The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 7 of 12 « First 23456 7 89101112
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)
-   -   MD Parting 72 burb (https://67-72chevytrucks.com/vboard/showthread.php?t=751286)

mrbudd55955 04-15-2018 11:18 AM
Re: Parting 72 burb
 
I am just looking for some to get by for now. I have front metal and plastic ones so I would just end up painting them for now.

richard2717 04-15-2018 12:27 PM
Re: Parting 72 burb
 
5 Attachment(s)
Quote:
Originally Posted by mrbudd55955 (Post 8238775)
I am just looking for some to get by for now. I have front metal and plastic ones so I would just end up painting them for now.
I have 3 singles left. Both 4th doors are in decent shape
The 3rd door one has several extra screw holes and it looks like something took a small chunk out of it but it is still very usable.

I can do $75 shipped on your choice of a pair. If you want them my PP is in my signature below.

Thanks
Richard


.

richard2717 04-15-2018 12:28 PM
Re: Parting 72 burb
 
3 Attachment(s)
3 more pics


.

mrbudd55955 04-15-2018 01:33 PM
Re: Parting 72 burb
 
I will do the green false door and white 3rd door. Pp sent
Thanks Jeremy

richard2717 04-15-2018 01:37 PM
Re: Parting 72 burb
 
Quote:
Originally Posted by mrbudd55955 (Post 8238885)
I will do the green false door and white 3rd door. Pp sent
Thanks Jeremy
Got your payment and they will ship tomorrow. Will pm tracking as well

Thanks Richard

wootownpimp 04-18-2018 08:19 PM
Re: Parting 72 burb
 
Do you still have the Liftgate?

What kind of shape is it in?

richard2717 04-18-2018 08:33 PM
Re: Parting 72 burb
 
Quote:
Originally Posted by wootownpimp (Post 8241863)
Do you still have the Liftgate?

What kind of shape is it in?
I have a couple of them. None are rust free but I suppose are still workable depending on skill level. I will try to get a picture of them tomorrow & post. Do you need glass and hardware as well or just a bare shell?

Richard

WannaBe68 04-22-2018 12:44 PM
Re: Parting 72 burb
 
Hi Richard,
This thread was recommended for my search for some Suburban ceiling bows.

Not looking for show, but without chips missing from the plastic would be great.
Thanks!

richard2717 04-22-2018 02:09 PM
Re: Parting 72 burb
 
Quote:
Originally Posted by WannaBe68 (Post 8244534)
Hi Richard,
This thread was recommended for my search for some Suburban ceiling bows.

Not looking for show, but without chips missing from the plastic would be great.
Thanks!
Sorry all out of bows at the moment.

Richard

WannaBe68 04-22-2018 04:40 PM
Re: Parting 72 burb
 
Hey thanks for the note - are these something you get in regularly or once in a blue moon?
Thanks again

richard2717 04-23-2018 06:41 AM
Re: Parting 72 burb
 
Quote:
Originally Posted by WannaBe68 (Post 8244672)
Hey thanks for the note - are these something you get in regularly or once in a blue moon?
Thanks again
It is one of them deals that I may not have something this morning but never know what will fall in place this afternoon. LOL just never know anymore

WannaBe68 04-23-2018 07:10 AM
Re: Parting 72 burb
 
I hear ya'...
If you do find a decent set please keep me in mind!

ajgriffin 05-03-2018 03:16 PM
Re: Parting 72 burb
 
Quote:
Originally Posted by richard2717 (Post 8151549)
I have sent the stands off to be rechromed and I have been working on buffing out the rest of the pcs. I am going to wait to see what the stand turn out like before deciding. The other pcs are buffing up really nice. I have a panel truck and 2 blazer projects that I was thinking of using it on one of them, but still up in the air at this point.

