Re: 1970 Chevrolet С-10 "Brigadier"
 

air cleaner and pipes
http://funkyimg.com/i/JNGB.jpghttp://funkyimg.com/i/JNGC.jpghttp://funkyimg.com/i/JNGD.jpghttp://funkyimg.com/i/JNGE.jpg

Re: 1970 Chevrolet С-10 "Brigadier"
 

Re: 1970 Chevrolet С-10 "Brigadier"
 

Lookin Good Dima! :metal:

Re: 1970 Chevrolet С-10 "Brigadier"
 

thanks!!

Re: 1970 Chevrolet С-10 "Brigadier"
 

Excellent progress Dima! Love all the new parts. keep up the good work. You'll be driving her again soon....

Re: 1970 Chevrolet С-10 "Brigadier"
 

thanks Mike, I think I will drive next season....still a lot of work with bed

Re: 1970 Chevrolet С-10 "Brigadier"
 

the work continues
http://funkyimg.com/i/KgXF.jpg
http://funkyimg.com/i/KgXG.jpg
steering shaft and gear connected....
http://funkyimg.com/i/KgXD.jpg
http://funkyimg.com/i/KgXC.jpg
but need to change Steering Couplers
http://funkyimg.com/i/KgXE.jpg

Re: 1970 Chevrolet С-10 "Brigadier"
 

new radiator is wider and thicker
http://funkyimg.com/i/KgYq.jpg
now need to adapt the mount
http://funkyimg.com/i/KgYp.jpg
will be higher a little, but ok, hood will be closed normally, already checked
http://funkyimg.com/i/KgYr.jpg

Re: 1970 Chevrolet С-10 "Brigadier"
 

Re: 1970 Chevrolet С-10 "Brigadier"
 

WooHoo! Great progress bud! Keep it up and you will be driving this soon!

Re: 1970 Chevrolet С-10 "Brigadier"
 

You've came a long way. Looking good. I see it has eyes!

Re: 1970 Chevrolet С-10 "Brigadier"
 

Thanksn BigDaddyV, I think next season

Re: 1970 Chevrolet С-10 "Brigadier"
 

Thanks Shawn!
yep..he received his sight:lol:

Re: 1970 Chevrolet С-10 "Brigadier"
 

Was ordered parts from US
Some began installing
Power steering hoses
http://funkyimg.com/i/LXmg.jpghttp://funkyimg.com/i/LXmh.jpg
brake lines
http://funkyimg.com/i/LXmc.jpghttp://funkyimg.com/i/LXmd.jpghttp://funkyimg.com/i/LXme.jpghttp://funkyimg.com/i/LXmf.jpg

Re: 1970 Chevrolet С-10 "Brigadier"
 

Re: 1970 Chevrolet С-10 "Brigadier"
 

Dima,
Where did you put your proportioning valve?
Everything else is looking good!

Re: 1970 Chevrolet С-10 "Brigadier"
 

Thanks BigDaddyV!!
We decided that proportioning valve not needed.
In the original, it did not stand. I left the drums and brake (all 4 ).
In the future we will see

Re: 1970 Chevrolet С-10 "Brigadier"
 

Re: 1970 Chevrolet С-10 "Brigadier"
 

Dima,
I read somewhere about copper tubing becoming hard and brittle after a while. Have you ever heard of that? Just curious if that would become a safety problem? Nice work on the battery box.

Re: 1970 Chevrolet С-10 "Brigadier"
 

Thanks Mike!
I have not heard anything yet about brittle of the copper pipes.
In any case, a lot of my friends use copper pipes in the brake system. none had any problems

Re: 1970 Chevrolet С-10 "Brigadier"
 

battery support
http://funkyimg.com/i/NYMf.jpg
washer support, horn
http://funkyimg.com/i/NYMg.jpg
changed thermostat
http://funkyimg.com/i/NYMh.jpg

Re: 1970 Chevrolet С-10 "Brigadier"
 

connect the vacuum pipe
http://funkyimg.com/i/NYMi.jpghttp://funkyimg.com/i/NYMj.jpg

Re: 1970 Chevrolet С-10 "Brigadier"
 

lift truck, replace the cushion of the center shaft bearing
http://funkyimg.com/i/NYMk.jpghttp://funkyimg.com/i/NYMm.jpghttp://funkyimg.com/i/NYMn.jpghttp://funkyimg.com/i/NYMo.jpghttp://funkyimg.com/i/NYMp.jpg

Re: 1970 Chevrolet С-10 "Brigadier"
 

http://funkyimg.com/i/RtEg.jpg
http://funkyimg.com/i/RtEj.jpghttp://funkyimg.com/i/RtEn.jpg

Re: 1970 Chevrolet С-10 "Brigadier"
 

changed shaft bearing.
the parking brake cable.
http://funkyimg.com/i/RtFJ.jpghttp://funkyimg.com/i/RtFK.jpghttp://funkyimg.com/i/RtFL.jpg
bought the windshield washer tank
http://funkyimg.com/i/RtFM.jpg