Re: His name is "George" 84' C10
 

william, that is looking good. I like the tool creation too!! neat idea! it may be copied....:metal: ;)

Re: His name is "George" 84' C10
 

Thanks. I've seen ones where they used vise grips, but this way seemed easier.

Re: His name is "George" 84' C10
 

Busy weekend with work, but wanted to give it a shot on getting this thing running. Everything plumbed, fenders on, exhaust ready to shoot fire.....But this didn't happen. Couldn't get the Fuel pump to run just with the Terminator X. Hot wired it to a switch and we were good. Got keyed ignition and fuel pressure. Engine cranks, but does not start. Time to double check everything and chase the bugs. Also have to fix a minor fuel leak at the pump. Glad I went with a shut off right out of the fuel cell or it would have been major. On a good note: Finally have a hood and looks like everything fits under it!

Re: His name is "George" 84' C10
 

Almost there!

I fought with a handful of bad sensors when I did my first fire. I managed to get TWO bad crank sensors and one bad cam sensor from the auto parts store. I thought I was losing my mind. Luckily my brother has an LS swap that I borrowed the sensors from (since I knew they were good) and it fired right up.

It wouldnt throw a code with the bad sensors because I couldnt get it running long enough. Just a thought if you cant get it to fire.

Re: His name is "George" 84' C10
 

Oh man, the one behind the starter?! Knew I should have replaced :) Will be a good starting point. Thanks for the info. My daughters boyfriend has a friend that does tuning. He's going to come by and see if I'm even telling the wizard the right info on the turbo? Wasn't completely sure about the timing/ psi. I've heard the MAT sensor can also throw things off. We'll see.....

Re: His name is "George" 84' C10
 

Lookin tough!

Re: His name is "George" 84' C10
 

Thanks! Hopefully it sounds the same.

Re: His name is "George" 84' C10
 

While I'm waiting on parts and the wiz kid to come by with the laptop, I'll continue on with what I can do. Drew this pic awhile back when I had my other C10 with plans on doing it, never panned out. Going for it on this one. Started with 2014 Silverado bumper and the motto in my head of "Let's cut it up" haha. Mocked up for now with zip ties (I need to by stock in zip ties) to see how everything fits. I'll be using OEM Headlights/ housing for fog lights and they will be fully adjustable, maybe yellow?

Re: His name is "George" 84' C10
 

Should be able to do the metal work and hopefully have it bolted up over the holiday weekend.

Re: His name is "George" 84' C10
 

The bumper actually doesn't look bad, I was surprised.

Re: His name is "George" 84' C10
 

I was surprised as well. Sometimes it looks good on paper and not in reality. Still have to take it in some on the sides and its going to be raised about and inch or two. Also plan on using some round stock to mimic the two hard edges that are on an OEM 73 bumper.

Re: His name is "George" 84' C10
 

I kinda like that...;) nice thought & good work.. will for sure be following to see how this developes..:metal:

Re: His name is "George" 84' C10
 

The bumper looks surprisingly good. I'm sure it will get better as you go

Re: His name is "George" 84' C10
 

Thanks. Its going to be a good amount of metal work.....

Re: His name is "George" 84' C10
 

Small update. Didn't get as much done as I would've liked over the Holiday. Ended up being a busy FD weekend. Bumper is hanging on its own, brackets made and some nip/ tucks done. Just have to do some round bar and fog light mounts, then mud.

Re: His name is "George" 84' C10
 

What are you doing with the rear bumper? I'm anxious to see it on the ground.

Re: His name is "George" 84' C10
 

I'm anxious as well. Hoping all my measures work out. Finished up the metal work on the front bumper and starting mud. Once I have it on I'll let his toes touch the floor, haha. For the rear, currently running a stock bumper with a homemade hitch. Going to axe that and build something that has a diffuser to show more of the tank.

Re: His name is "George" 84' C10
 

Very cool.

Re: His name is "George" 84' C10
 

Thanks, Fingers crossed this think starts soon.

Re: His name is "George" 84' C10
 

Sneak peek at the air damn and the rod work to mimic details of the OEM bumper. Air damn is very boxy now, but will be massaged a touch.

Re: His name is "George" 84' C10
 

That will be a nice detail.

Re: His name is "George" 84' C10
 

Some pics of me possibly destroying a cowl hood, haha. Hood did not clear the turbo and from previous threads @Tinydb84, looks like venting is a good idea. Went back to the old fenders to scavenge some pieces. Plan is to install some louvers on it and will also vent the back cowl section.

Re: His name is "George" 84' C10
 

I like where this is going

Re: His name is "George" 84' C10
 

I agree, can't wait to see more!!

Re: His name is "George" 84' C10
 

Ha, you would. I've seen that hood of yours.