end of that sentence. Lol
Posted via Mobile Device

butternut1972 12-06-2012 11:32 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Signed up!

longbed67 12-07-2012 02:00 AM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Curious to see what comes of this! :)

black_sheep454 12-07-2012 01:32 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Quote:
Originally Posted by 67cheby (Post 5741804)
Hey guys i posted over in the for sale section but i am looking for a 67-72 GMC tailgate that i can cut the stamped in GMC part out of to weld in the Blazer tailgate, anyone have anything ?
I have one too but it's a pretty dang nice gate.
Posted via Mobile Device

67cheby 12-07-2012 02:46 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Quote:
Originally Posted by Graham57a (Post 5743554)
Subscribed. Looking forward to seeing this one
thank you
Quote:
Originally Posted by duallyjams (Post 5744138)
stay tuned !
Quote:
Originally Posted by jmedero (Post 5744161)
"At a steady pace" lol

I'm sure a whip was cracked at the end of that sentence. Lol
Posted via Mobile Device
you know who the boss is now !!
Quote:
Originally Posted by butternut1972 (Post 5744582)
Signed up!
thanks man
Quote:
Originally Posted by longbed67 (Post 5744803)
Curious to see what comes of this! :)
thanks
Quote:
Originally Posted by black_sheep454 (Post 5745400)
I have one too but it's a pretty dang nice gate.
Posted via Mobile Device
how much ? probably too nice, hoping to find someone that has one with a damaged back so i can just buy the front off of it !

truckzilla 12-07-2012 04:13 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Hey Mike, I'll keep an eye out for one down this way for ya!

67cheby 12-07-2012 07:26 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Great news , i sold the rallys and tires and the complete motor..........that means, next week= TEAR DOWN week !! Man i cant wait to show you guys all the cool stuff headed our way, gonna look like the BEST CHRISTMAS ever for Square Peg in a couple weeks !! The chassis part of this build is going to go quick !! Still looking for a low mileage 5.3 and 4l60e combo if someone runs across one ! COOL THINGS COMING, STAY TUNED !

truckzilla 12-07-2012 07:29 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
I thought it was today Mike that you were going to unveil the mystery news. Did I miss something?

67cheby 12-07-2012 07:33 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
i am waiting for the final confirmation email, dont want to jinx it !! LOL

truckzilla 12-07-2012 07:37 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
No, I certainly wouldn't want that to weigh heavily over my head if I were the cause of that! :lol: Hopefully Monday will come and we'll all hear some news that will knock our socks off!

Now stop all this silly waste of time punching on keys and get to work! Time (and SEMA) waits for no man!

67cheby 12-07-2012 07:39 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
LOL...still at my real job until 6 ! But then i am going to look at a super nice 79 front clip !!

truckzilla 12-07-2012 07:42 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Ha! Real Job! Anyway, I hope that '79 front clip is exactly what you're looking for and that you can get it for a decent price! Best of luck!

What, did somebody say it was beer-thirty?
:lol:

black_sheep454 12-07-2012 08:30 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Ya it's probably nicer than you'd want to cut up, but I'd take 300 for it picked up. I'll also keep my eye out for a rough one.
Posted via Mobile Device

y5mgisi 12-07-2012 08:35 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Subscribed. Sounds like a cool build!

classicchev 12-07-2012 08:53 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Already eh!!!!!! wont even let the welder cool down and your at it again?

black_sheep454 12-07-2012 11:29 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
It's around Kansas city but it's super cheap if you can get a good deal on shipping.

http://kansascity.craigslist.org/pts/3431080414.html

67cheby 12-07-2012 11:44 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Quote:
Originally Posted by truckzilla (Post 5745940)
Ha! Real Job! Anyway, I hope that '79 front clip is exactly what you're looking for and that you can get it for a decent price! Best o
What, did somebody say it was beer-thirty?
:lol:
The front clip is amazing, I bought it plus a set of doors and a nice front bumper ! Pics tomorrow !
Quote:
Originally Posted by black_sheep454 (Post 5746012)
Ya it's probably nicer than you'd want to cut up, but I'd take 300 for it picked up. I'll also keep my eye out for a rough one.
Posted via Mobile Device
Thanks
Quote:
Originally Posted by y5mgisi (Post 5746022)
Subscribed. Sounds like a cool build!
Thank you
Quote:
Originally Posted by classicchev (Post 5746061)
Already eh!!!!!! wont even let the welder cool down and your at it again?
Lol, it's an addiction ! See ya at SEMA 2013 !
Quote:
Originally Posted by black_sheep454 (Post 5746351)
It's around Kansas city but it's super cheap if you can get a good deal on shipping.

http://kansascity.craigslist.org/pts/3431080414.html
Thanks man I will call him tomorrow !
Posted via Mobile Device

FRENCHBLUE72 12-08-2012 05:12 AM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Im in on page 7 man I need to get on the board more..

67cheby 12-08-2012 10:15 AM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
3 Attachment(s)
welcome aboard !! LOL, Well last night was a success, i picked up a killer front clip, set of doors and a early front bumper !! oh and i donked out the Jimmy !

oldman3 12-08-2012 11:28 AM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
All right, ready for SEMA:metal::fry::no:...Jim

raull 12-08-2012 12:21 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
the front clip looks in good shape !!!

moneyeater 12-08-2012 12:21 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
I´m curious what this square will look like and besides i love girls with their own trucks!
Volker

67cheby 12-08-2012 12:45 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Quote:
Originally Posted by oldman3 (Post 5746931)
All right, ready for SEMA:metal::fry::no:...Jim
what you dont like the DONK , bling/blingy look ? LOL
Quote:
Originally Posted by raull (Post 5747022)
the front clip looks in good shape !!!
it is VERY nice !
Quote:
Originally Posted by moneyeater (Post 5747023)
I´m curious what this square will look like and besides i love girls with their own trucks!
Volker
me too ! LOL

shawno72 12-08-2012 01:14 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
That donky must be for a honky. :lol:

mrhino 12-08-2012 01:50 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Quote:
Originally Posted by moneyeater (Post 5747023)
I´m curious what this square will look like and besides i love girls with their own trucks!
Volker
me three


All times are GMT -4. The time now is 04:16 AM.
Page 7 of 108 « First 23456 7 891011121757107 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com