Richard
What's the verdict on the roof rack? Is it going to make it onto one of the projects or is it available?

richard2717 05-03-2018 03:21 PM
Re: Parting 72 burb
 
Quote:
Originally Posted by ajgriffin (Post 8253695)
What's the verdict on the roof rack? Is it going to make it onto one of the projects or is it available?
It has already been sold to another member here.

Richard

richard2717 05-20-2018 09:21 AM
Re: Parting 72 burb
 
Ttt

carryall 05-27-2018 09:56 PM
Re: Parting 72 burb
 
Quote:
Originally Posted by richard2717 (Post 8220406)
Dwayne
Here is what I have.

two good but not perfect 3rd door sills. One I cleaned up a bit with 0000 wool the other one should do the same





I have the filler neck out of the white sub but gotta figure out a way to get rest of locking cap off without a key

Attachment 1767060




I have this area from the same green suburban I can cut out

Attachment 1767059

Or


I have an auxillary gas setup from a parts truck. Same deal here I don't think i have key for the gas cap.

Attachment 1767061

Attachment 1767062

or



I have a 72 Blazer filler that I "might" part with. Not sure if I still have the rear cover, I can't seem to put my fingers on it at the moment. I need to make sure the one in one of my other projects is good b4 I let it go though.

Attachment 1767063

I would need to get them removed to make sure they are decent all the way around. Let me know which one would work better for you.
Do you have the area around the gas filler? I néed a square if possible

T0ple55 05-28-2018 02:35 AM
Re: Parting 72 burb
 
Looking for a front passenger side bottom half a pillar complete with door mounting plates. Thanks

richard2717 05-28-2018 07:36 AM
Re: Parting 72 burb
 
3 Attachment(s)
Quote:
Originally Posted by carryall (Post 8269724)
Do you have the area around the gas filler? I néed a square if possible
I have already sold that one but I do still have this cut out available. $30 plus shipping and can cut it down based on what you need.

.

richard2717 05-28-2018 07:39 AM
Re: Parting 72 burb
 
2 Attachment(s)
Quote:
Originally Posted by T0ple55 (Post 8269854)
Looking for a front passenger side bottom half a pillar complete with door mounting plates. Thanks
I have this one. It appears in good shape but I won't fully know until I pull the fender. How high up do you need it? I will try to remove fender today depending on weather. We have had boat loads of rain overnight and still happening on and off this morning.

.

carryall 05-28-2018 10:17 AM
Re: Parting 72 burb
 
Quote:
Originally Posted by richard2717 (Post 8269879)
I have already sold that one but I do still have this cut out available. $30 plus shipping and can cut it down based on what you need.

.
How much would shipping be to 26704

T0ple55 05-28-2018 11:16 AM
Re: Parting 72 burb
 
About exactly half should work just fine. Thanks again!

richard2717 05-28-2018 12:11 PM
Re: Parting 72 burb
 
1 Attachment(s)
Quote:
Originally Posted by carryall (Post 8269989)
How much would shipping be to 26704
If I cut it at the size I have boxed in in red it would be $18 shipping That is roughly a 12'' square. PP is in my signature if you want it

Thanks
Richard

carryall 05-28-2018 12:15 PM
Re: Parting 72 burb
 
Quote:
Originally Posted by richard2717 (Post 8270059)
If I cut it at the size I have boxed in in red it would be $18 shipping That is roughly a 12'' square. PP is in my signature if you want it

Thanks
Richard
That will work. I'll take it.

carryall 05-28-2018 12:22 PM
Re: Parting 72 burb
 
Quote:
Originally Posted by richard2717 (Post 8270059)
If I cut it at the size I have boxed in in red it would be $18 shipping That is roughly a 12'' square. PP is in my signature if you want it

Thanks
Richard


Just sent payment

richard2717 05-28-2018 12:36 PM
Re: Parting 72 burb
 
Quote:
Originally Posted by carryall (Post 8270071)
Just sent payment
Got your payment and will ship tomorrow


All times are GMT -4. The time now is 05:52 AM.
Page 7 of 12 « First 23456 7 89101112
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com